Bids Are Invited For Price Registration For Possible Supply Of Childrens Playground Toys That Will Be Intended For Outdoor Leisure Areas

Slide With Slider Measuring 2.50 Meters Long By 0.41 Meters Wide (Measurement May Vary By 5% Plus Or Minus). Other Measurements (Minimum): Height 1, 40 Meters, Length 2, 60 Meters. Made Of Carbon Steel Tubes Of At Least 1” In Diameter And 1.50Mm Thick And Folded Carbon Steel Plate Number 16, And Must Support The Weight Of Children. Phosphate-Based Or Galvanizing Surface Treatment, Painting With Electrostatic Powder Deposition System, Mig Welding. Zinc Plated Screws, Washers And Fastening Nuts. High Fixation Destructive Reflective Sticker Indicating Manufacturer Data And Warnings., Swing With 2 Seats. Made From Round Tubes Of High-Resistance Carbon Steel With A Diameter Of 2” The Structure Is Welded Using The Mig Process, Painted Using A Corrosion-Resistant Electrostatic Process, Has Treated Wooden Seats To Prevent Burns At High Temperatures And Plastic Tips For Protection Against Cuts. Minimum Dimensions: (Hxwxc) 2.00M X 1.00M X 2.70M., Swing With 3 Seats. Manufactured In Round Tubes Of High Resistance Carbon Steel With A Diameter Of 2” The Structure Is Welded By Mig Process, 00M Mig. Painted Wood Seat. Approximate Diameter Of 1.50 M (Capacity For 8 Children). For Fixing With Concrete. Upper Ends That Do Not Allow Water Penetration, Double Childrens Seesaw (Total Of 4 Seats) Made With Steel Tubes, Seat In Painted Wood, Zinc Plated Screws, With Corrosion-Resistant Electrostatic Painting, And Mig Welding. It Must Have A “Hand Grip” So That The Child Can Hold On To The Toy. Minimum Dimensions (Hxwxc) Of 0.50M X 1.20 X 2.00M. Boards Of At Least 2.00M In Length., Maze Cage, Toy Made Of Carbon Steel Tubes With Corrosion-Resistant Electrostatic Painting. Tubes With A Minimum Diameter Of 1” With A Minimum Thickness Of 1/8 Mm. Minimum Measurements: (Hxlxc) 2.50M. Mig Welded Pipes. Painting In At Least Three Colors With The Same Proportion (Possible Colors: Red, Yellow, Blue, Green, White And Orange). To Be Placed On The Ground., Double Bar, Equipment Is Manufactured In 2.1/2″ And 1.3/4″ Round Tubes With A Thickness Of 2 Mm And 4.75 Mm Sheets Of High Resistance Carbon Steel, The Parts Are Welded By Mig Process. It Has A Corrosion-Resistant Electrostatic Paint And Plastic Tips For Protection. Developed For Adults Over 1.4 M In Height Or 12 Years Of Age, It Supports Two People Weighing Up To 150 Kg. Minimum Measurements (Hxwxc) 2.00M Main Structure With Round Tube 3.1/2” And Secondary With Round Tubes 1”.1/4” With Closure On The Top Of The Vertical Tubes, Not Allowing Water To Enter The Piping. Mig Welding Process And Corrosion Resistant Electrostatic Powder Painting. Minimum Measurements (Hxlxc) 2.10M X 0.20M X 1.00M. Must Have At Least 8 Horizontal Bars., Arm Flexor (Sailor) Pair Made Of Carbon Steel, Main Structure With Round Tube 1.1/2” X 3”. Mig Welding Process And Corrosion Resistant Electrostatic Powder Painting. Minimum Measurement Of Each Structure: (Hxlxc) 0