Request For Quotation Milling Cutter (High-Speed Steel), Turning Cutter, Drill Set, Screw, Hole Punch, Riveter, Rivet With Washer, Welding Wire, Soldering Acid, Electric Wire, Nozzle Sprayer B-46, Tape Clamps, Oil Filter Remover, Starter Wire, Starter Wire, Welding Electrode, Welding Holder, Welding Mask, Profile Pipe, Hot-Rolled Sheet, Tape Clamps, Aluminum Washers, Electric Gas Welders Table, Copper Washer.

Profile Pipe 60X40 (Wall Thickness Not Less Than 5.00 Mm, Length 12.0, Material Steel, Section 120*120, Color Black) Gost 32931-2015, Washer Set Of Copper (200 Pieces Copper Washer, Gasket, Nut And Bolt, Set Of Flat Ring Sealed, Packaging Durable Plastic Box With Cells. M4*8*1 -30 Pcs., M*9*1 -30 Pcs., M6*10*1 -20 Pcs, M6*12*1 -20 Pcs, M8*14*1 -20 Pcs, M8*12*1 -20 Pcs, M10*14**1 - 20 Pcs, M12*16*1 - 20 Pcs, M14 *18*1 -20 Pcs.), Aluminum Washers 500 Pcs. (Gost 11371-78, Diameter: 6 -50 Pcs, 8-50 Pcs, 10-50 Pcs; 12-50 Pcs: 13-50 Pcs, 14-50 Pcs; 15 - 50 Pcs; 16-50 Pcs; 18- 50 Pcs; 22-150 Pcs; Material Aluminum, Packaging Durable Plastic Box., Profile Pipe 40X20.2 Mm (Wall Thickness Not Less Than 5.00 Mm, Length 12.0, Material Steel, Section 110*90, Color Black) Gost 32931-2015, Impaired Welding Wire (Flat Cross-Section, Diameter 0.8 Mm, Coating Type Depleted, Material Steel, Weight 5 Kg) Gost 2246-70, Cutter (Instrumental Through-Thrust Straight 25X16) Gost 18879-73, Stainless Steel Electrode 2 Mm (For Argon Arc Welding, Tungsten Material, Diameter At Least 2 Mm, Working Current 120-200 A, Ac/Dc Welding Mode) Gost 9466-75, Lacquer Black Acid (The Color Of The Composition On The Iodometric Scale Is Not More Than 4000 Ml Gr. J2/100 Cm, The Mass Fraction Of Non-Volatile Substances Is The Norm From 47 To 51%, The Gloss Of The Coating According To The Photoelectric Gloss Meter Is Normally Not Less Than 60%. The Viscosity Of The Paint Material According To The Viscometer Is 3,246 S In Diameter Nozzle 4 Mm At A Temperature Of 20 - 05 Degrees From 4 - To 60 Warranty Period Of Storage Metal Bucket 20 Kg), Incisor (Instrumental Through-Hole Bent 25X16) Gost 18877-73, Starting Wire (Material Copper, Type - Starting Wire, Length Not Less Than 4 Meters, Wire Diameter Not Less Than 12.0 Mm, Cross-Sectional Area Not Less Than 12.00 Sq. Mm, Maximum Current - Not Less Than 3000.0 A, Number Of Wires In The Wire - 2 Pcs.), Profile Pipe 40X40. 2 Mm (Wall Thickness Not Less Than 5.00 Mm, Length 12.0, Material Steel, Section 120*120, Color Black) Gost 32931-2015, Band Clamps Made Of Mild Steel With A Diameter Of 75, 50, 30, 20, 10 (In A Set Of 5 Rings Of Different Diameters), Hot-Rolled Sheet (Thickness Not Less Than 12 Mm, From Steel Alloy Stzps) Gost 19903-2015, Starting - Charging Device (Battery Voltage – 12/24V, Mains Voltage – 220V, Minimum Battery Capacity – 30.0 Ah, Maximum Battery Capacity – 1000.0 Ah, - Minimum Starting Current – ​​350.0 A, Maximum Starting Current – 600.0 A, The Maximum Charging Current Is 100.0 A, Protected From Improper Connection And Overloads), Grinding Wheel (Size 64C 400Х40х127 16Cm) Gost 2424-83, A Set Of Taps And Dies (The Material Of The Taps Is R6m5 High-Speed Steel, The Material Of The Dies Is R6m5 High-Speed Steel, The Material Of The Drills Is R6m5 High-Speed Steel, The Number Of Items Is Not Less Than 65) Taps Gost 3266-81 Gost 9740-71 Dies, Milling Cutter (High-Speed Steel): Quantity: 10Mm (Gost 17025-71)-5Pcs, 12Mm (Gost 17026-71)-5Pcs, 14Mm (Gost 17026-71)-5Pcs, 16Mm (Gost 17026-71)-5Pcs, 18Mm ( Gost 17025-71)-5Pcs, 20Mm (Gost 2679-73)-5Pcs, 22Mm (Gost 17026-71)-5Pcs, 24Mm (Gost 17025-71)-5Pcs, 26Mm (Gost 17025-71)-5Pcs, 28Mm ( Gost 17026-71)-5Pcs, 30Mm (Gost 9140-2015)-5Pcs, 32Mm (Gost 17026-71) -5Pcs, 34Mm (Gost 17026-71)-5Pcs, 36Mm (Gost 17026-71)-5Pcs, 38Mm ( Gost 17025-71)-5Pcs, 40Mm (Gost 2679-93)-5Pcs, 42Mm (Gost 17026-71)-5Pcs, 44Mm (Gost 17026-71)-5Pcs, 46Mm (Gost 2679-93)-5Pcs, 48Mm ( Gost 2679-93)-5Pcs, 50Mm (Gost 2679-93)-5Pcs,, Cutter (Instrumental Cutting 25X16) Gost 18884-73, Cutter (Instrumental For External Thread 25X16) Gost 18885-73, Spray Nozzle B-46 (Spray Nozzle Size 8*03*140 Engine Brand B46 D6, D12 Engine Diesel Type Mechanical Nozzle (Set Of 12 Pieces))