Tenders Are Invited For Purchase And Delivery Of A New Hooklift Truck

1. The Subject Of The Order Is The Purchase And Delivery Of A Hooklift Truck: Required Technical Conditions: I. Chassis1. Brand New, Completed Min. In 2023 Or Younger.2. Gvm 18 Tons.3. Engine Power 250 Hp, Torque Min. 1050 Nm.4. 4X2.5 Drive. Wheelbase Ranging From 3800 To 3900.6. Technical Load Capacity Of The Front Axle Min. 7500 Kg.7. Technical Load Capacity Of The Rear Axle Min. 13000 Kg.8. Automatic Or Fully Automatic Gearbox.9. Side Exhaust Muffler.10. Heated Fuel Filter.11. Mechanical Battery Main Switch.12. 2 Batteries, 12 V, 180 Ah.13. Alternator 28V, 110 A14. Fuel Tank Capacity Min. 220 L.15. Adblue Fuel Tank Capacity Min. 35 L.16. Abs, Ebs.17 System. Heated Air Dehumidifier.18. Step Engine Brake.19. Air Suspension On The Rear Axle.20. Spring Suspension Of The Front Axle.21. Tires In Size 315/80 R 22.5. + Full-Size Spare Tire.22. Front And Rear Axle Shock Absorbers.23. Front And Rear Axle Stabilizers.24. Drive Axle Differential Locks.25. Central Locking Without Remote Control.26. Plastic Front Bumper.27. Window In The Rear Wall Of The Cabin.28. Led Daytime Running Lights.29. Rearview Mirrors Adjustable And Heated.30. Mechanically Adjustable Front Mirror.31. Manual Air Conditioning.32. Inner Windscreen Visor Foldable.33. Lift 10 T.34. Trailer Coupling, Hitch Eye 40 Mm.35. Trailer Plug Socket 15 Pin.36. Factory Power Take-Off From The Gearbox.37. Factory Radio With 7 Inch Sd Card Reader. 38. Color White Ral 9010.39. Exhaust Emission Standard Min. Euro 6.40. An Additional Box Adapted To The Container Safety Net, Min. 250 Liters.41. Side Overrun Covers.42. Acoustic Safety Reversing Warning Signal With Switch.43. Audible Signal For Reverse Gear Engaged.44. Digital Tachograph.45. Two Wedges, Hydraulic Jack, Vehicle Maintenance Tools, Two Fire Extinguishers, Warning Triangle / 2 Pcs /, First Aid Kit.46. Led Warning Lights On The Roof.47. All Axle Wheels Protected With Mud Covers (Mudflaps).48. The Vehicle Must Be Brand New, Technically Efficient And Ready For Operation, And Meet The Technical And Operational Conditions And Health And Safety Regulations.49. The Vehicle Must Meet The Requirements Of A Vehicle Approved For Driving On Public Roads, In Accordance With The Applicable Provisions Of The Road Traffic Law. Ii. Hook Device – Minimum Parameters1. Brand New, Year Of Production Min. 2023, Building Color Ral 9005.2. Load Capacity 10 T.3. Length Of Supported Containers 3500 – 4500 Mm.4. Hook Height 1200 Mm.5. The Length Of The Device Ranges From 4000 – 4050 Mm.6. Working Pressure 350 Bar.7. Telescopic Main Arm 930 Mm.8. Pneumatic Control Of The Hook Device From The Cabin With The Option Of Turning It Off And Controlling It Outside The Cabin.9. Emergency Manual On The Left Side Of The Device.10. Hook Tip With Mechanical Pawl.11. Rear Internal Hydraulic Lock.12. Tail Lamp Covers.13. Extendable Arm Without The Use Of Slides.14. The Weight Of The Hook Device Is 1100 Kg.15. The Main Elements Of The Supporting Frame And Hook Arm Are Made Of S500 Mc Steel, While The Auxiliary Elements Are Made Of S355.16 Steel. Fitting The Extendable Arm Without Using Slides.17. All Steel Elements Shot-Blasted Before Painting And Assembly.18. Anti-Corrosion Protection - Shot Blasting And Painting With Anti-Corrosion Primer And Topcoat In Ral 9005.19. Main Cylinders And Hydraulic Distributor Made By The Manufacturer Of The Hook Device.20. Inspection Platforms Installed On Both Sides Of The Hook Device.21. An Additional Led Lamp Mounted At The Rear Of The Cabin Illuminating The Hook Device.22. Together With The Vehicle, The Supplier Will Provide The Necessary Documents For Registration, Along With A Current Udt Examination. Iii. Additional Requirements: 1. Warranty For Chassis And Body Min. 24 Months.2. The Contractors Warranty And Post-Warranty Service Must Be Located In Poland.3. As Part Of The Submitted Offer, The Contractor Will Ensure That The Ordering Party Receives An Authorized Service Center At The Ordering Partys Premises Within Max. 48 Hours (2 Business Days) From Written (E-Mail) Notification Of The Defect.4. The Ordering Party Allows Warranty Inspections Of The Chassis - At The Contractors Expense - To Be Performed At The Authorized Service Station Of The Chassis Manufacturer, Located At A Distance Of No More Than 100 Km From The Ordering Partys Headquarters.5. Bodywork Service - Access To The Ordering Partys Headquarters.6. Conducting Training By The Contractor On The Operation Of The Body And Vehicle.7. As Part Of The Submitted Offer (Chassis + Bodywork), The Contractor Will Provide The Ordering Party With Warranty Inspections Along With All Materials At The Contractors Expense.8. The Contractor Agrees To The Possible Additional Installation Of Cameras And Gps Monitoring Devices, Which Will Not Result In The Loss Of The Warranty.9. Delivery Of The Car To The Ordering Partys Headquarters At The Contractors Expense.10. As Part Of The Order, The Contractor Is Obliged To Provide The Ordering Party With An Operating Manual In Polish, Containing At Least A Catalog Of Spare Parts Along With Diagrams Of The Hydraulic And Electrical Systems, Quantities And Types Of Oils And Operating Fluids Used In Individual Systems.11. Service And Warranty Book In Polish.12. Approval For A Complete Vehicle.13. Left-Hand Drive.14. Plastic 5 Liter Tank With A Tap For Hand Washing Water.15. The Contractor Will Provide 7 Years Of Post-Warranty Service Counted From The End Of The Warranty Period.