Tenders Are Invited For Gas Through-Flow Heater 2 Pieces As Well As Temperature Controllers

Product To Be Purchased: Gas Through-Flow Heater 2 Pcs And Temperature Controls - As Gases: Air Or Carbon Dioxide, Or A Mixture Of These And Water Vapor. Or Flue Gas. The Gas Is Particle-Free.- Heater Power Source: Electricity- Number Of Heaters 2 Pcs- Powers Approx. 30 Kw And 20 Kw Suitable Temperature Controls For The Above Heaters. Technical Requirements:. Kw And Heater 2: About 20 Kw- Temperature Duration Of The Gas Entering The Heaters At Least 160 ºc- Temperature Of The Gas Leaving The Heater At Least 1100 ºc- Pressure Resistance Of The Heater At Least 0.5 Bar(G)- The Heater Must Be Gas-Tight- Gas Flow Rates In The Heater Heater 1: About 16 – 162 Kg/H, Heater 2: Approx. 10 – 108 Kg/H- Pressure Difference Across The Heater, Heater 1: Approx. 8 Kpa, Heater 2: Approx. 13 Kpa - Heaters Must Withstand Continuous Use, E.G. For A Week Straight.- Heaters Must Have Thermocouples Inside For Temperature Control And Overheating Protection.- The Heater Must Be Ce-Marked- The Heater Must Comply With Ped (Ce) Regulations In The Necessary Parts- The Heater Must Be Connectable On Both Its Inlet And Outlet Sides Either By Welding Or With Suitable Flange Or Other Types Of Connections.- The Heaters Are Supplied With Necessary Documentation.Temperature Controller- A Device Intended For Power And Temperature Regulation Of Heaters- Power Supply 400 Vac, 3L + N + Pe- The Controller Must Be Able To Control The Power Of The Heater So That The Heater Produces Flow-Through Gas Of The Desired Temperature.- The Controller Has A Temperature Controller Where The Desired Temperature Is Set For The Heater. - The Controller Reports The Measured Process Temperature And Excess Temperature - The Controller Can Be Given A Set Value From An External Automation System - The Controller Values ​​Can Be Output To The External Automation System - A Flow Monitor Message Can Be Connected To The Controller, Which Gives Permission For Heating The Heater Or Turns It Off. The Flow Monitor Sensors Are Included In The Delivery.- The Regulator Is Designed To Work With Heaters.- The Regulators Must Be Ce Marked- The Necessary Documentation Is Supplied With The Regulators