Tenders Are Invited For Reconstruction Of A Retention Water Reservoir On Plot No. 109 In The Town Of Naguszewo, Naguszewo Geodetic District, Rybno Commune.

1. The Subject Of The Order Is The Performance Of Design Works And Construction Works For The Investment Called Reconstruction Of A Retention Water Reservoir On Plot No. 109 In The Town Of Naguszewo, Naguszewo Geodetic District, Rybno Commune, Design And Execution Of Construction Works. The Scope Of The Planned Project Includes Preparing A Construction Design, Obtaining A Building Permit, Developing Technical Specifications For The Execution And Acceptance Of Construction Works, Bills Of Quantities And Other Documents And Studies Necessary To Implement The Project, Along With Obtaining Legally Required Arrangements, Opinions And Decisions. Reconstruction Of An Open, Earthen Water Reservoir With A Natural Bottom Absorbing Excess Rainwater By Removing Part Of The Vegetation (In The Reservoir Bowl And Around Its Perimeter), Scaling The Perimeter And Deepening, Restoring Power From The Northern Stream, Restoring The Overflow To The Reservoir Located To The West, Tidying Up (With Cuts) Sanitary) Existing Greenery. There Are No Plans To Build A Recreational Square. Payment For The Execution Of The Subject Of The Order Is Made In The Form Of A Lump Sum. 2. The Investment Order Is Co-Financed By The Rural Development Program For 2014-2020 For The Implementation Of Operations Such As Water Resources Management Under Sub-Measure 4.3 Support For Investments Related To The Development, Modernization And Adaptation Of Agriculture And Forestry3. The Scope Of The Subject Of The Order Includes: 1) Development Of A Construction Design, Obtaining A Building Permit, Development Of Technical Specifications For The Execution And Acceptance Of Construction Works, Bills Of Quantities And Other Documents And Studies Necessary To Implement The Project, Along With Obtaining Legally Required Arrangements, Opinions And Decisions. 2) Implementation Of The Construction Task In Accordance With The Developed Design Documentation: A) Marking Out Building Structures, B) Preparatory Works, C) Earthworks, D) Consolidation And Assembly Works. Attention! The Ordering Party Does Not Envisage The Construction Of A Recreational Garden At The Current Stage Of Construction, Which Includes, Among Others: 2 Tables, 4 Benches, 1 Fireplace, 2 Waste Bins, 2 Bicycle Racks, Which Includes Pfu. Taking The Above Into Account, The Offered Price Should Not Include The Above-Mentioned. Costs. 4. A Detailed Description Of The Subject Of The Order Includes: Functional And Utility Program And Estimated Cost Statement/Offer Cost Estimate Constituting An Attachment To Swz.5. The Ordering Party Informs That For The Task In Question It Has A Functional And Utility Program, An Estimated Cost Statement/Offer Cost Estimate, As Well As A Decision On Determining The Location Of The Public Purpose Of April 22, 2024. 6. The Estimated Cost List Is Of An Auxiliary Nature And Is Used To Illustrate The Scale Of Construction Works, And Is Intended To Help Contractors Estimate The Costs Of The Order.7. Equivalence:1) If Terms Indicating The Type, Trademarks Or Origin Of The Subject Of The Contract Are Used In The Documentation, They Should Be Specified Together With The Words Or Equivalent. Proper Names, If Any, Are Exemplary, Define The Product Class And Serve To Establish A Standard - They Cannot Indicate A Specific Product Or Manufacturer And Do Not Constitute The Subject Of The Order. Where Possible, Equivalence Limits Should Be Defined. 2) A Description Of The Proposed Equivalent Solutions Should Be Attached To The Offer And Must Be Detailed Enough To Enable The Ordering Party, When Assessing The Offers, To Assess The Fulfillment Of The Requirements Regarding Their Functional Properties, Quality And Parameters And To Decide Whether The Proposed Solutions Are Equivalent. This Means That The Contractor Is Obliged To Demonstrate That The Solutions He Offers (E.G. Materials, Devices And Other Elements) Are Equivalent To Those Described By The Ordering Party.3) Solutions Resulting From The Use Of Equivalent Materials, Devices And Other Elements By The Contractor Are Not May Cause Any Changes In The Functional System And Technical And Operational Parameters.4) If Terms Indicating The Type, Trademarks Or Origin Of The Subject Of The Order Are Used In The Description, They Should Be Read Together With The Words Or Equivalent. Proper Names, If Any, Are Exemplary, Define The Product Class And Serve To Establish A Standard - They Do Not Indicate A Specific Product Or Manufacturer And Do Not Constitute The Subject Of The Order. When Offering An Item Equivalent To That Described In The Specification Or Bill Of Quantities, The Contractor Is Obliged To Maintain Equivalence In Terms Of Operational, Functional, Dimensional And Quality Parameters, Which Must Be At A Level Not Lower Than The Parameters Indicated By The Ordering Party. The Burden Of Proving That The Materials Offered Are Equivalent To The Requirements Specified By The Ordering Party Rests With The Contractor.