Bids Are Invited For Price Registration For Future And Eventual Contracting Company Specialized In Manufacturing, Assembly And Installation Of Custom Furniture, As Well As Acquisition Of Chairs, Armchairs And Appliances For The Annex Of The Municipal Chamber Of Primavera Do Leste - Mt, According To The Standard Established In Project.

Auditorium Armchair With Cup Holder (Color To Be Defined By Administration): The Structure Of The Armchair Must Be Developed By Industrial Tubes Of Mechanical Construction Made Of Carbon Steel Abnt 1008/1020, In Diameter Dimensions Of 22, 22 Mm And Must Have An Average Thickness Of 1.5 Mm, Formed By The Mechanical Tube Bending Process. A Frame Must Be Welded To The Upper Location Of The Seat Structure, Which Must Have The Functionality Of Articulating Sitting And Exiting Positions. An Abnt 1008/1020 Carbon Steel Plate With An Average Thickness Of 2.65 Mm Must Be Fixed To It For Perfect Fixation Of The Seat. Seat, At The Tip Of The Tube, A Coiled Recoil Spring Must Be Fixed, Which Must Be Made Of Eb2050 Wire, With A Vacuum Diameter Of 4.0 Mm, High Resistance And Durable, Dynamic Fatigue, Must Be Used For Synchronized Articulation Of The Assembly With Support In Engineering Thermoplastic (Polypropylene Copolymer) 38 Mm Wide And 42 Mm Deep, With Rounded Corners. It Must Also Have Two Industrial Tubes Of Mechanical Construction Made Of Carbon Steel Abnt 1008/1020, In The Front Configuration With A Diameter Of 25.4 Mm And A Thickness Of 1.5 Mm And A Total Length Of 355 Mm, In The Rear Configuration The Dimensions Must Rotate In 605 Mm Lathe With A Diameter Of 25.4 Mm, Average Thickness Of 1, With An Extension Greater Than That Of The Front Foot. For This Support (Pedestal) To Be Fixed To The Seat Structure, A Thermoplastic Wedge Must Be Developed..., Auditorium Armchair - Plus Size (Color To Be Defined By The Administration) - The Armchair Structure Must Be Developed Using Industrial Construction Tubes Abnt 1008 / 1020 Carbon Steel Mechanical, With Dimensions Of 25.40 Mm In Diameter And 1.90 Mm Wall Thickness, Where They Must Be Formed By The Mechanical Tube Bending Process, And Two Steel Sheets Called Supports Must Be Connected. , Which Must Be Manufactured From Abnt 1008/1020 Carbon Steel, With A Thickness Of 2.75 Mm, And Must Be Formed By The Stamping Process (Cutting/Bending/Drawing) And Finally Will Be Fixed By The Mig Welding Process. One Of These Supports Must Be Used To Fix The Assembly To The Floor, Using Flat Washers And Metric Hex Screws M8 X 49.0 Mm Or Self-Tapping Screws With Expansion Plugs. The Other Support Must Consist Of Two Rivets With Nuts, Which Must Be Made Of Carbon Steel With A Bichromatic Finish, Which Must Be Used To Assemble The Mechanism. The Entire Structure Must Receive Metallic Surface Preparation Protection Using Nanotechnology (Nanoceramics), And Must Be Coated In Electrostatic Epoxy Powder, Which Must Guarantee Protection And A Longer Useful Life For The Product. The Mechanical Assembly Must Consist Of Three Support Supports, Two Of Which Must Be Manufactured From Abnt 1008/1020 Carbon Steel Sheet, With A Thickness Of 2.0 Mm, Where They Must Be Formed And Drilled Through The Stamping Process. At Location..., Tela President Chair (Black) The Chair Must Have Five Castors, Each Of Which Must Be Made Up Of 2 (Two) Circular Pulleys Measuring 50 Mm In Diameter And Must Be Made Of Thermoplastic Called Of Polyamide (Pa 6, 6) And Pu At Its End, Where They Will Be Dedicated For Use On Hard Floors. The Caster Body Must Be Made In A Semicircular Shape And Must Be Made Of Thermoplastic Material Called Polyam