Bids Are Invited For Installment Acquisition Of Furniture To Meet The Needs Of Municipal Schools In This Municipality Of Hope - Pb

Steel Cabinet - Tall Steel Cabinet, Divided Vertically Into Two Compartments By Means Of Dividers With Independent Doors, Equipped With Four Removable And Adjustable Shelves In Each Compartment. Dimensions And Tolerances Width: 900 Mm +/- 10 Mm; Depth: 400 Mm +/- 10 Mm; Height: 1980 Mm +/- 10 Mm; Tolerances For Paint Layer: Minimum 40 Micrometers / Maximum 100 Micrometers. Characteristics; Body, Partitions And Doors In Cold Rolled Steel Sheet - Plate 22 (0.75 Mm).; Shelves And Door Reinforcement In Cold Rolled Steel Sheet - Plate 20 (0.90 Mm).;Base In Cold Rolled Steel Sheet - Plate 18 (1.25 Mm).;Door Locking Bars Ø = 1 /4 (Minimum). Internal Hinges Not Visible On The Exterior Of The Furniture Made Of Cold-Rolled Steel Sheet - 14 Sheet (1.9 Mm) With A Minimum Of 75 Mm In Height - Three Units Per Door; Fully Metal Handle And Canopy, With Cremona System Locking.;Cylindrical Barrel Lock Built Into The Handle With A Minimum Of 4 Pins.; Duplicate Keys Attached To Corresponding Door Handles; Printed Or Overlaid Label Holder, The Latter Being Exclusively Made Of Chrome-Plated Non-Ferrous Metal Alloy.; Painting In Epoxy/Polyester Hybrid Powder Paint, Glossy Electrostatic, Polymerized In An Oven, Minimum Thickness Of 40 Micrometers In Gray. Guarantee; Minimum Of Three Years From The Date Of Delivery, Against Manufacturing Defects And Oxidation., Steel File - Sliding Steel File With Four Drawers Mounted On Telescopic Rails That Allow Total Opening. Dimensions And Tolerances; Height: 1330 Mm +/- 10 Mm; Width: 470 Mm +/- 10 Mm; ;Depth: 710 Mm +/- 10 Mm;; Tolerances For Paint Layer: Minimum 40 Micrometers / Maximum 100 Micrometers. Characteristics; Body And Internal Structure In Sheet Steel 22 (Thickness 0.75Mm) In Gray; Drawers In Sheet Steel 24 (0.60Mm); Telescopic Rails And Zinc Plated Guides In Plate 18 (1, 20Mm) Or Higher; Sheet Metal Drawer Locking Rod 16 (1.50Mm); Lower Closing (Next To The Floor) In Plate 24 (0.60Mm).; Zamac Handles In 96Mm Steel Finish.; Cylindrical Drum Lock (Minimum 4 Pins) With Simultaneous Drawer Locking System.; Duplicate Keys. Folder Compressors In All Drawers. Printed Or Overlaid Label Holder, The Latter Being Exclusively Made Of Chromed Or Nickel-Plated Non-Ferrous Metal Alloy; Drawers Equipped With Telescopic Rails Composed Of Linear Guides With Steel Ball Bearings, With A Minimum Vertical Load Capacity Of 45 Kg And Anti-Escape Mechanism. ;Chrome Metal Leveling Shoes With Injected Polypropylene Base.; Painting In Epoxy/Polyester Hybrid Powder Paint, Electrostatic, Glossy, Minimum Thickness Of 40 Micrometers In Gray Color.Guarantee; Minimum Of Three Years From The Date Of Delivery, Steel Bookcase - Steel Bookcase, With 6 Shelves In 5 Bays With Reinforcement Of Metal Sheets At The Bottom, To Avoid Displacement And Deformation Of The Bookcase Due To The Weight That Will Be Supported By It With The Minimum Characteristics Below: Height: 1.98 M; V Width: 0.92M; Depth: 0.40M; Number Of Spans: 05; Shelves: Plate #26 / 0.45 Mm; Columns: Plate Of At Least #18 L2 40 X 40; To Support Up To 30 Kg Per Tray, Adjustable Trays With Entire Detachable Structure, With Omega Reinforcement; Hexagon Screws With Unc Nut ¼ X ½; Painting: Powder Epoxy; In Gray Color; Reinforced Semi-Industrial Bookcase Made From Treated Steel Sheet