Request For Quotation Laboratory And Educational Stand For The Specialty Farmer For Operation And Repair Of Gas Equipment

Gas System Maintenance Training Stand For 2 Users: Hob (With Hook) And Boiler Educational Ready-Made Stand Installation Of Household Gas Equipment Dimensions (L X W X H): 2200X700x1800 The Stand Allows Installation And Adjustment Of The Following Equipment: Installation, Installation And Connection Of A Household Gas Stove. Installation, Connection And Adjustment Of A Wall-Mounted Gas Boiler. Assembly, Installation And Principle Of Operation Of The Gas Detector. Installation, Installation And Connection Of A Gas Meter To Household Appliances. General Requirements For The Installation Of Indoor Gas Wiring. Checking The Gas System For Tightness. The Stand Allows You To Install Elements Of The Gas Pipeline System, As Well As Connect Household Gas Equipment To The Heating System, To Study The Elements Of Household Gas Equipment And Its Components, To Master The Skills Of Maintenance, Installation, And Adjustment Of Equipment. The Stand Is A Frame Base Made Of A Metal Profile Painted With Powder Paint. The Base Has Swivel Wheel Supports With Brakes, Intended For Convenient Movement And Fixation Of The Stand. A Gas Distribution System With Household Appliances Is Mounted On The Frame Base. The Stand Includes: Frame Of The Laboratory Installation - 1 Pc.; Automation And Control Panel - 1 Set; A Set Of Connecting Pipes, Hoses And Shut-Off Fittings - 1 Set; Gas Wall-Mounted Boiler - 1 Pc.; Gas Stove - 1 Pc.; Gas Gas Meter - 1 Pc.; Gas Detector - 1 Pc.; Household Hood - 1 Pc.; Flow Detector - 1 Pc.; Mini Compressor (Air) - 1 Pc.; Methodical Descriptions Of Laboratory Work And Software - 1 Set. Unspecified Parameters And Characteristics Must Be Agreed With The Customer. In Case Of Non-Compliance With The Characteristics And The Above Specified Parameters, The Supplier Is Obliged To Change The Product. The Supplier Undertakes To Deliver And Unload The Goods To The Warehouse Independently., A Typical Set Of Educational Equipment Automation Of Heating, Gas Supply And Ventilation Systems Atgsv-09-11Lr-01 The Delivery Set Includes: – Educational Stand Automation Of Heating, Gas Supply And Ventilation Systems; – The Device For Inputting And Outputting Information In A Pc – Adc-Dac Board Type E14-140 Or Analog, Can Be Installed On The Stand; – Computer Controller Of The Stand (Laptop); – Manual On Operation; – Methodological Instructions For Carrying Out Laboratory Work., Laboratory Facility For The Study Of The Device, Work And Accounting In Heating Systems Study Of Devices And Accounting In Heating Systems. Testing And Adjustment Of Heating Devices And Automation Systems. Characteristics Dimensions (L X W X H): 1020X600x750 Laboratory Works Study Of The Device Of The Heating System And The Main Characteristics Of Heating Devices Determination Of The Heat Transfer Coefficient Of Heating Devices Determination Of Hydraulic Resistance Of Heating Devices Determination Of Consumed Thermal Energy Determination Of Boiler Thermal Power Influence Of The Performance Of The Circulation Pump On The Efficiency Of The Heating System Test Of Parallel And Serial Connection Of Heating Radiators Equipment Of The Laboratory Stand Laboratory Table With Metal Extension 1 Pc Automation And Control Panel 1 Set A Set Of Connecting Pipes, Hoses And Shut-Off Fittings 1 Set Electric Boiler 1 Pc Expansion Tank (Membrane) 1 Pc Circulation Pump 1 Pc Boiler Safety Group (Pressure Gauge, Safety Valve, Automatic Air Vent) 1 Set Bimetallic Section 1 Pc Aluminum Section 1 Pc Cast Iron Section 1 Pc Thermostatic Valve (Automatic) 1 Pc Pressure Sensors 1 Set Flow Meter With Pulse Output For Connection To The Measuring System 1 Pc Multi-Channel Board For Automatic Data Collection And Program Control Of The Experiment, Connected To A Computer 1 Pc Methodical Descriptions Of Laboratory Work And Software 1 Set The Stand Is A Frame Base Made Of A Metal Profile Painted With Powder Paint. The Base Has Swivel Wheel Supports With Brakes, Intended For Convenient Movement And Fixation Of The Stand., Laboratory Installation Automated Boiler House On Liquid And Gaseous Fuel Ak-01 Laboratory Installation Automated Boiler Room For Liquid And Gaseous Fuel In The Floor Version As A Whole, Including - A Physical Model Of The Boiler, Based On A Flow-Through Electric Water Heater, With Current Power Equal To The Current Power Of The Computer Model, Circulation Pumps Of The Boiler And Heat Networks, A Temperature Controller At The Boiler Outlet , Coolant Flow Meters In The Boiler Circuit And Heat Load With Electronic Readout, Pressure Drop Regulator In Heating Networks, Heat Load Module With Adjustable Power, Coolant Temperature Gauges At The Input And Output Of The Load, Coolant Leakage Module From The System, Equipment For Refueling And Topping Up The System With Coolant, Block Of Automatic Control Of The Boiler Room. • Pc With Win Os, Specialized Software. • Cables For Connecting A Pc. • Operating Instructions • Methodological Recommendations For Performing Laboratory Work., Laboratory Facility For The Study Of Various Heating Systems Study Of Various Heating Systems With Several Heating Devices For Comparison Characteristics Dimensions (L X W X H): 2350X750x1800 Laboratory Works Determination Of Hydraulic Resistance Of Heating Circuits Increasing The Efficiency Of The Underfloor Heating System By Adjusting And Controlling The Temperature Of The Coolant Due To The Mixing Of Direct And Reverse Flows Familiarization With The Design And Testing Of A Water-Air Heater Equipment Of The Laboratory Stand Frame Of The Laboratory Installation 1 Pc Electric Heater 1 Pc Water-Air Heater 1 Pc Aluminum Heating Radiator 1 Pc Steel Radiator 2 Pcs Coil Towel Dryer 1 Pc Flow Meter With Pulse Output 1 Pc Pump 1 Pc Three-Way Mixing Valve 1 Pc Temperature Sensor 3 Pcs Pressure Sensor 3 Pcs Flow Sensor 2 Pcs Programmable Controller For The Heating System 1 Pc Experimental Section Of Copper Pipe 1 Pc Multi-Channel Board For Automatic Data Collection And Program Control Of The Experiment, Connected To A Computer 1 Pc Methodical Descriptions Of Laboratory Work And Software 1 Set Control And Automation Panel 1 Set The Stand Is A Frame Base Made Of A Metal Profile Painted With Powder Paint. The Base Has Swivel Wheel Supports With Brakes, Intended For Convenient Movement And Fixation Of The Stand. Advantages And Features Automatic Process Control Connecting To A Computer Methodical And Software Included Simulator Mode