Tenders Are Invited For Motor Vehicles – Delivery Of 2 Thermal Semi-Trailers

Motor Vehicles – Delivery Of 2 Thermal Semi-Trailers. Permissible Total Mass Of The Trailer Max. 29,500 Kg; Axle Load On All Axles Max. 9,000 Kg; Total Length Approx. 7,200 Mm; Total Width Max. 2,550 Mm; Fifth Wheel Height Approx. 1,150 Mm; Frame Neck Height Approx. 150 Mm; Steel Saddle Plate, Screwed To Frame; 2 Inch Kingpin (Replaceable); Underrun Protection And Side Protection Device In Accordance With Ec Regulations; Supporting The Parked Trailer Using Mechanical Winches, 20 Ton Version With 2 Speeds; Plastic Half-Shell Fenders With Mud Flaps On All Axles; Container Holders: Container Lock For 20 Ft, Rear-Flush Design, For Containers In Accordance With Iso 668 And Iso 1496-3; Painted Frame And Winches; Air Suspension On All Axles; Lifting And Lowering Device For Air Suspension With Operation On The Side Of The Body At The Front Left (Control Unit); Compressed Air Brake System With Ebs According To The Latest Standards; Disc Brakes On All Axles; 2 Interchangeable Coupling Heads At The Front; Duo-Matic Clutch Additionally; Axle Load Detection Via Ebs-Can Bus Signal; Tires 385/65 R22.5 160 J Or Higher, With Winter Tire Approval (Alpine Symbol Must Be Present On The Tire Sidewall); Voltage 24V; Two 7-Pin Plugs To The Tractor; Lighting System Completely In Led Design; Reversing Warning Device, In A Noisy Version, Self-Adjusting 77-97 Decibels; 2 Additional Led Work Lights In The Rear Area, Switched Via An Additional Switch; 3-Pin Socket At The Rear, Voltage Is Permanently Present While Driving; Permanently Installed 230V Charger For Charging The Batteries To Be Installed. The Charging Speed For Charging The Batteries To 90% Must Be < 8H. The 230V Cee Socket For This Must Be Easily Accessible At The Rear; 2 Steel Wheel Chocks Including Bracket; Contour Marking, White On The Sides, Yellow On The Back In Accordance With Ece Regulation 48; All Standards Applicable Upon Delivery For The Construction, Operation And Safety Of The Heat Storage Device Must Be Met; Critical Operating Conditions Must Be Avoided By Installing Safety Devices. An Appropriate Security Concept Must Be Demonstrated; The Storage Device Must Be Certified In Terms Of Operational Stability By An Authorized Technical Testing Institution; The Declaration Of Conformity Must Be Enclosed; Heat Storage Capacity Of 2.1 To 3.0 Mwh; All Container Parts And Installations (E.G. Inner Wall Of The Container, Heat Exchanger, Connections, Etc.) That Come Into Contact With The Storage Medium And The Loading Water Must Be Made Of Rust-Proof, Corrosion-Resistant Materials. It Must Be Ensured That All Heat-Conducting Materials Are Permanently Resistant To Deionized Water; Dimensions: Total Height Of The Container Including Chassis Max. 3,900 Mm, Length Of The Container Max. 7,000 Mm, Accommodation For A 20 Ft. Container, According To Point 2.10, Swap Body Fastening Screwed; Area Of ​​Use: Design Temperature Of The Water 0° To Approx. 9