Tenders Are Invited For Construction Of A Village Community Center In Józefowo - Stage Ii.

1) The Subject Of The Order Is To Select A Contractor For Construction Works Related To The Construction Of A Village Community Center Building In Józefów - Stage Ii. 2) The Scope Of The Investment Project Includes At Least: A) Above Ground Walls, Partition Walls. - Arranging Prefabricated Lintels In Openings In Brick Walls; - Slopes Under Sheet Metal Flashings Made Of Cement Mortar;- Windowsills And Shelves Up To 30 Cm Wide Made Of Stone Conglomerate Boards On Polyester Base B) Substrates And Floors.- Insulation Made Of Cold-Glued Foils Inside The Rooms - Thick. 2 Mm Foil; - Horizontal Thermal And Anti-Sound Insulation Made Of Polystyrene Boards. 15 Cm. Dry On Top Of The Structure - One Layer Of Hard Styrofoam. 15 Cm;- Horizontal Thermal And Anti-Sound Insulation Made Of Polystyrene Boards. 15 Cm. Dry On Top Of The Structure - One Layer Of Hard Styrofoam. 20 Cm.;- Insulation Made Of Cold-Glued Foils Inside The Rooms - Thick. 2 Mm Foil; - Leveling Layers For Cement Mortar Floors, Thick. 60Mm. Sharply Blurred;- Surcharge For Reinforcement Of Cement Floors With Steel Mesh;- Single-Color Floors Made Of Stoneware Tiles, Placed In Rooms With An Area Of ​​Over 10 M2 On An Adhesive Mortar;- Tile Plinths Made Of Artificial Stones Laid With Glue - With Tile Cutting;- Plinths On Stairs Made Of Artificial Stone Tiles Laid On Glue. C) Internal Plasters − Ordinary Category Iii Plasters Made By Hand On Ceilings And Joists; − Ordinary Category Iii Plasters Made By Hand On Walls And Columns; − Ordinary Category Ii Plasters On 20 Cm Wide Jambs; − Single-Layer Internal Plasters (Finishes) Made Of Thick Gypsum Putty. 3Mm. Made Manually On Walls With A Plaster Base; − Single-Layer Internal Plasters (Finishes) Made Of Gypsum Putty, Thick. 3 Mm, Made Manually On Plastered Ceilings. D) Painting Works, Cladding − Priming Horizontal Surfaces With The Preparation; − Priming Vertical Substrates With Primers; − Facing Walls With Artificial Stone Tiles On Adhesive Mortar; − Painting Internal Surfaces With Emulsion Paints.3) The Detailed Scope Of The Subject Of The Order Is Specified In The Design Documentation, Technical Specifications For The Execution And Acceptance Of Works, Bills Of Quantities And In The Draft Contract. Due To The Limited Value Of The Field, Which Cannot Be Longer Than 4,000 Characters, The Ordering Party Informs That The Remaining Information In The Description Of The Subject Of The Order Is Specified In Chapter V Of The Terms Of Procurement.