Request For Quotation Purchase Of Building Materials

Primer Is Used To Prepare Structures And Surfaces For Finishing. The Composition Of This Building Material Includes Additives, Solvents, Fillers And A Binding Element. It Evens Out The Surface, Contributing To Further Uniform Coverage. A Primer Is Needed To Improve Adhesion With Putty, Paint Products, And Wallpaper Glue. It Reduces The Consumption Of Finishing Materials, Speeds Up The Painting Process, And Also Increases The Service Life Of Treated Surfaces. The Priming Composition Improves The Resistance Of The Surface To Adverse Effects, Prevents Mold And Rot., Water Emulsion For Exterior Work Application: For Painting Facades And For Interior Work In Wet Rooms. Characteristics: After Drying, It Forms A Smooth Matte Surface; Whiteness 90%; Has High Water And Weather Resistance; Has Good Adhesion To Concrete, Brick, Plasterboard Plastered Surfaces; Forms A Breathable Coating; Can Be Colored With Coloring Pastes; Light-Resistant (Does Not Yellow During Use).. Consumption: 160-180 G/M², Paint Roller With A Handle, Roller Material Polyacrylic Roller Length, Not Less Than 250 Mm, Roller Diameter, Not Less Than 48 Mm, Pile Length, Not Less Than 11 Mm, Handle Material Plastic, Needle Length, Not Less Than 8 Mm, The Facade Spatula Is A Device Intended For Finishing Works. The Shape Of The Spatula Is Smooth, The Width Of The Blade Is Not Less Than 300 Mm, The Material Of The Blade Carbon Steel, Handle Material Is Plastic, Construction Gypsum Mixture Density – 800–1100 Kg/M³ (For Comparison: The Density Of Cement Plaster Is 1.5–2 Times Higher – 1600–1800 Kg/M³). The Maximum Grain Size Is Up To 1.25 Mm. The Permissible Thickness Of The Layer Is 5–50 Mm Without Reinforcement, In Recesses Up To 70 Mm. The Grade Of Mobility Of The Solution Is Pk3. The Thermal Conductivity Of The Finished Layer Is 0.23–0.3 W/(M×°С). Operating Temperature - From -50 To +70°С Vapor Permeability Of The Finished Layer - 0.11–0.14 Mg/M×H×Pa. The Color Is White., Cement Is A Binding Substance That Is Widely Used In The Construction Industry. The Material Has High Technical Characteristics: Compressive Strength Up To 49 Mpa; Bending Strength Up To 5.9 Mpa; The Onset Of Contraction No Earlier Than After 45 Minutes; The Total Drying Time Is 10 Hours; The Average Bulk Density Is 1300 Kg/M3; Cement Mortar Density Up To 3200 Kg/M3., Work Gloves With Pvc Coating: - Long Fingers, Long Cuff With A Good Wrist Circumference, High-Quality Overlock With Bank Elastic - Dot Pvc Polymer Coating With Plasticizer On The Palm Part - Filling With A Continuous Layer On The Pads Of The Fingers