Tenders Are Invited For Vehicle Repair And Maintenance Service Using Spare Parts And Materials Of The Contractor Iveco Trakker (2 Pcs)

Vehicle Repair And Maintenance Service (Iveco Trakker Ad 410T42h-4250 Vin: Wjmj4css6nc473251) Using Contractors Spare Parts And Materials, Includes The Following Volumes: Diagnostics Of Undercarriage And Steering Trapezoid - 0.3 N/H Drive Axle. Checking The Lufts Of Hubs - 0.1 N/Hr Gearbox. Fastening Travers Fastening Gearbox -1.6 N/H Front Axle. Replacement Of The Rmk Pin Of The Front Axle (Right) - 9.6 N/H Front Axle. Replacement Of The Rmk Pin Of The Front Axle (Left) - 9.6 N/H Rear Axle. Replacement Of The Oil Seal Tailstock - 1.9 N/H Rear Axle. Checking The Oil Level - 0.1 N/H Rear Axle. Adding Oil To The Main Gear - 0.1 N/H Hub And Wheel. Removing The Wheel And Installing The Wheel On The Hub - 0.64 N/H Hub And Wheel. Removing And Installing Paired Wheels On The Hub - 0.44 N/H Hub And Wheels. Inflating The Wheel 0.296 N/H Hub And Wheel. Tightening The Wheel Nuts With A Torque Wrench 0.2 N/H Wheel Balancing (Steel Disc) – 1.4 N/H Hubs And Wheels. Dismantling Tire From Wheel Disc - 1.12 N/H Hub And Wheel. Installation Of A Tire On A Wheel Disk - 1.12 N/H Cleaning The Sides Of The Disk From Corrosion - 0.64 N/H Steering. Removal Installation Of Transverse Steering Tie Rod - 2.8 N/H Steering. Tip Replacement. Thrust Removed - 2 N/H Cleaning Of The Threaded Part Of The Tip And Bushing Of The Cross Thrust - 2 N/H Electronic Stand. .Controlled Axis Geometry Check -1.05 N/H Electronic Stand. .Steering Wheel Position Alignment - 0.5 N/H Electronic Stand. .Checking The Geometry Of The Unguided Axis - 1.7 N/H Electronic Stand. .Ascent. Regulation - 0.2 N/H Electronic Stand. Alignment Of The Position Of The Rear Driver - 1.6 N/H Transmission Oil Q8 T 55 80W-140 208L - 15 L Assembly Paste 5Kg White With Sealant - 0.4 Kg Rmk Pins - 2 K-T Shaft Oil Seal - 1 Piece Steering Rod End . Daf, Iveco, Man, Mb, Renault – 2 Pieces Tip M30*1.5* Steering Rods. Right Daf, Iveco, Man, Mb, Renault - 2 Pieces Vehicle Repair And Maintenance Service (Iveco Trakker Ad 410T42h-4250 Vin: Wjmj4css6nc475012) Using Contractors Spare Parts And Materials, Includes The Following Volumes: Front Axle. Replacement Of The Rmk Pin Of The Front Axle (Right) - 9.6 N/H Front Axle. Replacement Of Rmk Pivot Of The Front Axle (Left) – 9.6 N/H Hub And Wheel. Removing The Wheel And Installing The Wheel On The Hub - 0.64 N/H Hub And Wheel. Wheel Inflation - 0.148 N/H Hub And Wheel. Tightening Wheel Nuts With A Torque Wrench - 0.2 N/H Wheel Balancing (Steel Disc) - 1.4 N/H Hubs And Wheels. Dismantling Tire From Wheel Disc - 0.56 N/H Hub And Wheel. Installation Of A Tire On A Wheel Disc - 0.56 N/H Technological Washing. Wheel Disc - 0.32 N/H Cleaning Disc Sides From Corrosion - 0.32 N/H Steering. Removal Installation Of Transverse Steering Tie Rod - 2.8 N/H Steering. Tip Replacement. Thrust Removed – 2 N/H Cleaning Of The Threaded Part Of The Tip And Cross Thrust Bushing – 2 N/H Electronic Ste