Bids Are Invited For Hiring A Company From The Relevant Business To Repair The Access Gate And Front Fence Of The School Transport Center, For Smec, According To The Specifications Contained In The Description Memorial, Spreadsheets, Schedules And Other Documents Contained In Annex I.

Lot 1 - 1.1.1 Demolition Of Solid Brick Masonry, Manually, Without Reuse Af 09/2023, Lot 1 - 1.1.2 Removal Of Fences And Posts Manually Without Reuse Af 09/2023, Lot 1 - 1.2. 1 Manual Excavation For Baldrame Beam Or Running Shoe (Without Excavation For Placing Formwork). Af_01/202, Lot 1 - 1.2.2 Manufacture Of Formwork For Beams, Made Of Resin Plywood Sheet, E = 17 Mm. Af_09/2020, Lot 1 - 1.2.3 Insulated Shoe Frame, Baldrame Beam And Running Shoe Using 10 Mm Ca-50 Steel - Assembly. Af_01/2024, Lot 1 - 1.2.4 Concreting Walls, Fck=25 Mpa, Using Pump - Laying, Densifying And Finishing. Af_02/2022_Ps, Lot 1 - 1.3.1 Masonry For Sealing Solid Ceramic Blocks Measuring 5X10x20cm (Thickness 10Cm) And Laying Mortar Prepared In A Concrete Mixer. Af_05/2020, Lot 1 - 1.3.2 Chapisco Applied To Masonry (Without The Presence Of Gaps) And Concrete Facade Structures, Using A Trowel. Mortar Mix 1:3 Prepared In A 400L Concrete Mixer. Af_10/2022, Lot 1 - 1.3.3 Plaster Or Single Putty In 1:2:8 Mortar, Mechanical Preparation With 400 L Concrete Mixer, Manually Applied To Blind Facade Panels (Without The Presence Of Gaps), 25 Mm Thick. Af_08/2022, Lot 1 - 1.4.1 Simple U Profile, In Bent Laminated Steel Plate, E = 3 Mm, H = 200 Mm, L = 50 Mm (6, 83 Kg/M), Lot 1 - 1.4.2 Painting With Alkyd Base And Finishing Paint (Synthetic Graphite Enamel) Applied By Roller Or Brush On A Metal Profile Made In The Factory (By Coat). Af_01/2020, Lot 1 - 1.4.3 Ribbed Welded Steel Mesh, Ca-60, Q-113, (1.8 Kg/M2), Wire Diameter = 3.8 Mm, Width = 2.45 M, Spacing Mesh = 10 5 Open/Swing Door, In Iron Grating, With Flat Bar 3 Cm With Chrome Finish, 45 Mm Machine, Including Cylinder Key, Lot 1 - 1.4.7 Motor For Gates Up To 600Kg, Sliding, Automatic Sliding, Electronic, With Quick Opening With Ten (10) Remote Controls, Lot 1 - 1.5. 1 Rigid Threadable Conduit, Pvc, Dn 50 Mm (1 1/2), For Underground Electricity Distribution Network - Supply And Installation. Af_12/2021, Lot 1 - 1.5.2 Socket 2P+T 10A, 250V, Set Assembled To Overlay 4 Flame 0, 6/1, 0 Kv, For Terminal Circuits - Supply And Installation. Af_03/2023