Tenders Are Invited For Modernization And Equipment Of Playgrounds In The Jonkowo Municipality

1. The Subject Of The Order Is The Implementation Of An Investment Task As Part Of The Project Modernization And Retrofitting Of Playground Equipment In The Jonkowo Commune - Consisting Of Delivery Including Transport (Including Loading And Unloading) And Installation Of Playground Equipment And Small Architecture Elements On 17 Playgrounds In In The Jonkowo Commune. 2. Scope Of Delivery: 1) Double Metal Swing - 1 Pc. A) Minimum Components: Full Seat (Basket For Smaller Children) 1 Pc. On Stainless Steel Chains And A Board-Type Seat 1 Pc., B) Steel Legs Min. . Ø 75 Cm, Protected With Zinc Primer, Finished With Polyester Varnish,C) Device Mounted On A Concrete Foundation.2) Dragonfly Swing - 1 Pc.A) Two-Person Weighing Swing With Anti-Slip Seat,B) Protected With Zinc Primer, Finished With Polyester Varnish,C) Seat Made Made Of Hdpe Board, D) Plastic Or Stainless Steel Handles. 3) Chess/Checkers Table - 1 Piece A) Structure: Steel Profiles, Aluminum Strips, B) Equipped With Four Seats, C) Protected With Zinc Primer, Finishing Sticker With Laminate, Polyester Varnish.4) Disc Carousel With Seats - 4 Pcs.A) Dimensions Min. Ø 150 Cm, B) Min. 2 Seats Made Of Hdpe Board, 1 Steering Wheel, C) Galvanized And Powder-Coated Steel Elements, D) Floor Made Of Checkered Sheet Metal With An Anti-Slip Layer. 5) Four-Armed Disc Carousel - 2 Pcs.A) Dimensions Min. Ø150 Cm, B) Equipped With Min. With 4 Handrails, C) Galvanized And Powder-Coated Steel Elements, D) Floor Made Of Checkered Sheet With An Anti-Slip Layer. 6) Recycling Board - 2 Pieces A) Made Of Galvanized Steel Pipes, B) Equipped With A Multi-Function Panel Of Hdpe Or Hpl Boards. 7) Single-Seat Rockers On Springs - 6 Pieces, A) Rockers With Hand Grips And Leg Supports, B ) One Seat Made Of Hdpe Board, C) Galvanized And Powder-Coated Steel Elements, D) Mounted On Concrete Foundations. 8) Two-Seat Spring Rockers - 2 Pieces, (Other Than Item 7A) Rockers With Hand Grips And Supports Under The Feet,B) Two Seats Made Of Hdpe Board,C) Galvanized And Powder-Coated Steel Elements,D) Mounted On Concrete Foundations.9) Balance Ball On Springs - 1 Piece A) Seat Height 45 Cm,B) Seat Made Of A Balancing Beam Wooden, C) Protected With Zinc Primer, Finished With Polyester Varnish, D) Mounted On Concrete Foundations. 10) Cylinder With Rotating Treadmill - 1 Pc. A) Structure: Steel Pipes And Profiles, B) Finishing: Hdpe Board, Grooved Board, C) Protected With Zinc Primer, Finished With Polyester Varnish. 11) Single Metal Swing - 1 Pc. ) Basket/Bucket Seat With Stainless Chain, B) Four Steel Legs Min. Ø 75 Cm, Protected With Zinc Primer, Finished With Polyester Varnish, C) Device Mounted On A Concrete Foundation. 12) Square Sandbox - 1 Piece A) Square Sandbox, Finished With An Hdpe Board, B) Structure Made Of Coreless Wood, C) Dimensions Min. 300Cm X 300Cm. 13) O And Stork Nest - 1 Pc. A) Minimum Components: Stork Nest Swing - 1 Pc., B) Glued Wood Structure, C) Secured With Zinc Primer, Finished With Polyester Varnish.15) Single Climbing Wall - 1 Pc. A) Structure With Pipes, Climbing Wall Made Of Hdpe, B) Minimum Components: Climbing Wall At Least 1 Piece (With Handles), Rope Wall (Truss) Or Metal Bars, C) Minimum Two Steps, D) Secured With Zinc Primer, E) Maximum Fall Height: 2.0 M.16) Storks Nest Metal Swing - 1 Pc. A) Minimum Components: Storks Nest Swing - 1 Pc., B) Steel Legs Min. Ø 75 Cm, Finished With Polyester Varnish, C) Structure Made Of Stainless Steel Or Hot-Dip Galvanized Steel And Powder-Coated Or Powder-Galvanized And Powder-Coated, D) Stainless Steel Chains, Calibrated, Preventing The Fingers From Getting Stuck.17) Double Metal Swing - 1 Pc. A) Components: Board-Type Seats - 2 Pcs., B) Stainless Steel Chains, Calibrated, Preventing The Fingers From Getting Stuck, C) Structure Made Of Stainless Steel Or Steel, Hot-Dip Galvanized And Powder-Coated, Or Powder-Galvanized And Powder-Coated. 18) Bench (Set) - 2 Pcs. A) Minimum Components Of The Set: Bench With Backrest 2 Pcs., Table 1 Pc. Min. Length: 150 Cm, Height: 70 - 80 Cm., B) Seat And Backrest Made Of Painted Wooden Slats, C) Powder-Galvanized And Powder-Coated Steel Structure, D) Mounted On Concrete Foundations. 19) Metal Bench Without Backrest - 5 Pcs.A) Seat Height 43 - 55 Cm, Length Min. 150 Cm, Depth 50 - 70 Cm, B) Seat Made Of Coniferous Wood Slats Without Resin Or Hardwood Leaks, Painted With Varnish Protecting Against Weather Conditions And Properly Protected Against Fire, With A Smooth Texture, Without Burrs And Damage, C) Powder-Galvanized Steel Structure And Powder Coated, D) Mounted On Concrete Foundations 20) Metal Benches With Backrest - 4 Pcs A) Seat Height 43 - 55 Cm, Height With Backrest Up To 60 - 80 Cm, Length Min. 150 Cm, Depth 50 - 70 Cm, B) Seat And Backrest Made Of Coniferous Wood Slats - Without Resin Or Hardwood Leaks, Painted With Varnish Protecting Against Weather Conditions And Properly Protected Against Fire, With A Smooth Texture, Without Burrs And Damage, C) Structure Powder-Galvanized And Powder-Coated Steel, D) Mounted On Concrete Foundations. 3. Place Of Delivery: Playgrounds In The Towns Listed Below In The Commune Of Jonkowo, Province. Warmian-Masurian Voivodeship, Poviat Olsztyn: Mątki, Gamerki Wielkie, Szałstry, Nowe Kawkowo, Pupki, Wrzesina, Warkały, Węgajty, Jonkowo, Stękiny, Godki, Giedajty, Garzewko, Wołowno, Łomy, Porbady, Stare Kawkowo.