Request For Quotation Medical Products

Sterile Polymer Containers For Magnetic Contrast Material Ssqk65/115Vs, Stent-Graft System (Bifurcation Component) For Aneurysm Of The Abdominal (Abdominal) Aorta - Sterile Non-Absorbable Tubular Device, Usually Implanted At The Junction Of The Abdominal Aorta And Common Iliac Arteries To Reduce Pressure On The Aneurysm Of The Abdominal Aorta. It Is Introduced Percutaneously Through The Femoral Artery To The Implantation Site Using A Disposable Delivery Device, After Which It Expands Independently. It Is Usually Made Of A Nickel-Titanium Alloy (Nitinol), Which Forms An External Mesh Structure With An Internal Polymer Tube (Endovascular Graft). As A Rule, The Product Is Available In Two Versions: 1) Single Continuous Tube For Introduction Into One Iliac Artery; Or 2) Bifurcation Design From Two Parts (For Example, A Tube In The Shape Of The Letter Y) For Introduction Through Both Iliac Arteries, Optional Filter Made Of Stainless Steel 316 Lvm: With The Possibility Of Both Permanent And Temporary Implantation (No Time Limit For Removal), Conical Shape With Two Different Levels. The Upper (Fixing) Level Consisting Of Six Short Legs, With Distal Ends In The Form Hooks That Provide Active Fixation And The Lower (Centering) Level Consisting Of Three Long Legs, Two Of Them With Atraumatic Ends For Blood Vessels, And The Third Has A Loop At The End That Allows The Filter To Be Pushed Through Femoral And Popliteal Access. Legs Of Different Lengths For Prevention Their Crossing. Non-Magnetic, Conditionally Compatible With Mri. Absence Of Adhesions When Connecting The Legs. Resistant To Corrosion. The Height Of The Vein-Cava Filter Is Less Than 1 Gram 0.3 Mm. The Filter Is Suitable For A Vena Cava With A Diameter Of Up To 32 Mm. Installation Is Possible With 4 Accesses: Jugular, Brachial, And Poplar. It Is Supplied In An Expanded Form In A Flask With A Luer Lock System To Avoid The Filter Not Opening During The Procedure. Color Marking For Different Types Of Access. The Kit Includes A 7F Introducer Catheter With A Radiopaque Label, A Dilator, A Delivery Catheter, A 17G Puncture Needle And A .035”, 9F, 150/180Cm J-Shaped Guide. Documents Provided By The Supplier: - A Copy Of The Registration Certificate Or A Letter From An Authorized Body Stating That This Set Is Not Subject To Registration In The Republic Of Kazakhstan; - Passport/Certificate Of Origin From The Manufacturer; The Product Must Be Marked In Accordance With The Legislation Of The Republic Of Kazakhstan., The Proximal End Of The Configuration Of The Contralateral Branch Opens In The Short Contralateral Branch Of The Bifurcation Configuration, And The Distal End Opens In The Contralateral Iliac Artery. The Proximal End Of The Configuration Of The Contralateral Branch Has The Configuration Of An Open Crown, Which Does Not Contain Graft Material In Its Recesses., Contralateral Component: X-Ray Contrast Markers In The Proximal Part Easily Visualized Under A Radioscope. X-Ray Contrast Markers In The Distal Part Easily Visualized Under A X-Ray Scope. The Material Of The Stent Is Nitinol. The Coating Material Is A Two-Layer E-Ptfe Membrane - Prevents The Development Of Leaks (Endoliks) In The Aneurysm Cavity; Stretched Polytetrafluoroethylene , Located In 2 Layers Crosswise, Prevents The Stent-Graft Material From Spreading. Characteristics: Proximal Diameter (D1) (Mm): 12,14,16. Distal Diameter (D2) (Mm): 10,12,14,16,18, 20,22.The Overall Length Of The Closed Part (L1) (Mm): 40,60,80,100,120.Diameter Of The Delivery System - 18 Fr. Registration In The Republic Of Kazakhstan; - Passport/Certificate Of Origin From The Manufacturer; The Product Must Be Marked In Accordance With The Legislation Of The Republic Of Kazakhstan., The Proximal End Of The Bifurcation Configuration Of The Stent-Graft Is Revealed In The Proximal Neck And Upper Part Of The Aneurysm. The Proximal End Of The Bifurcation Configuration Consists Of Nitinol Stents Sewn To The Woven Graft. The Suprarenal Part Of The Proximal End Is Not Covered With A Tissue Graft. The Suprarenal Stent Also Has Fixing Pins For Fixing The Stent-Graft In The Aorta. Distally, The Aortic Part Bifurcates Into 2 Smaller Tubes: The Ipsilateral Iliac Branch And The Short Contralateral Branch. Stents Of The Ipsilateral Branch Are Sewn To The Outer Surface Of The Woven Material, Forming A Smooth Inner Cavity. Stents Of The Contralateral Branch Are Sewn To The Inner Surface Of The Woven Graft.