Request For Quotation Purchase Of Medical Goods

The Multirotator Provides The Implementation Of Several Types Of Movement: Rotary Movement, Reciprocating (Oscillating) Movement, Shaking In One Module. These Tool Options Significantly Expand The Possibilities And Increase The Efficiency Of Sample Preparation Of Tested Materials, Allowing You To Adjust The Nature Of Mixing In Accordance With Individual Tasks. Rotary Movement Speed Adjustment Range 1–100 Rpm (Step 1 Rpm), Vertical Rotation 360°, Rotary Movement Timer 0 - 250 Sec, Swinging Movement Speed Adjustment Range 1–100 Rpm (Step 1 Rpm) , Rocking Movement - Tilt Angle Adjustment 1° - 90° (Step 1°), Rocking Movement Timer 0 - 250 Sec, Shaking Movement / Pause Angle Of Rotation 0° - 5° (Step 1°), Shaking Movement / Pause Timer In Shaking Mode Or Pause 0 - 5 Sec, Digital Time Setting 1 Min.–24 H. / Continuous (Step 1 Min.), Current Consumption / Power 12 V, 660 Ma / 8 W, External Power Supply Input. Ac 100–240 V 50/60 Hz; Exit Dc 12 V, Warranty Of At Least 12 Months, Commissioning Of Medical Equipment Is Included In The Price: Preparation, Installation, Commissioning, Training Of Medical Personnel, Execution Of Commissioning Act, Etc., An X-Ray Cloak Is A Special Item Of Clothing That Is Used To Protect The Neck, Thyroid Gland, Torso, And Shoulder Area From X-Ray Radiation During Medical Procedures, Such As Chest Or Back X-Rays, Made Of Material Capable Of Absorbing Or Scattering X-Rays In Order To To Prevent The Penetration Of The Ego Into The Tissues Of The Body, The Length Of Clothing Not Less Than 380 Mm, Width Of Clothing Not Less Than 600 Mm, Lead Equivalent 0.35 Pb/Mm, Protective Material Leaded Polyvinyl Chloride, Warranty Not Less Than 12 Months, One-Sided X-Ray Protective Apron (Lead Equivalent Of 0.5 Pb.) Size Lm (56-60), The Length Of The Apron From The Middle Of The Shoulder To The Lower Edge Of The Product Is Not Less Than 110 Cm, X-Ray Protective Material - Leaded Polyvinyl Chloride (Ec Production), The Apron Has Velcro Fasteners On The Sides Of The Product, The Warranty Is Not Less Than 12 Months, Petri Dish, Sterile, 90 Mm, In A Package Of At Least 10 Pieces, Laboratory Glass, Covering, Size 26X76, A Wide-Mouth Jar With Screw-On Lids, Sterile, 200 Ml, Azur-Eosin According To Romanovsky, Folding Tripod For Test Tubes, Aluminum, 6 Sockets, The Laboratory Centrifuge Is Intended For The Separation Of Solutions Into Fractions, The Speed Of Rotation Of The Rotor Is Up To 3500 Rpm, Setting And Display On The Light Indicators Of The Speed Of Rotation Of The Rotor, As Well As The Possibility Of Setting The Speed Of Rotation In Ocu Or G, Locking The Lid During Operation, An Imbalance Sensor, Automatic Unlocking And Partial Opening Of The Lid And Sound Alarm After The Rotor Stops, Precise Digital Setting Of The Rotor Speed, Practically Unlimited Mode Of Continuous Operation, At Least 6 Degrees Of Braking, The Possibility Of Using At Least 7 Types Of Rotors, Centrifugation Speed From 100 To 3500 Rpm, Maximum Centrifugal Force Rcf 2300, Maximum Noise 55Db, Permissible Temperature Range 10-40°C, Permissible Humidity At 20°C, 80%, Power Supply 220/50 V/Hz, Power Consumption Up To 320W, Maximum Heating Of Test Tubes Above Room Temperature 20 Min 7.5 °С, Rotors Used In A Medical Centrifuge: Universal Rotor For 24 Stainless Steel Adapters, Universal Rotor For 12 Stainless Steel Adapters, Universal Rotor For 4 Adapters Of 50 Ml, Rotor For Gel Cards, Universal Rotor For 12 Adapters Made Of Stainless Steel, With A Working Angle Of Inclination Of 10°, Universal Rotor For 6 Adapters Of 50 Ml Each, A Guarantee Of At Least 12 Months, The Price Includes The Commissioning Of Medical Equipment: Preparation, Installation, Commissioning, Training Of Medical Personnel, Drawing Up Of The Act Of Commissioning Etc., The Floor Mechanical Height Meter Is Intended For Measuring The Height Of Adults And Children Older Than One And A Half Years, Has A Metal Base And A Bar, A White Polymer Powder Coating, A Measuring Scale, A Slider And A Measuring Bar Made Of Abs Plastic, Protected From External Damage And Easily Disinfected, The Structure Is Collapsible, The Largest Limit Of Standing Height Measurement (Npi) Is 2.2 M, The Smallest Limit Of Standing Height Measurement (Nmpi) Is 0.8 M, The Price Of The Scale Division (D) Is 1 Mm, The Error Of Measuring The Patients Height Is ±4 Mm, The Range Of Working Temperatures Is (+10 ) Up To (+40) ºс, Overall Dimensions Not Less Than 400X400x2500 Mm, Warranty Not Less Than 12 Months, Presence Of Declaration Of Conformity, Certificate Of Measuring Instruments, Initial Verification, Complete Set: Base - 1 Pc., Upper Rod - 1 Pc., Lower Rod - 1 Pc., Screw A.M6-6Gx30.48 Gost 17473-80 (Fastening Of The Rod To The Base) - 4 Pcs., Screw M3-6Gx6.58 Gost 17475-80 - 6 Pcs., Template L=0.800 M - 1 Pc., Cooking By Operation - 1 Copy., A Thermo-Insulating Container With Automatic Heating And Maintenance Of The Temperature Of Infusion Solutions, Provides Heating Of Cold Infusion Solutions, As Well As Maintenance And Preservation Of The Working Temperature Of The Solutions, Good Thermal Insulation Of The Container Allows It To Be Used In Conditions Of Negative Environmental Temperatures, Economical Energy Consumption From The On-Board Network (No More Than 3 ,7A). Thermal Container Made Of Moisture-Resistant Awning Fabric With A Heat-Insulating Frame, The Internal Volume Of Which Is Divided Into Two Compartments, Large (For 4 Bottles) And Small (For 2 Bottles), Each Of Which Is Equipped With Its Own Heating Element And Fan. The Thermocontainer Operation Algorithm Ensures Alternate Heating Of Both Compartments, So That Both Compartments Begin To Warm Up, But The Priority Of The Earliest Achievement Of The Working Temperature (33° C) Is Reserved For The Small Compartment. For Convenient Placement And Avoidance Of Mutual Contact Of Vials, The Container Is Equipped With Removable Dividers. For Ease Of Use, The Container Has A Shoulder Strap And A Handle For Removing It From The Transport Compartment Of The Car. The Thermocontainer Is Powered By The Cars On-Board Network. When The Voltage On The Power Source Drops Below 12.8 V, The Container Automatically Turns Off, Which Allows You Not To Turn It Off To Avoid Discharge. The Capacity Of The Bottles Is 6 Bottles Of 400 Ml Each, With A Diameter Of No More Than 80 Mm And A Height Of No More Than 210 Mm. 2000 Hours Of Average Failure Time, Type Of Protection Against Electric Shock Class Ii, Degree Of Protection Against Moisture Penetration Ipx4, Type Of Climatic Performance U1.1, Warranty Of At Least 12 Months, The Laboratory Centrifuge Is Intended For Separating Samples Of Biological Fluids And Solutions Into Fractions, Low Noise Level At Maximum Speed, Safe Locking Of The Lid, Express Centrifugation Function, Digital Timer, 5 Levels Of Rotor Braking, Rotor Imbalance Sensor, Patented Magnetic Rotor Cover, Rotor 50.01, Rotor Speed 1000-15000 Rpm, Installation Step 100 Rpm, Maximum Centrifugal Force Rcf 15294, Installation Step Rcf 10 , Setting The Timer From 0.1 To 99 Minutes, The Number Of Degrees Of Braking Is Not Less Than 5, The Permissible Humidity Of The Environment At 20°C, % 80, Power Supply From The Network 100-240V, 50-60Hz, Through The Adapter 24V Dc / 5A, The Maximum Consumption Power 120 W, The Number Of Test Tubes In The Rotor Is Not Less Than 12 Pieces, The Volume Of Used Test Tubes Is 1.5; 2; 0.2; 0.5 Ml With The Use Of Adapters, The Angle Of Inclination Of The Test Tubes In The Rotor Is 45 Degrees, The Warranty Is Not Less Than 12 Months, The Price Includes The Commissioning Of The Medical Equipment: Preparation, Installation, Commissioning, Training Of The Medical Personnel, Drawing Up The Act Of Commissioning, Etc., Tripod For Medical Systems, Four-Wheeled, The Number Of Holders Is Not Less Than 4, There Is Height Adjustment, Telescopic, The Range Of Height Adjustment Is 1200-2300 Mm, The Construction Of The Base Is All-Welded, The Frame Material Is Steel With Polymer-Powder Coating, The Color Is White, The Personal Mini-Centrifuge Is Used In The Isolation Of Rna/Dna, Precipitation Of Biological Components, In Biochemical And Chemical Analyzes Of Microsamples Of Substances. The Display Simultaneously Shows Three Rows Of Values: Centrifugation Time, Set And Current Speed Values, And Relative Centrifugal Force. The Brushless Engine Ensures Silent Operation At Maximum Speeds And A Long Service Life Of The Device. The Angular Rotor Is Intended For 12 Microtubes Of The Eppendorf Type. The Rotor Is Made Of Aluminum, Equipped With A Fixing Cover And Included In The Standard Set Of The Centrifuge. Constant Blowing Of The Rotor During Operation Reduces The Risk Of Overheating Of The Samples. Metal Protective Inserts In The Inner Parts Of The Centrifuge Body And Cover, Automatic Shutdown In Case Of Imbalance, As Well As Locking Of The Cover During The Operation Of The Centrifuge Ensure Safe Operation Of The Centrifuge. The End Of The Centrifuge Operation Is Accompanied By A Sound Signal. Speed ​​Control Range 1000 - 14,500 Rpm (Step 100 Rpm), Relative Centrifugal Force Control Range 50-12,400 × G, Digital Timer 15 S-30 Min, Acceleration Time Up To Max. Speed 20 Sec, Braking Time, No More Than 10 Sec, Lcd Display, Power Supply 230 V, 2.5 A/60 Hz, Current Consumption/Power 110 W (0.5 A), External Power Supply Unit Input. Ac 100-240 V 50/ 60 Hz, Output. Dc 24V, Warranty Of At Least 12 Months, Commissioning Of Medical Equipment Is Included In The Price: Preparation, Installation, Commissioning, Training Of Medical Personnel, Execution Of Commissioning Act, Etc., Pharmaceutical Refrigerator, 250 L