Request For Quotation Installation Of A Circulation Pump

Installation Of A Circulation Pump — Three Speeds. — Ceramic Radial Bearings. — Graphite Axial Bearing. — The Rotor Sleeve, Gap Seal And Bearing Collar Are Made Of Stainless Steel. — The Stator Body Is Made Of Aluminum Alloy. — The Pump Body Is Made Of Cast Iron. — Stator With A Built-In Temperature Sensor. 1-Phase Electric Motor. The Pump Is Supplied With A Standard Relay Module In A Terminal Box. The Standard Module Is Connected To The Power Grid Through An External Contactor. Technical Characteristics: The Number Of Speeds Is 3 The Maximum Hydrostatic Pressure Is 120 Dm Data On The Nameplate — Ce, Tse Materials: Pump Body — Cast Iron, En-Jl1040, Astm 35 B — 40 B Impeller: Stainless Steel, 1.4301 Din W.-Nr. , 304 Aisi Assembling: The Ambient Temperature Range Is 0 .. 40 °C Max. Working Pressure — 10 Bar The Standard Flange Is Din Pipe Connection — Dn 40 The Permissible Pressure Is Pn 6 / Pn 10 Installation Length — 250 Mm Liquid: The Liquid Temperature Range Is -10 .. 120 °C Electrical Equipment Data: Supply Power At Speed 1 — 440 W The Supplied Power At Speed 2 — 460 W The Supplied Power At Speed 3 — 470 W Industrial Frequency — 50 Hz Nominal Voltage — 1 X 230-240 V Current At A Rotation Frequency Of 1 — 2.2 A Current At A Rotation Frequency Of 2 — 2.3 A Current At Speed 3 2.2 A Cos Phi For Speed 1: 0.87 Cos Phi For Speed 2: 0.87 Cos Phi: 0.93 Capacitor Size - Operation - 12 Μf/400 V Protection Class (Iec 34-5) — X4d Insulation Class (Iec 85) — H Electric Motor Protection — Contact Thermal Protection Is External Control Devices: Relay — No Relay The Position Of The Terminal Box Is 1.30H Second: Net Weight — 19.1 Kg Full Weight — 19.6 Kg The Volume Of The Package Is 0.026 M3