Tenders Are Invited For State Procurement By Means Of A Competition For The Purchase Of Paints For Airfields Of The Armed Forces Of The Republic Of Kazakhstan For 2024

Black Paint Is Intended For Painting Various Surfaces Made Of Aluminum And Its Alloys, As Well As Steel Surfaces. The Main Requirements For The Product (Equipment). Must Refer To Enamels With Special Properties. Products Covered With Enamel Are Used In Atmospheric Conditions Of Various Climatic Zones. The Resulting Coating Should Be Elastic And Have Good Hardness, Should Be Applied With The Initial Viscosity And Dry Fairly Quickly In Natural Conditions. ,5) С0 14-20, Mass Fraction Of Non-Volatile Substances, %34-40, Drying Time To Degree 3 At A Temperature Of (20+2) С0, H, No More Than 2, Hardness Of The Film According To The Pendulum Device: M-3, According To Unit, Not Less Than 0.4, Tml, Pendulum A, Rel. Unit, Not Less Than 0.2, Elasticity Of The Film When Bending, Mm, Not More Than 1, Coverage Of The Dried Film, G/M2, Not More Than 180, Consumption For A Single-Layer Coating Is, G/M2 60-90, Thickness Of A Single-Layer Coating, Μm 15-25. Other Functional And Quality Requirements For The Product (Equipment, Works, Services): The Supplied Paint Must Be Packaged In Metal Buckets With A Capacity Of No More Than 30 Kg. The Production Period Is Not Earlier Than 2024., Red Paint Is Intended For Painting Various Surfaces Made Of Aluminum And Its Alloys, As Well As Steel Surfaces. Basic Requirements For The Product (Equipment). Must Refer To Enamels With Special Properties. Products Covered With Enamel Are Used In Atmospheric Conditions Of Various Climatic Zones. The Resulting Coating Should Be Elastic And Have Good Hardness, Should Be Applied With The Initial Viscosity And Dry Fairly Quickly In Natural Conditions. ,5) С0 14-20, Mass Fraction Of Non-Volatile Substances, %34-40, Drying Time To Degree 3 At A Temperature Of (20+2) С0, H, No More Than 2, Hardness Of The Film According To The Pendulum Device: M-3, According To Unit, Not Less Than 0.4, Tml, Pendulum A, Rel. Unit, Not Less Than 0.2, Elasticity Of The Film When Bending, Mm, Not More Than 1, Coverage Of The Dried Film, G/M2, Not More Than 180, Consumption For A Single-Layer Coating Is, G/M2 60-90, Thickness Of A Single-Layer Coating, Μm 15-25. Other Functional And Quality Requirements For The Product (Equipment, Works, Services): The Supplied Paint Must Be Packaged In Metal Buckets With A Capacity Of No More Than 30 Kg. The Production Period Is Not Earlier Than 2024., Paint - Yellow (Based On Acrylates, Reflective) Is Intended For Marking (Marking) On ​​Artificial Surfaces Of Runways Of Airfields. Brightness Coefficient (Whiteness) Of The Dried Film, % - Not Less Than 70%; Density, G/Cm.Cubic. - 1.2 G/Cm.Cubic. – 1.6 G/Cm.Cub.; Mass Fraction Of Non-Volatile Substances, % - Not Less Than 70%; Grinding Degree, Μm - No More Than 70 Μm; Adhesion To The Concrete Surface, N - Not Less Than 20 N; Resistance Of The Coating To The Action Of 3% Nacl Solution At A Temperature Of 20±2 Celsius, Time - Not Less Than 24 Hours; The Paint Is Additionally Supplied With Light-Reflecting Microglass Beads Of Fraction 100-600 Microns, Taking Into Account The Consumption - 250 Grams Per 1 Kilogram Of Supplied Paint.