Tenders Are Invited For Construction Work - Central Library - Energy Efficiency Development

Construction Work - Central Library - Energy Efficiency Development. Implementation Works For The Energy Efficiency Development Of The Central Library Of Semmelweis University. The Purpose Of The Investment Is Energy Savings And Safe Operation. The Investment Is Aimed At Renovation And Modernization Aimed At Increasing Energy Efficiency. It Is Currently Available To Users On A Net Floor Area Of ​​1,940 M2, With 300 Reading Places And 75 Computers. The Holdings Of The Central Library Are Approx. 260,000 Volumes. Number Of Journal Titles Available (Electronic And Paper): 7,850. - Property 53/2011 Is Located In A Historical Environment. (Viii. 25.) Nefmi R. Section 48. (2). -Heritage Affected By District Unique Protection: Protected Settlement Map, Bp. Főv. Viii. Circ. Józsefv. You Representation Body. 34/2017. (Ix.14.) Self-Reg. -Archaeological Site. A) Architecture: Installation, Demolition The Assembled Wall Structure Of The Inner Courtyard, The Slab Layer Order Of The Inner Courtyard, And The Inner Wings Of The Doors And Windows Of The Connected Gable Case Must Be Demolished. Also, On The 3Rd Floor Of The Street Facade, The Plastic Doors And Windows Installed In The Existing Case And The Metal Doors And Windows On The Basement Level Must Be Demolished. In Addition, The Windows And Doors Of The Air Shafts And Rear Facades (South And East) And The Single-Layer Windows Of The Main Stairwell Must Be Demolished. The Floor Coverings Of The Suspended Corridors, The Wire-Mesh Glazing Covering Of The Installed Elevator Shaft, And The Shell Of The Rear, South Wing Must Be Completely Demolished. Building Structures Foundation: Construction Of Two Point Foundations Is Required. Rising Walls: A New Facade Wall Is Being Built At The Attic Level Of The Brick Elevator Shaft. Slabs: A Slab Addition Is Being Prepared. It Is Necessary To Make A Partial Slab Replacement On The Closing Slab Above The 3Rd Floor. Carpentry Structures, Roofing: The Rear, South Wing Will Receive A New Shell. Facade Doors And Windows: The Upper Floor, Connected Shuttered Windows And Doors Of The Street Facade Need To Be Renovated. On The 3Rd Floor Of The Street Facade, We Are Making New Sashes Instead Of Plastic Doors And Windows. On The Street Facade, We Are Replacing The Metal Doors And Windows On The Basement Level With Three-Chamber, Steel Profiled Doors And Windows With Heat-Insulating Glazing. The Windows On The Rear Facades Will Be Replaced With Windows And Doors With Heat-Insulating Glazing, With External Shutters. Aluminum Curtain Wall With External Slatted Blinds In The Inner Courtyard. Thermal Insulation: 15 + 10 Cm Rock Wool Is Placed In The Roof Structure Of The Rear Wing, And 2X10 Cm Rock Wool Is Placed In The Attic. Interior Floor Coverings, Courtyard Covering: A Non-Slip Ceramic Covering Is Made In The Circulation Rooms Next To The Curtain Wall In The Inner Courtyard. Paving Of The Inner Courtyard With Cleaning. False Ceilings: New Cassette False Ceiling Sections Are Planned. Facade Formation: Placing An Architectural Metal Mesh To Cover The Mechanical Air Ducts. A Metal-Reinforced Sandwich Panel Is To Be Attached To The Side Wall Of The Installed Elevator Shaft, With Hidden Fastening. B) Building Engineering: 1. Heating And Cooling Technology Central Heating The Heat Generator Of The Planned Heating System Will Be 2 Condensing Wall-Mounted Gas Boilers. All Radiators Will Be Equipped With Pres