Request For Quotation Household Items

Salt - Technical. Composition Without Sand. St Rk 2649-2015, Concrete Crown Ø 50 Mm. Crown On Concrete Outer Ø 50 Mm, On Concrete, Brick, Stone. The Mounting Diameter Of The Thread Is M 22. The Tip Of The Pobedite Teeth With A Centering Concrete Drill, A Shank-Extender For A Crown With A Length Of At Least 500 Mm. Gost 19527-74., Mixer - For Paints And Plaster Mixtures With A Hexagonal Tail. Material - Stainless Steel. Length - 400 Mm. Diameter - 100 Mm. St Rk Iso 12944-7-2013, Ppr Plastic Pipe - For Heating. For Soldering. Pipe Material - Polypropylene, Fiberglass. The Length Of The Segment Is 4 M. The Outer Diameter Is 20 Mm. The Wall Thickness Is Not Less Than 3.2 Mm. The Maximum Working Temperature Is Not Less Than 90 Degrees. The Maximum Working Pressure (Pn) Is 25 Bar. The Cross Section Is Round. Gost 32415-2013, Metal Pipe Clamp With Nut And Rubber Gasket, Diameter - 40 Mm. Standard Metal Fasteners With A Rubber Profile Are Offered With An M8 Bolt. Material - Galvanized Steel, Rubber Profile. Gost 24137-80, Beech Grater For Wood 36 Mm: Knife Width 36 Mm, Knife Thickness 3 Mm. The Knife Is Made Of High-Speed Steel. The Length Of The Planer Is 190 Mm. Weight 680 G. Knife Set - 2 Pieces. Gost 26 6 6 5 -9 7., Toilet Attachment 8*120 Mm. The Assembly Kit Includes A Toilet, A Water Heater, Etc. Plastic Eccentric Washers Protect Ceramic Products From Damage And Allow You To Precisely Adjust The Final Position Of The Installed Product. Decorative Cups With Protrusions, Equipped With A Threaded Pin, Are Intended For An 8 Mm Open End Wrench, And At The End Of The Pin There Is A Recess For A T25 Star Bit, Which Hides The Fasteners And Provides The Aesthetics Of The Attachment Point. Delivery Content. Threaded Pin Ø8x120 Mm-2 Pcs.; Plastic Dowel Ø11x60 Mm-2 Pcs.; Metal Nut M8 Key 13 Mm - 2 Pcs.; Metal Washer - 2 Pcs.; Plastic Eccentric Washer - 2 Pcs.; Plastic Decorative Cup - 2 Pcs. Gost No. 1153-76, The Universal Screw Is Intended For Fastening Plasterboard Sheets To Wooden Structures (With A Large Thread). A Sharp End Of Self-Tapping Screws, A Special Thread Profile And A Horn Head. Packaging - A Pack. The Type Of Fastener Is A Self-Tapping Screw. The Material Of The Fastener Is Steel. The Diameter Of The Thread Of The Fastener Is 3.5 Mm. The Length Of The Fastener Is 30 Mm - 40 Mm - 50 Mm. Gost 1145-80, Intersection Nipple - For Connecting Aluminum And Bimetallic Radiators By Means Of An External Thread. Material - Stainless Steel. Diameter - 20 Mm. Gost 31311-2005, Transitional Ppr Tee - For Pipes With A Diameter Of 32 Mm With A Transition To A Diameter Of 20 Mm At An Angle Of 90 Degrees And An Outlet For A Pipe With A Diameter Of 32 Mm. For Soldering. Material - Polypropylene. The Working Pressure Is Not Less Than 25 Bar. The Diameter Is 32*20*32 Mm. Wall Thickness - 0.4 Mm. The Maximum Temperature Of The Working Environment Is 90°C. Gost 32415-2013, Fum Tape Is An Elastic, Durable, Chemically Resistant Sealant That Preserves Its Properties In A Wide Range Of Temperatures, Which Is Used To Create Hermetic Threaded And Flanged Connections In Plumbing And Gas Pipeline Connections. Length - 12 M. Width - 12 Mm. Thickness - 0.1 Mm. The Light Is Yellow. Density - 0.7 G/Cm3. Gost 24222-80, Polypropylene Coupling D32 - For Connecting Pipes With A Diameter Of 32 Mm, Made Of Polypropylene. The Working Pressure Is Not Less Than 25 Bar. Outer Diameter - 32 Mm. Wall Thickness - 0.4 Mm. The Maximum Temperature Of The Working Environment Is 90°C. Gost 32415-2013, Snail Dowel - For Plasterboard With Screws. Diameter - 10.0 Mm. Length - 50.0 Mm. Material - Metal, Plastic. Gost 26998-86, Floor Brackets - For Heating Radiators 80 Mm. Floor Mounts For Aluminum And Bimetallic Radiators Have A High Thickness And Allow You To Securely Place The Radiator On The Floor. During Installation, The Horizontal Surface Of The Radiator Is Placed On The Hinge And Is On It During Operation. Gost 31311-2005, Pipe Insulation - For Thermal Insulation Of Pipelines And Equipment In Heating Systems, Hot And Cold Water Supply, Sewage And Air Conditioning Systems, Refrigeration Units Serves To Reduce Structural Noise, As Protection Against Freezing, Condensation And Corrosion, Moisture-Proof Material, Completely Not Subject To Rotting. Insulation Material - Foamed Rubber. The Thermal Conductivity Class Of The Material Is Low. Environmental Safety Of The Material - Safe. Diameter - 100 Mm. The Length Of The Segments Is 2 Meters. Sn Rk 4.02-02-2011, Ppr Bend 90°. For Soldering. Material - Polypropylene. The Working Pressure Is Not Less Than 25 Bar. Outer Diameter - 32 Mm. Wall Thickness - 0.4 Mm. The Maximum Temperature Of The Working Environment Is 90°C. The Angle Is 90°. St Rk 1129-2002, Ppr Bend 90°. For Soldering. Material - Polypropylene. The Working Pressure Is Not Less Than 25 Bar. Outer Diameter - 20Mm. Wall Thickness - 0.4 Mm. The Maximum Temperature Of The Working Environment Is 90°C. The Angle Is 90°. St Rk 1129-2002, Flexible Marble Is A New Innovative Material. Sheet Sizes 142X284 Cm. Composition - 90% Marble/Quartz Fraction, Acrylic Binder, Flexible Base. Thickness - 2 Mm. Weight 2-2.5 Kg/M2. Operation From -45 To 600°С. Frost-Resistant (F100). The Service Life Is More Than 25 Years. 90% Natural. Ecological. Universal. Gost 3262-75, Gas Wrench No. 1 - Intended For Professional Use In Plumbing And Metalwork. High-Quality Chrome Vanadium (Cr-V) Steel. Induction Hardening Of Teeth To A Hardness Of 53-59 Hrc. The Special Shape Of The Sponges Allows You To Withstand Large Loads. The Inclination Of The Teeth Ensures A High Gripping Force. Length - 330 Mm. Type - Pipe Wrench S-Shaped 45 Degrees. Max. Throat Size 1 Inch. The Volume Is 0.001 M3. Weight - 0.8 Kg. Gas Wrench No. 1, It Is Suitable For Working With Pipes Or Parts With A Diameter Of 10 To 36 Mm. Gost 18981-73., Polypropylene Coupling D20 - For Connecting Pipes With A Diameter Of 20 Mm, Made Of Polypropylene. The Working Pressure Is Not Less Than 25 Bar. Outer Diameter - 20 Mm. Wall Thickness - 0.3 Mm. The Maximum Temperature Of The Working Environment Is 90°C. Gost 32415-2013