Request For Quotation Purchase Of Womens And Mens Shoes

Womens Shoes Consist Of The Following Parts: A Jerk, A Column And An Ankle Strap. The Shoes Are Bulletproof Vests For Female Military Personnel. The Outer Details Of The Sole Of The Shoe Are Quilted Leather, The Main Lining And Removable Insole Are Black Leather. Inside Guest. The Height Of The Inner Seat In The Front Parts From The Upper Edge To The Bent Edge - 40 Mm. The Height Of The Outer Seat Is 35 Mm. The Width Of The Back Is 60 Mm Shoe Lining. Technical Conditions Gost 940 Leather Underlay. Removable Insole - Internal Details Of The Tone Of The Shoe In Shape Correspond To The Main Insole. The Main Insole Is Leather Under The Shoe. Technical Conditions Ensures The Waterproofness, Strength And Wear Resistance Of The Sole Of The Shoe In Accordance With Gost 29277-22. The Main Insole Is Repeated And Partially Formed By The Insole With A Metal Instep Insert. 1. A Pair Of Shoes Must Be Mutually Symmetrical. 2. All Parts Of The Shoe Must Be Cut From Leather With The Same Patterned Relief And Not Have Variegation And Variegation. 3. The Shoe Has The Following Production Defects: - Torn Lining And Folds Inside The Shoe; - Does Not Stick To The Lining; - Embossed Fixing Sole And Insole; - Protruding Fasteners On The Sole Or Insole; - The Sole Is Not Glued; - The Gap Between The Details Of The Sole Of The Shoe; - Changing The Shape Of The Belly Of The Foot; - Poor Posture Of Shoes In The Heel Part (Folds, Folds); - Contamination Of Shoes; - Penetrating Damage To Shoe Parts. 4. Shoes In A Pair Must Be The Same In Size, Fullness, Texture And Color Of Materials, Well Formed, Processed, Without Stains, Folds And Folds., Mens Boots Insulated From Black Genuine Leather. Boots Insulated Boots With A Short Toe For Military Personnel. The Instep Is Solid Symmetrical, With A Neck, Not Stretched. The Length Of The Neck Is 60 Mm, The Width Is 50 Mm. The Wing Of The Jerk Is Elongated, Rounded In Shape, From The Outer Side To The Middle Of The Tentacle. The Outer Fit Is Solid, The Width Along The Upper Edge Is 145 Mm, The Height In The Center Is 145 Mm, Along The Middle Seam 140 Mm. The Internal Landing Module Consists Of Two Parts: Rear And Front. The Width Of The Front Inner Seat Is 65 Mm, Including The Zipper Along The Upper Edge. The Width Of The Rear Inner Seat Is 80 Mm, Including The Zipper On The Upper Edge. The Height Of The Seat From The Back Belt To The Sole Is 14 Cm. Height 30-35Mm, Excluding Heel-Plantar Edge. The Sole And Heel Are Wear-Resistant, Non-Slip, And Frost-Resistant. Quality Requirements For Shoe Production: 1. A Pair Of Shoes Must Be Mutually Symmetrical. 2. All Shoe Details Must Be Cut From Leather With The Same Patterned Relief And Not Have Colors Or Different Shades. 3. The Shoe Has The Following Production Defects: - Torn Lining And Folds Inside The Shoe; - Does Not Stick To The Lining; - Embossed Fixing Sole And Insole; - Protruding Fasteners On The Sole Or Insole; - Poor Posture Of Shoes On The Heel Part (Folds, Unevenness); - Dirty Shoes; - Penetration Of Shoe Parts And Damage Are Not Allowed. 4. Shoes In A Pair Must Be Identical In Size, Fullness, Texture And Color Of Materials, Well Formed, Processed, Without Stains, Folds And Folds. 5. Machine Seams Must Be Flawless, The Seam Did Not Deviate From The Edge Of The Part And Two Parallel Seams Did Not Intersect. 6. Shoes With A Short Toe Should Provide Freedom Of Movement And Comfort Of Wear, Do Not Shrink When Walking, Easy To Put On And Take Off. 7. The Sole Must Be Characterized By High Wear Resistance, Resistance To Water And Change In Shape.-, Warm Boots Made Of Natural Smooth Leather Lined With Natural Wool Are Intended For Winter Wear. The Details Of The Upper Of The Boot: An Expressive Jerk, A Part Sewn Into A Jerk, A Knee Part, A Buckle That Acts As A Belt Amplifier, 1-Buckle, 2-Buckle, 1-Bracket, 2-Bracket, Upper Tongue, Lower Tongue, Protrusion In The Form Of The Letter T, Acting As A Hook, Soft Edge. An Expressive Setting For A Jerk (Jerk): The Upper Part Of The Pulley, Consisting Of A Semicircular Segment, Is Sewn To A Part Of The Beak Knot. The Heel Knot Of The Guest, Which Performs The Role Of A Reinforcing Belt, Is Sewn To A Soft Edge 2 Cm Wide At The Back And 7.5 Cm On The Side Parts. A Decorative Seam Is Made Along The Soft Edge. The Connection Of The Upper Part With The Lining Of The Back Knot And The Front Part Of The Saddle, As Well As With The Upper Tongue, Is Carried Out With Sharpening. To Reduce The Shrinkage Of The Shoe, The Remaining Visible Edges Of The Parts Are Cut Off, And Then Painted In The Color Of The Top. 10 Mm Thick Foam Is Applied To The Soft Edge 3-4.5 Cm Wide And The Upper Tongue 4 Cm Wide, Which Provides Additional Comfort During Work. A Layer Of Nitrocellulose And Mineral Filler (Granitol) Is Applied To The Toe And Heel Of The Shoe On A Rosin Mixture That Preserves The Shape Of The Shoe , Preventing Damage To The Toes. The Boots Are Equipped With A Removable Insole According To The Size Of The Shoe. The Lower Layer Of The Removable Insole Is Made Of Lining Foil, Natural Felt, The Intermediate Layer Is Made Of Natural Felt, The Upper Layer Is Made Of Natural Fur, The Thickness Of The Sole Is 1 Cm. The Layers Of The Removable Insole Are Fixed With A Thread Seam. Insole 3±0.5 Mm To Hold The Arch Of The Foot. Made Of Genuine Leather (Main Insole) And 2.0 Mm Thick Cardboard (Hard Floor Insole). A Black Plastisol Label Measuring 35X8 Mm (Dhsh) With The Inscription Polisia (Arial Font Format, White Color) Is Sewn On The Outside Of The Shoe., Black Boots Made Of Natural Smooth Leather And High-Strength Textile With Water-Repellent Inserts. The Height Of The Seat Is 20±2 Cm, 2 Zones Pass Through The Grommets. Plug The Lining Of The Boots Is Presented In The Form Of Breathable Textile With High Resistance To Abrasion. Shock-Absorbing Polyurethane Insole. The Sole Is Made Of Oil-Resistant, Non-Porous Oil Rubber That Withstands Punctures And Wear. The Boots Have A Hermetic Combined Pad That Prevents Small Debris And Dirt From Getting Inside, And The Shock-Absorbing Pad Of The Correspondent Prevents Pinching And Injury When Lifting. With A Seam And A Soft Edge With A Width Of 2 To 4 Cm. 1-Guest. The Height In The Front Part, The Height Of The Connection Under The Pulley Is 90 Mm, Sharpened + 10 Mm. The Width From The Flap In The Upper Part To The Guest 2 - 55Mm + 10Mm. The Width In The Lower Part From The Joint To The 2 Landings Is 45 Mm, Blade + 10 Mm. The Width Between The Decorative Rows Is 20 Mm. 2 Guests. 1-Height From The Side Of The Rack To The Connection From The Side Of The Rack - 90 Mm + 10 Mm And On The Pull + 18-20 Mm. The Height Of The Back From The Back To The Sole Is 70Mm + 10Mm And On The Pull + 18-20Mm. The Width In The Upper Part Is 20 Mm + 10 Mm. Width In The Lower Part - 50 Mm + 10 Mm. For The Outer And Inner Parts Of The Upper Part Of The Shoe Leather For The Upper Part Of The Shoe Of Military Personnel. Chromium-Tanned Leather Of Black Color. For The Lower Part Of The Shoe Leather For The Lower Part Of The Shoe. Technical Specifications Gost 29277-92. For Fixing Parts Cotton And Synthetic Shoe Thread. Technical Specifications Gost 30226-93. The Threads Are Particularly Strong., Black Chrome Mens Boots With A Short Toe And Hidden Side Elastics. Boots Boots Are Assembled With A Short Fit For Military Personnel. The Outer Side Consists Of A One-Piece Gusset, Saddle, Rear Outer Tape. Two Seams Are Made Along The Joined Edges Of The Parts. The Seams Are High-Quality, Durable, Have A Small Stiffness And Must Wear The Shoes Until They Are Completely Worn. The Rubber Must Withstand The Outer And Inner Parts Of The Shoe Are Made Of Leather. The Upper Layer Is Made Of Leather In The Center From The Upper Edge To The Elastic Edge -200 Mm + 4 Mm For The Bend, The Width In The Upper Part Of The Joint From The Inner To The Outer - 75 Mm, The Height From The Upper Edge Of The Joint To The Bend, 60 Mm From The Bend To The Elongated Edge - 55 Mm + 18-20 Mm. The Wing Of The Bract Is Extended To The Middle Of The Bract. Turn. The Width Of The Seat From The Rear Outer Belt To The Connector Is -160 Mm, + 10 Mm. 3. The Rear Outer Belt (Asb). The Height From The Upper Edge To The Elongated Edge Without Connection To The Coil Is 70 Mm, Connection To The Coil + 5 Mm + 15-16 Mm. The Width Of The Asb Is 20-30 Mm. 4. Shoe Rubber. The Height Of The Rubber Is 60 Mm, The Width Is 4 Mm. Requirements For Basic Materials - For External And Internal Parts Of Footwear Gost 28422-89 Leather For The Upper Part Of Footwear Of Military Personnel. Technical Specificationsfor Main Linings And Additional Insoles Gost 29277-92 Leather For The Bottom Of Shoes. Technical Specifications Gost 30226-93 Cotton And Synthetic Shoe Threads For Attaching Parts. Technical Conditions, Black Summer Lace-Up Shoes Sports Shoes. The Upper Guest Jack, Bounded On 4 Sides By The Edges Of The Pulley, The Reinforcing Belt And The Lower Guest, Is Made In The Form Of A Rectangle Of 40*45 Mm From Wear-Resistant, Breathable, Waterproof, Nylon Textile Material, The Edge Of Which Has A Smooth Rounded Line Bounded By The Lower Guest. The Heel Knot Consists Of A Column, A Soft Edge Going To The Upper Part Of The Saddle, A Reinforcing Belt And A Lower Saddle. The Soft Edge Is Made Of Soft, Wear-Resistant, Breathable, Waterproof Nylon Textile Material. The Reinforcing Belt Is Trapezoidal, 10 Wide -12 Mm In The Upper Part, Intersecting With The Lower Part Of The Pulley, In The Lower Part, Adjacent To The Upper Edge Of The Lower Part, 18-20 Mm Wide 20 Mm+-1 Mm Insole. Removable Insole, Ethylene Vinyl Acetate (Eva) Base Material, Polyester Fabric With Pile. 10. Sole. The Method Of Attaching The Sole Is Glue. The Sole Is Light, Durable, Wear-Resistant Made Of Polyurethane. 11. The Connection Of The Leather Lining Is Connected To The Seat Of The Leather Lining With A Zigzag Seam, The Lining Part Of The Leather Lining Is Regulated By A Single-Row Seam. 12. The Lining Is Cut From Cattle Leather With A Thickness Of 0.1-1.1 Mm. The Color Of The Lining Is Black. Metal Anti-Corrosion Pulleys, 20 Pieces Per Pair. Durable Synthetic Cords 2.0-4.5 Mm Wide With Plastic Heat-Treated Ends. Black Plastisol Measuring 35X8 Mm (Dhsh) With The Inscription Polisia (Arial Font Format, White Color) Is Sewn On The Outside Of The Shoe., Womens Warm Short Black Ankle Boots Made Of Genuine Leather. The Lining And Removable Insole Are Made Of Natural Thick Black Leather With A Pile Height Of 10.0-12.0 Mm. The Material Of The Upper Is Leather, Folded In An Overlap. Leather Over Military Shoes. Waterproof, Elastic, Lining - Split Sheepskin. Removable Insole Shoe Cardboard And Shoe Details From It. The Main Insole Is The Inner Part Of The Bottom Of The Shoe Leather For The Bottom Of The Shoe. It Is Made Of Durable Leather According To Gost 29277-92, Provides High Waterproofness, Durability And Wear Resistance. Resistant To Abrasion, Temperature Fluctuations. The Method Of Gluing With Glue Ensures High Strength And Wear Resistance. 1. A Pair Of Shoes Must Be Mutually Symmetrical. 2. All Shoe Details Must Be Cut From Leather With The Same Patterned Relief And Not Have Variegation And Variegation. 3. The Shoe Has The Following Production Defects: - Torn Lining And Folds Inside The Shoe; - Not Glued Behind The Lining; - Embossed Fixing Sole And Insole; - Protruding Fasteners On The Sole Or Insole; - The Sole Is Not Glued; - Poor Posture Of Shoes On The Heel Part (Creases, Folds); - Soiled Shoes; 4. Shoes In A Pair Must Be Identical In Size, Fullness, Texture And Color Of Materials. There Should Be No Breaks In Lining Parts In The Flattened Seam. 5. Machine Seams Should Be Flawless, The Seam Should Not Deviate From The Edge Of The Part And Two Parallel Seams Should Not Intersect. 6. Shoes Must Ensure Freedom Of Movement And Comfort Of Wear, Do Not Shrink When Walking, Easy To Put On And Take Off. It Is Not Allowed To Peel Off The Glue Of The Sole, Runoff Of Dyes. 7. The Sole Must Be Characterized By High Wear Resistance, Resistance To Water And Change In Shape., Boots Insulated With A Long Toe For Wearing In The Winter Period, Made Of Smooth Genuine Leather On A Lining Made Of Natural Fur, With A Semi-Closed Valve, With A Strap On Pulleys And Hooks. The Height Of The Guest Is 22 ± 2 Cm. The Boot Will Have A Cut-Out Muzzle, One-Piece Shins, A Valve And Trim Details Of The Valve And Shins, A Rear Outer Strap And A Trimmed Leather Strap. Connections, Details Of External Connections, Columns And Rear External Belts (Asb) Are Stitched With Two Parallel Seams. To Improve The Stability Of The Shape Of The Shoe, The Shin Is Covered With Leather On The Outer And Inner Sides In The Zone Of Maximum Tension Along The Crest Of The Foot. The Sole Is Combined, Made Of Rubber (Tread Surface And Side) And Polyurethane (Inner Tread Of The Sole) With A Black Protector. The Tread Pattern Depth Is 5+0.2 Mm. The Height Of The Sole Is 3±1 Cm, The Toe Is 2.5±0.5 Cm. Wear-Resistant Rubber With Lightness And Elasticity. Polyurethane Has Good Heat-Shielding Properties, Resistance To Abrasion And Multiple Bends, Which Ensures The Durability Of The Sole And Good Operational Properties. The Inner Trace And Rim Of The Sole Are Made Of Polyurethane As A More Technological Material In The Heel Part. Fibula Bone. The Height From The Upper Edge To The Upper Edge Of The Lower Bog Is 185Mm + 4Mm Bend And Add + 10Mm Under The Bog. The Width In The Upper Part From The Rear Outer Belt To The Upper Bog Is 100 Mm + 10 Mm Start. The Width From The Rear Outer Belt To The Upper Belt Is 80 Mm. The Rear Outer Belt. The Height Of The Rear Outer Belt Together With The Loop Is 180 Mm, To The Loop - 80 Mm. The Length Of The Hook Is 100 Mm. A Partial Plug Is A Detail Of The Cover Finish. Height From The Upper Edge To The Connection In The Center Without Connection To The Coil - 190Mm + 5Mm Connection To The Coil And + 10Mm Connection To The Union. The Width In The Upper Part Is 110 Mm. The Width In The Lower Part Is 40 Mm.