Tenders Are Invited For Delivery In The Form Of Operational Leasing Of One Brand New Specialized Garbage Truck

1. The Subject Of The Order Is The Delivery In The Form Of Operational Leasing Of One Brand New Specialized Garbage Truck Type - Year Of Production 2023 Or 2024. Note: Chassis And Body, Year Of Production 2023 Or 2024.2. The Contractor Will Be Obliged To Deliver The Items Of The Order To The Registered Office Of The Ordering Party At Ul. Bolta 10 In Brusy (Pomeranian Voivodeship) At Your Own Expense On The Date Of Collection Of The Subject Of The Order Agreed By The Parties. 3. Detailed Description Of The Subject Of The Order: Chassis Parameters: 1) Permissible Total Weight 26,000 Kg. 2) Three-Axle Chassis. 3) Vehicle Frame For A Garbage Truck With A Rear Hopper. 4) Bolted Frame, 5) Vehicle For Right-Hand Traffic 6) Twin Wheel Drive Axle. 7) Wheelbase Not More Than 4000 Mm. 8) Front Mechanical Suspension, Administratively Permissible Load Not Less Than 8,000 Kg. 9) Rear Air Suspension With Height Adjustment, Permissible Load Not Less Than: Rear Axle 11,500 Kg, Trailing Axle 7,500 Kg.10) Front Axle Stabilizer,11) Additional Rear/Trailing Axle Stabilizer12) Rear Axle Differential Lock. 13) Rear Drive Axle With A Free Gear Ratio Selected For Difficult Working Conditions. 14) Engine Power Take-Off Designed For Continuous Operation. 15) Diesel Engine, Power Not Less Than 220 Kw.16) Exhaust Emissions In Accordance With The Euro 6 Standard. 17) Speed ​​Limiter 90 Km/H.18) Flame Or Glow Device Facilitating Engine Starting. The Ordering Party Allows For A Different System For Heating The Engine At Low Temperatures. 19) Automatic Gearbox. The Ordering Party Allows An Automated Gearbox Without A Clutch Pedal. 20) Braking System Equipped With Abs, Asr And Esp. 21) Engine Brake22) Parking Brake.23) Electronic Parking Brake.24) Disc Brakes On All Axles. 25) Heated Air Dryer. 26) Moisture Sensor In The Compressed Air System 27) Tires Not Smaller Than 315/80R22.5. 28) Steel Rims29) Spare Wheel. 30) Three-Person Cabin, Driver + 2 Passengers – So-Called Short Day.31) Cabin With A Minimum Width Of 2.30 M. 32) Cabin Equipped With Automatic Air Conditioning. The Ordering Party Allows The Vehicle To Be Equipped With Manual Air Conditioning Controls, 33) Electrically Operated Cabin Windows. 34) Drivers Seat Suspended On Air Suspension. 35) Left-Hand Steering Wheel With Tilt And Height Adjustment. 36) Rear-View Mirrors Compliant With Applicable Road Traffic Regulations, Heated And Electrically Operated. 37) Drivers Side Sun Visor. 38) Windshield Tinted. 39) Cabin Color: Orange Ral 2011. The Ordering Party Allows The Cabin To Be White. 40) On-Board Computer With A Display In Polish. 41) Digital Tachograph. 42) Cabin Equipped With A Radio Player. 43) Central Locking. 44) 24V Socket In The Drivers Cabin45) Pneumatic Connector In The Drivers Cabin46) Roof Hatch/Ventilation Flap In The Roof47) Steel Bumper. The Ordering Party Allows The Vehicles Bumper To Be Made Of Plastic With Steel Covers Protecting The Corners Against Damage. 48) Bumper, Central Part With A Towing Hook, 49) Side Protective Beams Preventing Driving Under A Garbage Truck. 50) Mud Flaps On The Fenders. 51) Led Warning Beam With The Inscription Zgk Brusy Mounted On The Cab Roof. 52) Fuel Tank, Minimum 250 Liters, With A Lockable Filler Cap. 53) Additional Closed Box For Transporting Tools. 54) Batteries Of Minimum 200 Ah, Mounted Next To Each Other.55) Application Connector For Gps Companies.56) Acoustic Signal (Buzzer) For Reverse Gear And Opening And Closing Of The Tailgate.57) Immobilizer Parameters Taking Into Account The Garbage Truck Body: 1) Box Body With Rear Device Hopper. 2) Rigid Construction Of The Load Box, Completely Welded And Tight. 3) Permissible Load Capacity Not Less Than 17,000 Kg. 4) Load Box Capacity – Minimum 21 M³. 5) Oval-Shaped Cargo Box. 6) Universal Loading Device Adapted To Work With Containers From 120 To 1,100 Liters. 7) The Walls Of The Load Box Are Smooth, Without Ribs, Made Of Uniform Steel Sheets With A Minimum Thickness Of 4 Mm. 8) The Oval-Shaped Load Box Floor Is Made Of Hardox 450 Wear-Resistant Steel Or Equivalent And Is At Least 4 Mm Thick. 9) Load Box With Inspection Door On The Side Wall. 10) The Hopper Is Made Of Steel With Increased Parameters Hardox 450 Or Equivalent And A Minimum Thickness Of 8 Mm. 11) Capacity Of The Loading Tub Is At Least 2.0 M³. 12) Drain Connector In The Loading Tub With A Valve.13) Linear-Plate (Drawer) Crushing Mechanism With Pusher Plate Guides Placed On The Walls Of The Structure.14) Waste Compaction Degree Minimum 1: 5. 15) Abdomen Opening Cylinders Placed On The Sides Of The Load Box, Press Cylinders Thickening Placed Outside The Tailgate16) Fully Tight Connection Between The Tailgate And The Load Box.17) Control Of The Press Loading Mechanism In Automatic, Continuous, Single And Manual Cycles Using Buttons18) Manual Control Cycle With The Possibility Of Independent Activation Of Individual Phases.19) Control Of The Ejection Plate (In And Out) From The Drivers Cabin And Using Buttons Located On The Load Box.20) System For Releasing Jammed Objects.21) Automatic Control Of Engine Speed Depending On The Load On The Hydraulic System.22) Bodywork Control Panel Mounted In The Drivers Cabin, Enabling, Among Others, Incl. Selection Of The Type Of Waste Collected (Recoverable, Mixed, Bio, Glass, Dimensions), Information On The Occupancy Of Loader Steps, With The Function Of Switching On The Opening And Emptying Of The Body, Work Lighting, Warning Lamps, Lifting The Tailgate And Emptying The Load Box. Additionally, A Monitor With A Camera To Observe The Operating Field Of The Loading Device - Coin Validator23) At Least Two Safety Switches (Emergency Stop) Located On Both Sides Of The Structure, One Safety Switch In The Drivers Cabin.24) Open Type Loading Device For Mgb Containers In Accordance With The Pn-En Standard 84025) Loading Device Controls Located On Both Sides Of The Tailgate. 26) Coin Validator Factory Equipped With Loading Arms For 4-Wheeled Containers According To Din27) Anti-Dust Curtains Mounted On The Body.28) Coin Validator With A Foldable Flap Enabling Lowering The Loading Edge For Unloading Bags.29) Coin Validator Fully Galvanized And Painted In Color Orange. .The Ordering Party Allows The Coin Validator To Be Painted White30) The Device For Opening The Lids Of Containers And The Container Bumper Operated Electrically And Pneumatically31) The Structure Is Shot-Blasted, Primed And Painted In White.32) Road Lighting In Accordance With Currently Applicable Road Traffic Regulations.33) Two Work Lights At The Rear Of The Structure34 ) Additional Lighting Illuminating The Working Area On The Sides Of The Vehicle, 3 Lamps On Each Side Of The Body,35) Warning Reflective Stripes On The Cabin And On The Body 36) Camera Located At The Rear Of The Body And A Color Monitor Of At Least 5 Mounted In The Panel In The Drivers Cabin,37) Lighting Working On The Sides And Rear Of The Structure In Accordance With Applicable Regulations, Made In Led Technology. 38) Warning Lighting Installed In The Front And Rear Parts Of The Structure, Protected Against Mechanical Damage, In Accordance With Applicable Regulations, Made In Led Technology. 39) Lighting On The Bodywork, I.E. Brake Lights, Parking Lights And Turn Signals In Accordance With Applicable Regulations, Made Using Led Technology. 40) Two Steps For Loaders With Sensors Automatically Informing The Driver Which Step Is Occupied And, In Case Of Occupancy, Enabling: - Limiting Forward Speed To 30 Km/H, - Preventing The Vehicle From Reversing, - Blocking The Operation Of The Kneading System.41) System Central Lubrication Of The Body Min. 30 Points Lubricants.42) Water Tank With A Tap For Washing Hands.43) Tool Box And Drawer For Bags.44) The Structure Is Equipped With An Additional Installed Fire Extinguisher And Holders For A Broom And Shovel. 45) The Bodywork Must Meet Currently Applicable Eu Standards, Including En 1501-1, And Have A Ce Declaration Of Conformity.46) Application Connector For Gps Companies.47) System For Controlling The Uniform Level Of Waste Density Throughout The Entire Cross-Section Of The Load Box. Additional Equipment Of The Vehicle: 1) Adapted Hydraulic Lift For The Vehicle Min. 12 Tons. 2) 2 Wheel Chocks. 3) First Aid Kit (Equipped In Accordance With Applicable Regulations). 4) Fire Extinguisher Installed In The Vehicle Cabin. 5) Warning Triangle. 6) Wheel Wrench. 7) A Set Of Repair Wrenches. 8) Wheel Inflation Hose. 9) Rubber Mats.4. Required Documents That The Contractor Will Be Obliged To Provide Along With The Subject Of The Order: 1) Chassis Operation Manual (In Polish). 2) Instructions For Use, Operation And Maintenance Of The Structure (In Polish). 3) Spare Parts Catalog For The Chassis And Bodywork (In Polish). 4) Chassis Warranty Book. 5) Body Warranty Book. 5. Additional Conditions: 1) The Vehicle Delivered By The Contractor Must Be Able To Install (Without Losing The Warranty) The Vehicle Monitoring System Used By The Ordering Party - Gps. 2) The Costs Of Delivering The New Vehicle To The Ordering Partys Headquarters Are Borne By The Contractor. 3) On The Day Of Acceptance, The Contractor Must Train 6 Employees Of The Ordering Party In The Proper Operation And Maintenance Of The Complete Vehicle And Will Issue Certificates Of Completion Of Training.