Tenders Are Invited For Construction Work – Energy Efficiency Modernization Of Mgk Buildings

Construction Work – Energy Efficiency Modernization Of Mgk Buildings. During The Implementation Of The Construction Investment, The Winning Tenderer Must Carry Out The Following Renovation Works: A) Construction Works: • Demolition Works In Connection With The Facade • Heat Pump Foundation Works According To Static Design Plans • Subsequent Facade Insulation, Plaster Repairs And Painting On Protected Facades • Replacement Of Shutters, The Locally Protected In The Case Of Buildings, For Reasons Of Uniform Appearance And Building Physics, State-Of-The-Art Hinged Casement Windows, The Outer Wing With Single-Layer Glazing, The Inner Wing With Double-Layer Glazing, In The Case Of Buildings Not Subject To Local Protection, The Installation Of Plastic And Thermally Bridge-Free Aluminum Windows With 3-Layer Glazing Everywhere • New Flat Roof Layering With Subsequent Thermal Insulation, New Waterproofing And Layering • Insulation Of Unfinished Attics And Attic Floor Structures • Placement Of External Shading Blinds, Interior Textile Blinds And Mosquito Nets Main Quantities Of Construction Work: • Flat Roof Structures And Roof Structure Attic Insulation: 2655 M2 • Boarding Of High Roof Structures : 950 M2 • Facade Thermal Insulation, Facade Rockwool With Thermal Insulation Sheets 5850 M2 • Glass Fabric Mesh Reinforcement: 7165 M2 • Facade Covering Made Of Clinker Or Paving Bricks, 1400 M2 • Facade Painting 3405 M2 • Wooden Exterior Doors And Windows, Double-Layer Sash Windows 196 Pcs • Plastic Exterior Heat-Insulated With Enhanced Airtightness Placement Of Doors And Windows 425 Pcs • Construction Of Visible Ribbed Aluminum Facade, Curtain Wall 27 Pcs • Placement Of Thermal Bridge-Free Aluminum Doors And Windows 58 Pcs • Motorized Louvre Blinds And Interior Textile Blinds 509 Pcs • Installation Of Custom-Made Mosquito Nets 807 Pcs Description Of The Tasks Of The Architect: A) The Structures To Be Demolished Are Doors And Windows Marked On Demolition Plans, Doors With Wooden Frames, And Metal And Plastic Doors And Windows. The Flat Roof Layers Are Also Dismantled In The Places Marked On The Plans. B) Static, Support Structure Works: Heat Pump Foundation Works According To Static Plans. C) Insulation Of Flat Roof Structures And Roof Structure Attic Space: 5 Buildings With Flat Roof Structures - Dormitory, Canteen, Gymnasium, Neck Member Connecting The Gymnasium, Viii. S. Intact. Staircases And Building Parts Require A New Stratification From An Energetic Point Of View. The Slope Of The New Flat Roof Layer Is Being Prepared For The Existing Drainage. 2 High-Roof Structures Are Largely Uninsulated, Therefore The Unbuilt-In Attics And Attics Are Insulated: D) Facade Formation: Locally Protected Buildings Can Only Receive Facade Surface Plaster Repair And Painting. Buildings That Are Not Subject To Local Protection Receive Facade Thermal Insulation With A Layer Of Noble Plaster And, In Some Parts, Brick Facade Cladding. E) Doors And Windows: It Is Necessary To Replace Outdated Door And Window Structures With Modern Structures Equipped With Heat-Insulated Glazing. In The Case Of Buildings With Local Protection, A Connected Frame Case With 2 Layers Of Glazing On The Inside