Quotation Are Invited For Replacement Of Pole Lights

Quotation are invited for Replacement of Pole Lights. REPLACEMENT OF POLE LIGHTS IN NAJM# 400KV SUBSTATIONSCOPE OF WORK:CONTRACTOR SHALL CARRY OUT THE LIGHTING AND SMALL POWER (LSP) WORK S TORECTIFY THE DEFECTS OF OUTDOOR POLE LIGHTING SYSTEM AT NAJM 400KVSUBSTATION. REPLACEMENT OF DEFECTIVE/OLD MATERIALS WITH NEW SUP PLY OFALL NECESSARY MATERIALS, INSTALLATION, TESTING AND COMMISSIONING OF THEOUTDOOR LIGHTING SYSTEM ARE UNDER THE SCOPE OF THE CONT RACTOR. THEDETAILED SCOPE OF WORKS ARE AS FOLLOWS:1.#SUPPLY & INSTALLATION OF 63 NOS. OF NEW POLE LIGHTS / FLOOD LIGHTSAT SUBSTATION EXTERNAL AREA. REPLACE THE DEFECTIVE LIGHT FITTINGS OF250W SODIUM VAPOR LAMPS IN THE OUTDOOR LIGHTING POLES WITH NEW LED LIGHTFITTI NGS TO GIVE EQUIVALENT OR BETTER ILLUMINATION LEVELS. CONTRACTORSHALL SELECT SUCH LIGHT FITTINGS AND ENSURE THAT NEW LIGHT FITTINGS ARECOMPATIBLE FOR MOUNTING ON THE EXISTING LIGHTING POLES IN THE SUBSTATIONPREMISES. CONTRACTOR SHALL REPLACE THE OLD CABLING WITHIN THE LIGHTINGPOLES WITH GOOD QUALITY STANDARD CABLES OF SUITABLE SIZE AND RATING FORTHE APPLICATION (IF REQUIRED AND AS PER SITE INS PECTION). CONTRACTORSHALL REPLACE THE EXISTING POWER CONNECTORS AT LOW LEVEL OF LIGHTINGPOLES, IF INSTRUCTED TO DO SO BY THE DEWA SU PERVISION STAFF AS PER SITECONDITION.2.#THE CONTRACTOR SHALL SHIFT AND SCRAP THE REMOVED LIGHTS AND DEFECTEDMATERIALS TO DEWA CENTRA L SCRAP YARD.3.#THE CONTRACTOR SHALL DO ALL NECESSARY MODIFICATION, CABLING ANDWIRING AND IN THE CORRESPONDING LSP SYSTEM DB AT THE SECURITY ROOM TOACHIEVE THIS REQUIREMENT. CONTRACTOR SHALL CONNECT THESE NEW LIGHTFITTINGS WITH AUTO- LIGHTING ARRANGEMENT SO THAT T HESE LIGHTS SHALL BESWITCHED ON AND OFF AUTOMATICALLY THROUGH A CIRCUIT OF PHOTOCELL SENSORAND/OR 0-24 HOUR TIMER CIRCUIT WITH ADJUS TABLE SETTING AND CONTACTOR INSECURITY ROOM DB AS PER THE INSTRUCTION OF TCM SUPERVISION TEAM.4.#VENDOR SHALL SUBMIT THE PROPOSED DR AWING (HIGHLIGHTING THE NEWINSTALLATIONS, REMOVAL OF POLES AND CABLE ROUTE) PRIOR TO WORK START FORAPPROVAL.5.#LAMPS/ ACCESSORIES DA MAGED SHALL BE REPLACED BY THE CONTRACTOR.6.#CONTRACTOR SHALL PROVIDE AND ENSURE PROPER EARTHING AS PART OF THEINSTALLATION.7.#ALL N ECESSARY IDENTIFICATION, LABELLING AND FERRULING SHALL BE DONEAS PER THE INSTRUCTION OF DEWA SUPERVISION TEAM.8. Qty: 63 STANDARD TERMS & CONDITIONS 1) Prices should be DDP delivery duty paid at DEWA stores. 2) Quotation to be submitted only in local currency U.A.E Dirhams 3) DEWA Standard payment terms is 30 days credit from the date of acceptance of material 4) No DEWA staff or his or her relatives up to third degree should have ownership or partnership in your company, and your participation in DEWA tenders / RFQs should not constitute a Conflict or perceived Conflict of Interest. Supplier Registration: https://srm.dewa.gov.ae/irj/portal/anonymous/regis Tender Link : https://srm.dewa.gov.ae/sap/opu/odata/sap/ZSRM_RFX_REG_BID_SRV/AttachmentSet(2332401312)/$value