Bids Are Invited For Acquisition Of Furniture And Equipment For The City Council Of Pentecoste

Recording Cabinet For Az Folders Made Of Steel Plate #26 (0.45Mm) Specification: Standardized Cold Rolled On The Sides And Galvalume Plate #26 On The Bottom And Dividers; It Has 4 (Four) Fixed Shelves, Both In Steel Sheet #24 (0.60Mm) Standardized Cold Rolled In The Measurements Of 30Mm(H)X1000mm(W)X270mm(D) With 6 Folds In Its Depth With Support Of Up To 60 Kg Each. The Sides In Steel Sheet #26 (0.45Mm) With 1980Mm(H) It Has An Upper And Lower Lock Made Of #20 Steel Sheet With A Lever System For Locking On The Sides. It Has 45 Dividers Made Of Gavalvume Steel Sheet (Al+An) #26 (0, 45Mm) Forming 50 Free Spaces Measuring (H)X100mm(W)X300mm(D), With A 360° Bend At Each End. The Entire Product Must Be Treated By An Anti-Corrosive Process Based On Zinc Phosphate And Electrostatic Powder Painting (Hybrid Paint) With A Layer Of 30 To 40 Microns With Drying In An Oven At 240 °C With Liquid Electrostatic Painting Synthetic Enamel With A Layer Of 30 A 40 Microns With Oven Drying At 120 °C. This Product Must Be Assembleable Using A System Of Locks, Lever And Nail, Developed In High Stamping Technologies, There Is No Need To Use Screws. The Cabinet Must Have The Following Measurements: 200X1100x330 Cm (Hxwxd) With Variation Of +/- 5%; Product Must Meet The Requirements Of Regulatory Standard Nr-17.3 (Furniture For Workstations) Of The Ministry Of Labor And Employment Through The Presentation Of An Ergonomic Compliance Report With Nr 17, By An Ergonomics Professional Certified By Abergo With Validity To Expire , On The Letterhead Of The Professional Who Carries Out The Analysis, Issues And Signs The Report, With A Photo Of The Product And Its Technical Description In The Manufacturers Document, Mentioning Standard Nr-17, Analysis And Conclusion. The Price Proposals Of The Bidder Who Does Not Present Them, 2-Door Steel Cabinet Minimum Specifications: Lock With Key And 05 Partitions, Will Be Disqualified. Measurements: 200Cm Height X 0.84Cm Width X 0.42Cm Depth With Variation Of +/- 5%. Be Made From Standard #26 Cold Rolled Steel Sheet On The Sides, Bottom, Shelves And Doors; Have Doors With Hinges Welded Using Electronic-Pneumatic Spot Welding And Reinforced Zinc Plated Ring Pin And Yale Type Cylindrical Lock With 2 Keys With Door Lock On The Central Fixed Shelf; They Must Be Painted With Anti-Corrosive Treatment Using A Nanotechnology Process And Electrostatic Powder Painting (Hybrid Paint) With A Layer Of 30 To 40 Microns With Drying In An Oven At 240 °C In Gray Color; Have A Built-In Printed Handle On The Entire Vertical Part Of The Door With A Pvc Profile Finish In Gray; It Has 4 Shelves, 3 Of Which Are Mobile With The Option Of Adjustment By 50 To 50 Mm Racks Exposed On The Entire Side Of The Cabinet, And 1 Is Fixed, Both With Horizontal “Omega” Reinforcements In Laminated Steel Sheet #26 (0.45Mm). Cold With 4 Folds; It Has A Kit Of Removable Leveling Feet Made Of High-Impact Polypropylene In Black, Fixed To The Cabinet Using 4 Bushings With Internal Threads And 12 13Mm Screws; Product Can Be Assembled Using A System Of Locks, Levers And Nails; Product Must Meet The Requirements Of Regulatory Standard Nr-17.3 (Furniture For Workstations) Of The Ministry Of Labor And Employment Through The Presentation Of An Ergonomic Compliance Report With Nr 17, Anal