Tenders Are Invited For Construction Work – Pergamonmuseum, Basic Repairs And Additions To Construction Section B - Shell I - Award 1216/2024

Construction Work – Pergamonmuseum, Basic Repairs And Additions To Construction Section B - Shell I - Award 1216/2024. • For The Conversion Of The Pergamon Museum (Ba B), A Partial Demolition Of Existing Structures Is Required: - Construction Site Equipment: In The Form Of Enclosure Around Existing Tga Pipes, Installation Of Fall Protection Approx. 40M, 2 Temporary Pedestrian Bridges, - Shell Construction Work: - Demolition And New Construction Of The Ceiling Above The Ms E00 Installation Corridor, Approx. 45 M3 - Creation Of Installation/Assembly Openings In The Facade And Existing Ceilings By Partially Dismantling The Wall And Ceiling Structures, Some With Supports, 3 Pieces. - Partial Dismantling Or Demolition Of Parapets To Create Construction Site Access - Dismantling The Staircase E10-20 In Component Sk, Made Of Concrete Steps 28 Pieces With Natural Stone Handrail Approx. 4 T, - Selective Dismantling Of A Connecting Corridor (Pst Connector) In Front Of Components Ms, Steel Construction With Sandwich Facade L Approx. 13.00 M, W Approx. 2, 00 M, Ok Approx. +8.0 M, Uk Approx. +4.0 M From Okff - Dismantling Of A Balcony On The Ms Component, Approx. 16 M2 (Concrete Slabs With Steel Substructure - Demolition Of Various Masonry Walls And Ceilings In The Existing Building, Approx. 83.5 M3 - Demolition Of A Staircase And Ramp System In The Outside Area, On The Ms Component, L X W: Approx. 22.00 X 4.50 M - Breakthroughs (Approx. 13 Pcs.) And Core Drilling (Approx. 22 Pcs.) For Building Media And Air Conditioning - Manufacture Of Masonry Partition Walls, Brick Lining Of Openings To Separate Components - Manufacture Of Building Supports, Wall Support, Subsequent Opening Covering With Steel Beams In The Existing Building - Supporting Scaffolding For Concrete Work - Construction Services For As-Built Investigations: - The Services Are Summarized In Measures And Are Used For: - Exploring The Existing Shafts In Masonry Walls And Pillars - Exploring The Cavities In Load-Bearing Masonry Walls And Pillars - Exploring The Supporting Structure Of The Brick Vaulted Ceilings And Their Floor Structures Including The Steel Construction Additions Such As Tension Bands - Exploring The Steel Supporting Structure In Walls With Masonry Infill Or Cladding - Exploration Of Stone Iron Ceilings And Support Layer, - Height Of The Steel Structure, As Well As The Ceiling Structure On The Top And Bottom - Exploration Of The Construction Of The Stairs - Exploration Of Window Lintels, Determination Of The Support Position And Construction In The Lintel Area - Exploration And Examination Of Historical Rabitz Constructions, Exhibition Object - Exploration Of Steel Construction Of Supports Made From Assembled Historical Steel Profiles As The Basis For Planning For Structural Reinforcement - Technical Building Equipment: House Entries Must Be Subsequently Carried Out In The Existing Masonry External Wall Of Room R 00.200 Along Axis 29B. Earth Electrode And Wall Bushings Must Be Carried Out According To The State Of The Art, In Particular According To Din 18014 And Din Vde 0185. • Documentation In Accordance With The Bbrs Documentation Guidelines Dates: Start Of Service / Technical Preparation: October 25Th, 2024 End Of Execution: September 18Th, 2025 Binding Individual Deadlines