Tenders Are Invited For Reconstruction Of The Village Community Center Building In Łagiewniki, Chmielnik Commune (2)

1. The Subject Of The Construction Project Entitled Reconstruction Of The Building Of The Village Community Center In Łagiewniki, Chmielnik Commune Is The Thermal Modernization And Reconstruction Of The Building Of The Village Community Center Along With Internal Installations: Water And Sewage, Electricity, Central Heating. And Mechanical Ventilation. The Building Of The Community Center Is Located On Plots No. 379 And 381 In Łagiewniki, It Has Two Floors Above Ground And One Underground. Roof Covering Made Of Corrugated Asbestos Boards. Building Dimensions: Length - 22.08 M, Width 12.06 M, Height 9.46 M. ​​Total Area 522.00 M2, Volume 2,014.40 M3. 2. The Scope Of Investment Works Includes: 1) Insulation Of The Building Walls And The Façade With Structural Plaster, Insulation Of The Ground And Underground Parts Should Be Made Of 10.0 Cm Thick Xps Boards (20.0 Cm Thick In The Project). 2) Reconstruction Of Internal Installations: Central Heating, Water And Sewage Electrical And Mechanical Ventilation, In Terms Of Electrical Installation - The Installation Of An Alarm System In The Entire Facility Should Not Be Included In The Valuation. In Terms Of Sanitary Installations - Changes Should Be Made, The Mechanical Ventilation Installation System With A Separate Central Supply And Exhaust Air System Type Frapol Sky 500 Should Not Be Included In The Valuation In Rooms 0.80 And 0.10 - Taking Into Account Interchangeably In The Valuation Only The Installation Of Ventilation Ducts With A Diameter Of 125 - 2 Pieces Enclosed And Extended Above The Roof Of The Building, Equipped With Exhaust Anemostats In The Rooms And Equipped With Duct Fans 2 X 150.0 M3/H And Equipping 2 Windows With Hygro-Controlled Air Vents, 4 Pieces.3) Reconstruction Of Sanitary Facilities On The Ground Floor Along With Reconstruction Of Partition Walls ,4) Replacement Of Windows (Pvc) And Doors (External Aluminum And Steel Doors And Internal Doors), The Ordering Party Allows Pvc And Aluminum Joinery In Ral 7016 Color Only From The Outside. The Quote Should Include The Installation Of Windows Without Warm Installation. Internal Door Joinery Designed As Aluminum, It Should Be Priced As Made Of Reinforced Pvc (Only External Doors Should Be Left As Aluminum). 5) Replacement Of All Floors Along With Lowering The Floor Level In Order To Equalize The Level Of The Rooms. Floors Made Of Anti-Slip Stoneware Tiles.6) Finishing Of Walls And Ceilings - Renovation Of Plasters, Painting Of Walls And Ceilings, Ceramic Cladding Of Walls, Installation Of An Attic Hatch (Should Be Included In The Cost Estimate As Your Own Calculation),7) Replacement Of Roofs Over The Entrances To The Building (For Sheet Metal Galvanized, Coated Steel),8) Replacement Of The Roof Truss Along With The Replacement Of The Roof Covering (From Asbestos To Galvanized, Coated Steel Sheet) And Insulating The Ceiling Above The First Floor With Mineral Wool, The Scope Of The Valuation Also Includes The Valuation Of Scaffolding That Was Not Included In The Bill Of Quantities. Due To Lump Sum Settlement, Bill Of Quantities Is Auxiliary. It Presents The Dimensions And Scope Of Construction And Installation Works Consistent With The Designed Design. It Does Not Separately Take Into Account The Work Of Scaffolding, The Involvement Of Other Means And Equipment Necessary To Perform Basic Works (It Is Not Indicated In Separate Items). However, It Is Absolutely Part Of The Lump Sum Price. The Designer And The Ordering Party Will Not Interfere With The Involvement Of Equipment Related To The Technology Of Works, The Time Of Use Of This Equipment (Including Scaffolding), Leading To The Proper Performance Of Works That Are Part Of The Task And In Accordance With Health And Safety Requirements. Therefore, It Is Up To The Bidder To Decide What Type Of Equipment He Will Use And Whether He Will Include Its Price In The Lump Sum Offer. The Roof Covering Should Be Made Of Flat, Galvanized Steel Sheet. 0.50 Mm - Anthracite Color, Or Prefabricated Panels Imitating Standing Seam Flat Sheet Metal Covering (The Project Includes Full Formwork And Covering 06.0 Mm Thick). Sheet Metal Flashings Throughout The Entire Facility Should Be Made Of Galvanized - Coated Steel Sheets. 0.50 Mm (0.70 Mm In The Design). Fire Smart Bio Impregnated Formwork - It Is Allowed To Be Made As Openwork (Not Full) In Accordance With The Guidelines Of The Covering Manufacturer (Full Formwork In The Design). The Roof Gutter Can Be Installed In The Quote, Either Galvanized Or Coated Steel. And Alternatively, System Ones Made Of Anthracite-Colored Pvc. Roof Truss Structures - Should Be Made Of Certified Wood Of Class C24 (In The Project, Wood Of Class C30).9) Replacement Of Balustrades And Handrails At External And Internal Stairs.10) Construction Of A Ramp For The Disabled.11) Execution And Mounting An Information And Promotional Board Informing About Co-Financing Of The Project From The European Agricultural Fund For Rural Development Under The Rural Development Program For 2014-2020 In Accordance With The Provisions Of The Rdp Sign Visualization Book For 2014-2020 (No Item In The Bill Of Quantities, Please Add The Item As Your Own Calculation). Note: The Subject Of The Order Does Not Include The Construction Of An External Gas Connection. Please Do Not Price The Gas Connection Together With The Cylinder. The Ordering Party Is Waiting For The Decision To Issue A Permit For The Construction Of An External Gas Connection To The Building Of The Community Center In Łagiewniki. The Construction Of The Gas Connection Will Be The Subject Of A Separate Procedure.