Tenders Are Invited For Renovation Of Schools In The Biskupiec Commune

Part I Includes The Implementation Of The Construction Work Entitled: Comprehensive Energy Modernization Of The Building Of The Primary School. Jana Pawła Ii In Łąkorz”The Subject Of The Investment Task Is To Carry Out Construction Work Consisting In Thermal Modernization, Modernization Of The Interior And The Area Of ​​The Adjacent Building Of The Primary School In Łąkorz. Thermal Modernization Involves Insulating The Facade And The Roof Above The Attic Of Each Part Of The School Building And Replacing The External Windows And Doors. Modernization Of The Existing Central Heating System Is Also Planned. Consisting Of Replacing 5 Heat Pump Wells And Replacing And Adding Radiators With Thermostats, As Well As Moving Radiators In Some Rooms. Additionally, It Is Planned To Modernize The Lighting System By Replacing The Fixtures With Energy-Saving Led Ones, As Well As Installing Photovoltaic Panels And Replacing The Lightning Protection System. Interior Modernization Involves Widening Door Openings In Some Rooms And Replacing Door Frames And Door Leaves In Order To Eliminate Architectural Barriers. It Is Also Planned To Replace The Remaining Internal Doors. In Addition, Replacement And Addition Of Internal Glazing Is Planned In Some Rooms. It Is Also Planned To Install A New Internet Network And Modernize Electrical Installations, Including Switchboards Located On The Premises, As Well As Water And Sewage Installations, Bathroom Fittings And Washbasins In Classrooms. A Toilet For Disabled People Was Designed On The Ground Floor Of The Connector. In Connection With The Replacement Of Installations And The Installation Of New Ones, As Well As The Replacement Of Joinery, Work Is Planned To Be Carried Out Related To Repairs To The Existing Grooves, As Well As The Implementation Of New Paint And Floor Coatings. The Modernization Of The Area Involves Repairing Or Constructing New Ramps For The Disabled In Order To Eliminate Architectural Barriers, Constructing A Strip Covered With Concrete Paving Stones In Part Of The Buildings Perimeter, Providing Additional Area Lighting And Replacing The Substructure Under The Concrete Cubes In The Bus Maneuvering Area. Detailed Description And Method Of Order Execution. Includes - Design Documentation, Constituting Annex No. 7 To The Swz And Sst, Constituting Annex No. 8 To The Swz, As Well As The Bill Of Quantities Constituting Annex No. 9 To Swz4. Equivalent Solution: 2) If Trademarks, Patents Or Origins, As Well As Standards And Technical Approvals And Reference Systems Are Indicated In The Design Documentation, Sst, Bill Of Quantities Or Swz And Its Annexes, The Ordering Party Allows The Offer Of Solutions Equivalent To Those Indicated In The Above-Mentioned Procedure Documents, Provided That They Guarantee The Implementation Of Works In Accordance With The Design Documentation, Sst, Bill Of Quantities, Ensure Obtaining Technical Parameters Not Worse Than Those Assumed In The Design Documentation, Sst, Bill Of Quantities, Swz, And Will Be Consistent In Terms Of: A) Dimensions And Structure (Size, Type, Physical Properties And Number Of Components)B) Utility Character (Identity Of Function)C) Material Characteristics (Type And Quality Of Materials)D) Technical Parameters (Strength, Durability, Technical Data, Hydraulic Data, Linear Characteristics, Structures, Etc.)E ) Safety Parameters Of Use F) Emission Standards, 3) An Equivalent Solution Must Enable The Achievement Of The Goal Assumed By The Ordering Party Through Performance And Functional Parameters Affecting The Effectiveness Of Operation, Which Are The Same Or Better Than The Indicated Minimum Requirements; 4) Use In The Design Documentation, Sst, The Bill Of Quantities, Swz And Its Annexes, The Names Of Solutions, Materials And Devices, Are Used To Establish The Minimum Standard Of Workmanship And To Determine The Properties And Technical Requirements Assumed In The Design Documentation, Sst, Bill Of Quantities, Swz For The Designed Solutions, 5) The Contractor Is Obliged To Demonstrate That The Offered Equivalent Solutions Meet The Assumed Minimum Requirements6) The Ordering Party Informs That In Accordance With Art. 103 Section 1 Of The Public Procurement Law, The Requirements Referred To In The Above-Mentioned Provision Were Specified By The Contracting Authority In The Sst, Constituting An Annex To The Swz. In The Standards, Approvals, Technical Specifications And Reference Systems Referred To In Art. 101 Section 1-6 Of The Public Procurement Law, The Ordering Party Allows Equivalent Solutions Described In The Above-Mentioned Documents;