Tenders Are Invited For (18) Delivery Of A Truck With A Hook System

Foreword The Order Is The Delivery Of A Factory New (I.E. Manufactured No Earlier Than 6 Months Before The Date Of Conclusion Of This Contract Indicated At The Beginning), Unused, Complete, Undamaged Truck With A Hook System (Industrial Crane), Intended For Use On Construction Sites , Gravel Mines And Other Industrial Applications, In Difficult Terrain Conditions. The Car Will Be Intended For Use In The Warehouse. Municipal Waste.Technical Requirements1. Trucka) Engine - Type Of Fuel - Diesel Oil - Engine Power Not Less Than 300Kw - Six-Cylinder, In-Line Engine, With A Capacity Of Min. 11,000 Cm³ - Exhaust Emission Standard In Accordance With The Regulations Required On The Day Of Vehicle Registration - Maximum Torque Not Less Than 2000 Nm - Two-Cylinder Air Compressor - Power Take-Off Driven By The Engine With A Variable Displacement Pump - Additional Centrifugal Or Dry Air Filterb) Chassis - Aluminum Fuel Tank With A Capacity Of 250-400L Equipped With A Protective Plate - Adblue Tank With A Capacity Of Min. 40L - Plastic Mudguards - Exhaust System With The End Pipe Leading Upwards, Behind The Cabin - Steel Bumper Or With Steel Corners, Equipped With A Protective Plate - Without Front Run-On Beam - Automatic Towing Coupling At The Rear With A Hand Lever Lifted Up, Adapted For Towing Trailers In Accordance With The Permissible Weight Of The Vehicle Combination For The Described Vehicle - Unregulated, Single-Circuit Power Steering Pump - Spacing Between Axles (First And Second) Not More Than 4500 Mm - Ground Clearance Under Each Axle, With An Unloaded Car At Least 300 Mm - Drive Transmission Configuration 6 X 6 With Permanent Drive On All Axles - Differential Lock - Stabilizers On Each Axle - Permissible Total Vehicle Weight Not Less Than 26,000 Kg - Technical Load Capacity (Permissible Vehicle Load Off Public Roads) Not Less Than 33,000 Kg - Steel, Multi-Leaf, Parabolic Front Springs - Steel, Multi-Leaf, Parabolic Or Trapezoidal Rear Springsc) Clutch And Gearbox - Automatic Gearbox With Off Road Software - Gear Oil Cooling System - Transfer Case With Off-Road Gearsd) Braking And Chassis System - Drum Or Disc Brakes On The Front Axle - Drum Brakes On The Middle And Rear Axles - Steel Rims, Front Axle 11.75X22.5, Rear Axles 9.00X22.5 - On The Rear Axles, Twin Wheels - Road And Off-Road Tires (S+G) In Size, Front 385/65 R22.5 And Rear 315/80 R22.5 - Engine Brake - Moisture Sensor In The Compressed Air System - Steel Compressed Air Tank - Compressed Air Filling Connection Located At The Front - Axles On Planetary Reduction Gearse) Cabin - Day Cab, Two-Person, White, No A Sleeping Cabin Is Allowed - The Space Distance Measured From The Seat Backrests To The Rear Wall Of The Cabin Must Be At Least 25 Cm - Rear Wall Equipped With A Window - Mechanical-Hydraulic Cabin Tilting Mechanism (With Oil Adapted To Work At Temperatures Of -25°C Or Lower) - Pneumatic Sound Signal - Two Keys With Remote Control, Locking System With Central Locking - Side Mirrors Heated With Electric Adjustable - Ramp Mirror - Pneumatic Drivers Seat, Adjustable Min. In Three Planes - Fabric Seat Covers, With Covers - Side Sun Blind On The Drivers Side - Electric Window Lifts On Both Sides - On-Board Computer - Digital Tachograph - Radio With Speakers - Cb Radio - Automatic Heating And Air Conditioning System With Air Regulation - Step Lighting Entrances - Engine Tunnel With A Storage Compartment - Additional 12V Socket - Handrail On The Roof, Making It Easier To Climb Onto The Vehicle Or Steps And Handles At The Rear Of The Cabin - Swinging Lowest Steps To The Cabin F) Electronics/Electrics - Two Batteries (Min. 210Ah) Next To Each Other - Speed Limiter 90 Km/H - Two Factory Warning Lights On The Cab Roof, Led - Side Marker Lights - Led Or Halogen Daytime Running Lights - Fog Lamps - Additional Work Lighting Installed At The Rear Of The Cab And At The Rear Of The Vehicle, Led - 24V Electrical System - Reverse Gear Sound Signal - Manual, Main Power Switchg) Other Equipment - Warning Triangle - Warning Lamp - Fire Extinguisher - Telescopic Vehicle Lift With A Lifting Capacity Of Min. 20T - Two Wheel Chocks - Compressed Air Gun With A Flexible Hose - Tire Inflation Hose, With A Pressure Gauge - Left-Hand Drive, Right-Hand Traffic Vehicle - Vehicle Category N3g, Off-Road Vehicle - One Spare Wheel Size 315/80 R22, 5 And One Spare Wheel, Size 385/65 R22.5 (Spare Wheels Do Not Have To Be Mounted To The Chassis) - Wheel Wrench2. Hook Device - Replaceable, Screwed Hook, Equipped With A Gravity Lock - Automatic Container Blocking Function In The Tipping Function - Hook Height 1570 Mm, In Accordance With The Din 30722 Standard - Construction Of The Hook Device In Places Exposed To The Greatest Loads, I.E. The Place Of The Bend Of The Hook Arm, The Place Of Mounting The Actuators , The Place Of Mounting The Rear Support Roller Must Be Made Using Cast Elements - A Maximum Of Two Rollers Guiding The Container During Pulling In And Taking Out Operations - The Container Cannot Have Contact With Permanent Supports During Pulling In And Taking Out Operations - The Device Must Be Equipped With A Hydraulic Lock To Secure The Transported Container - The Device Must Be Equipped With A Scale In The Hydraulic System Measuring The Mass Of Transported Containers Without The Requirement To Be Certified By The Office Of Weights And Measures - The Device Must Be Adapted To Handle Containers With An Internal Length Of 4.7 To 6.9 M - The Weight Of The Device Together With The Oil Tank And Oil Cannot Be Greater Than 3200Kg - Horizontal Movement Of The Hook Not Less Than 1420Mm - Hydraulic Oil Cooler - Two Lifting Cylinders - Working Pressure Of The Hydraulic System Not More Than 30Mpa - Minimum Lifting Capacity 21000Kg - Device With The So-Called Soft Settling, Eliminating The Impact Of The Container During Settling - A Function Enabling The Execution Of The Entire Sequence Of Loading Or Unloading The Container, Initiated By Pressing One Button Or Lever - An Alarm Signaling That The Hydraulic Lock Of The Container Is Not Fastened Or A System That Does Not Allow The Car To Drive Away - An Electronic System That Prevents Incorrect Movement Hook Device - Hydraulic Locking Of The Rear Axle Springs With Information On The Control Remote Control - Power Supply From A Multi-Piston Hydraulic Oil Pump - The Hook Device Must Come From Series Production - Hook Control Remote Control Equipped With A Display Of Service Error Codes In Polish Or Pictograms - Mounted Camera To View The Hook During Operation Container Attachment Maneuver3. Additional Requirements Order - Delivery Of The Car To The Headquarters Of Order. At The Contractors Expense, Within No Longer Than 210 Days From The Date Of Signing The Contract - During The Warranty Period, The Contractors Service Will Commence Work Within A Maximum Of 24 Hours From The Time Of Written Notification Of The Failure (E-Mail) - The Contractor Will Train 6 People In The Operation And Operation Of The Car And The Hook Device On The Day Of Delivery, Before The Operational Test Is Carried Out - The Car Must Have A Unit Approval Or Approval For The Completed Vehicle On The Day Of Collection - A Certificate Issued By The Office Of Technical Inspection On The Day Of Collection Regarding The Udt Test And The Decision On Admitting The Device To Operation - On The Day Of Delivery, The Contractor Will Provide Order A Set Of Vehicle Documents Necessary For Registration In The Territory Of The Republic Of Poland - The Contractor Will Provide Operating Instructions For The Car And The Hooklift Device, In Polish, In 3 Copies, In A Paper Version And In 3 Copies, In An Electronic Version - The Contractor Will Provide A Catalog Of Spare Parts For The Car And The Hooklift Device In Three Copies, In An Electronic Version - After Installing The Hook Device, The Contractor Will Parameterize The Engine Speed While Working With The Attachment To The Values ​​Given By The Manufacturer Of The Hook Device - All Descriptions On Plates And Displays Must Be In Polish - Full-Vehicle Warranty Period, I.E. . Car, Hook Loader And Scale Without Mileage Limit Min. 24 Months - The Sales Price Should Include The Cost Of All Necessary Periodic Inspections Falling Within The 24-Month Warranty Period, Including Car Inspections And Inspections Of The Hooklift Device, Along With The Weight - If The Contractor Grants A Warranty Longer Than The Required Min. 24 Months, Periodic Inspections Within This Period. Order. Will Be Carried Out At Its Own Expense - During The Use Of The Vehicle, Both During And Outside The Warranty Period, Inspections Of The Installed Hook Device By A Udt Inspector Will Take Place At The Request And Expense Of Order.4. Periodic Inspections During The Warranty Period - Regarding The Hook Device With The Scale Mounted On It Will Be Performed In Accordance With The Provisions In The Operation And Maintenance Manual - Regarding The Truck Will Be Performed In Accordance With The Documentation Provided In The Operation And Maintenance Manual, Except That The Order Requires The Contractor To Take Into Account The Specific Characteristics Of The Work, Which Is That During One, Two-Shift Working Day, A Hooklift Truck In Eko Dolina Covers An Average Distance Of 25 Km, But The Engine Runs For An Average Of 15 Hours. Note: During The Performance Of The Contract, The Contractor Is Obliged To Comply With Occupational Health And Safety Regulations, Fire Protection As Well As The Regulations Applicable At The Place Of Performance, Including: Requirements Related To The Pn-En Iso 14001:2015 Environmental Management System, Which Are Available At The Ordering Partys Office At Its Plant. Ordered By Does Not Provide For Reimbursement Of The Costs Of Participation In The Proceedings.