Bids Are Invited For Acquisition Of Permanent Equipment And Materials Destined For This Municipality, According To Cpp Itaipu 2023 – Ir 4110201/2023.

Electronic Scale With Ramp Electronic Scale With Capacity Of Up To 1000 Kg And 500 Gram Division, 1000Mm For Bale Weighing Certified And Standardized By Innmetro. Equipped With An Access Ramp With Structure In Sae 1008/1010, With 3Mm Sheet Thickness, 10 Degree Inclination And Anti-Slip Tapes On The Inclined Face, Fixed By Dowels. New Equipment With 12 Month Warranty After Installation., Small Biodigester Technical Requirements: Gas Tank Volume: 2,500L; Biodigestor Tank Volume: 4,000L; Uses Food (Kitchen) And/Or Animal Waste; Material: Polyethylene Canvas With Uv Protection; A Biogas Stove; External Gas Piping (Minimum 10 Meters) And Internal Gas Piping (Minimum 3 Meters); Gas Filter; Combined Gas And Fertilizer Output; Detailed Assembly Guide (Digital File); Warranty: Minimum 12 Months. Additional Recommendations: It Is Recommended That The Equipment / Installation Uses The Abnt Standard Nr Isso 23590 As A Reference - Home Biogas System Requirements - Design, Installation, Operation, Maintenance And Safety, With No Type Of National Or International Certification Being Mandatory. Motorized Forklift Motorized Forklift, Automatic Transmission, Triplex Mast Type, Minimum Lifting Height: 4000Mm. Equipped With Bale Grippers, Fire Extinguisher And Solid Tire. Equipped With: Hydraulic Lateral Shifter. With Operation And Maintenance Catalog, With Instructions On How To Operate The Equipment Safely. Minimum Load Capacity Of 2500Kg. New Vehicle With 12 Month Warranty., Waste Lifting Conveyor Waste Lifting Conveyor With A Minimum Length Of 6,000 Mm And A Maximum Of 10,000 Mm And A Width Of 1380 Mm; With Fixed Type Flights And Hopper With Metallic Structure Lining The Gap In The Lower Part Of The Conveyor. Monoblock Type Structure Built With Steel Plates. Flat Base In Steel Plate For Belt Sliding. Usable Canvas Width 1000Mm And Flight Width 800Mm And Minimum Height 50Mm. Equipped With A Minimum 3 Hp Gearbox, Controlled Via A Frequency Inverter And Can Be Adjusted Using A Potentiometer To Regulate Its Speed From 0 To 8 M/M. Canvas With Flights And Pressed Clamp Type Splice For Lifting System And Side Seals. Electrostatic Painting. With Drive System For Emergency Shutdown For Equipment Operators., Waste Separation Mat Minimum Size Of 10500 Mm, Equipment With Metal Structure With Anti-Corrosion Coating, Equipped With Electric Reduction Motor Of Minimum 1Kw Product Dimensions: 1010Mm Height X 1380Mm Width X 10500Mm Length Being 1000 Rubber Side Protection To Prevent The Accumulation Of Waste On The Conveyor Belt. Flat Base In Sheet Steel For Sliding The Belt. System For Variation In Conveyor Belt Speed, Through Frequency Inverter And Potentiometer Controlling Belt Advance, Determining Speed ​​For Operation From 0 To 8 Meters Per Minute. Bearings With Adjustment System For Conveyor Belt Alignment. Machined And Galvanized Traction Rollers. Electrostatic Painting. With Trigger System For Emergency Shutdown For Equipment Operators., 20