Tenders Are Invited For Superstructure, Reconstruction Of The Building Of The Sanatorium Oblęgorek Along With The Change Of Use Of The Unused Attic Into Stay Rooms And Expansion Of The Building With An Elevator Shaft

1.1 The Subject Of The Order Is The Execution Of The Task Entitled: Superstructure, Reconstruction Of The Building Of The Sanatorium Oblęgorek Along With Changing The Use Of The Unused Attic For Stay Rooms And Expansion Of The Building With An Elevator Shaft. The Task Is Co-Financed By The State Fund For The Rehabilitation Of Disabled Persons. Sanatorium Oblęgorek ” Is A Building Entered In The Register Of Monuments. 1.2. The Scope Of The Investment Includes: Demolition And Demolition Construction Works, Will Include, Among Others: - Dismantling Of Existing Floors In Rooms Subject To Reconstruction (In Accordance With The Drawing Part); - Demolition Of Parts Of Existing Partition Walls (In Accordance With The Drawing Part); - Demolition Of Balconies In The Area Planned Expansion With An Elevator Shaft With Railings; – Cutting Door Openings In The Existing External Wall Next To The Planned Elevator Shaft; – Cutting Grooves In The Walls For Mounting Steel Lintels; – Dismantling Window And Door Joinery (In Connection With The Planned Investment); – Dismantling Bathroom Fittings And Cutting Off The Wall And Floor Cladding Of Bathrooms Intended For Reconstruction; – Dismantling The Existing Roof Covering Made Of Galvanized Flat Steel Sheets Joined With A Standing Seam; – Demolition Of The Wooden, Purlin-And-Tick Roof Truss; – Protection Of The Ceiling And External Walls Of The Top Floor; – Dismantling Of The External, Forged Balustrade Of The Belvedere Along With Its Substructure And Cornice; – Dismantling Of The Roof Covering And The Structure Of The Belvedere, Inventory Of The Original Structure Elements; – Demolition Reinforced Concrete Ceiling Over The Staircase Along With The Dismantling Of The Smoke Flap; – Disassembly Of Two Flights Of Stairs With A Wooden Structure Based On Landings; – Dismantling Of Two Sectional Landings Of The Staircase, On Steel Beams; – Breaking Out Door Openings In Order To Widen The Door To The Required Width Of 90 Cm At The Ground Floor Level , 1St Floor, 2Nd Floor; – Other Demolition And Accompanying Works; – The “Oblęgorek” Sign Should Be Dismantled And Reinstalled. Preparatory Construction Works Will Include, Among Others: – Priming With Priming Preparations; – Relocation Of Internal Hydrants; – Other Preparatory Works ;Construction And Finishing Works Will Include, Among Others: – Construction Of An Elevator Shaft For Four Floors - Reinforced Concrete Structure; – Installation Of Roof Gutters And Downpipes; – Construction Of Cornices In Relation To Those Existing On The Building In Question (Wool Cornice); – Superstructure Staircase Walls To A Height Of Approx. 2.3 M, External Wall Thickness 24 Cm, Brick Walls Made Of Aerated Concrete Blocks With Thermal Mortar, 15 Cm Mineral Wool Insulation; – Construction Of A Monolithic Reinforced Concrete Ceiling, Poured Over The Staircase; – Construction Of Two Flights And Two Monolithic Poured Reinforced Concrete Landings; – Installation Of A 120X120 Cm Smoke Flap; – Strengthening Of The Existing Ceiling Above The Second Floor; – Superstructure Of Existing Chimneys; – Construction Of Hybrid Ventilation; – Delivery And Installation Of A Four-Station Elevator; – Bricking Up The Window Openings In The External Wall In Accordance With The Drawing; – Completing And Applying New Internal Cement-Lime Plasters To The Completed And Designed Walls; – Building Partition Walls (Acoustic Insulation With Mineral Wool, As Shown In The Drawing); – Bricking Up Washbasin Recesses In The Walls Internal - Leveling Of Walls; - Wall Cladding Of Hygienic And Sanitary Rooms - Tiles Up To A Height Of Min. 2.05 M In Bathrooms On The Ground Floor, 1St Floor, 2Nd Floor; – Execution Of Wall Cladding In Hygienic And Sanitary Rooms - Tiles Up To The Ceiling Height In Bathrooms On The Attic; – Execution/Addition Of Terracotta In Hygienic And Sanitary Rooms; – Insulation Of The Elevator Shaft With Wool Facade With System Plaster; – Installation Of Suspended Plasterboard Ceilings; – Painting Of Walls And Ceilings In The Building (Newly Constructed And Rebuilt Rooms); – Installation Of Bathroom Fittings With Handles For Disabled People; – Installation Of Internal Door Joinery, In Accordance With The Manufacturers Recommendations; – Works Resulting From The Modernization Of Sanitary And Electrical Installations; – Other Construction And Finishing Works; Carpentry And Construction Works Related To The Construction Of The Attic, Including: – Construction Of A New Roof Truss And Roof Layers In Accordance With The Descriptions In The Drawings; – Reconstruction Of The Belvedere Structure Based On The Inventoried Elements And Construction Of The Cladding While Maintaining The Designed Structural Layers; – Renovation (From The Interior Side) Of The Brick Dormer Wall Of The Belvedere, Plastering And Mounting The Window; – Renovation And Installation Of The Belvedere Balustrade In Accordance With The Description; – Construction Of A Dormer On The Eastern Side, Including : Bricklaying And Insulation Of The Front Wall Of The Dormer, Construction Of Side Walls In A Lightweight Structure According To The Description; – Implementation Of Roofing Made Of Flat Titanium-Zinc Sheet Metal Connected With A Standing Seam With A Structural Mat Spacer. Construction Of Roof Layers According To The Design - Construction Of Partition Walls Thick. 12 Cm And 8 Cm And Suspended Ceilings Made Of Fire Plasterboards Filled With Mineral Wool; – Construction Of Casings For Roof Structure Elements And Existing Chimneys Made Of Fire Plasterboards Up To Ei30 Resistance; – Construction Of Floor Layers And Floors Made Of Jointless Pvc Linings; – Installation Of Window Joinery For Roof Windows Wooden Sheet-Covered Windows And Classic Dormer Windows; – Installation Of Door Joinery, Including Ei 30 Resistance; – Execution And Installation, After Consultation With The Ordering Party, Of An Information Board With Dimensions Of 80X120 Cm Made Of A Composite Board, Plexiglas Or Pvc With A Minimum Thickness Of 3 Mm In Accordance With The Guidelines Set Out In The Regulation Of The Council Of Ministers Of May 7, 2021 On Determining Information Activities Undertaken By Entities Implementing Financed Tasks Undertaken By Entities Implementing Tasks Financed Or Co-Financed From The State Budget Or State Earmarked Funds (Journal Of Laws Of 2021 .Item 953),1.3. A Detailed Description Of The Subject Of The Order Is Included In The Following Documents: A) Design Documentation, Which Is An Annex To Swz No. 8, Containing: - Construction Design And Industry Designs, - Technical Specification For The Execution And Acceptance Of Works, B) Bill Of Quantities, Which Is An Annex To Swz No. 9, C) Draft Agreement Constituting An Annex To Swz No. 7, D) Supplementary Information Which Constitutes An Annex To Swz No. 10. The Bill Of Quantities Attached To The Swz Is For Information Purposes Only. After Reviewing The Design Documentation And Other Documents As Well As This Tor, The Contractor Is Obliged To Determine The Scope Of Work Necessary To Achieve The Result.