Tenders Are Invited For Performing Partial Renovations Of Bituminous Surfaces In The Brwinów Commune Using A Recycler On An Area Of ​​Up To 2,439.0 M2.

1. The Subject Of The Order Are Construction Works Consisting Of: Partial Renovation Of Bituminous Surfaces In The Brwinów Commune Using A Recycler On An Area Of ​​Up To 2,439.0 M².2. The Material Scope Of The Subject Of The Order Includes The Following Works: 1) Partial Renovation Of Bituminous Surfaces With Mineral-Asphalt Mass With An Average Layer Thickness Of Up To 8 Cm: A) Cutting The Edges Of The Defect With A Circular Saw And Giving It A Regular Shape, B) Removing The Excavated Material, C) Cleaning The Damaged Areas, D) Sprinkling The Base And Walls Of The Defect With Asphalt Emulsion, E) Filling The Defects With Mineral-Asphalt Mass Using A Recycler In Accordance With The Scope Of Work, F) Compacting The Surface With A Plate Compactor To The Level Of The Existing Surface Or With A Steel Roller. 2) Adjustment Of Underground Equipment Elements (Gate Valves, Hydrants , Wells, Etc.) To The Surface Level (Within A Radius Of Half A Meter From These Devices, Filling With Mineral-Asphalt Mass Using A Recycler), 3) Securing And Marking The Area Covered By The Works, 4) Filling Any Surface Defects During The Warranty Period With Mineral-Asphalt Mass, Strengthening It With An Emulsion Bituminous.3. The Detailed Scope, Sequence Of Partial Renovations And The Date Of Handing Over The Work Site For The Ordered Scope Of Partial Renovations As Well As The Date Of Completion Of The Works Will Be Provided By The Ordering Party To The Contractor Each Time In Writing With Acknowledgment Of Receipt Or By E-Mail. It Is Permissible For The Ordering Party To Report The Site Of Renovation By Telephone In A Situation That Poses A Threat To Road Traffic Safety, Which Will Be Immediately Confirmed In Writing Or Electronically.3.1. The Contractor Is Obliged To Start The Implementation Of Each Order On The Date Of Handing Over The Work Site Specified In The Given Order.4. The Method Of Execution Of The Subject Of The Order Is Specified In The Technical Specification For The Execution And Acceptance Of Works Constituting Annex No. 5 To Swz.5. The Ordering Party Does Not Require The Contractor To Visit The Site Or Check The Documents Necessary To Complete The Order, Available On-Site At The Ordering Party.6. Based On Article. 95 Of The Public Procurement Act, The Ordering Party Specifies The Requirements Related To The Implementation Of The Order In Terms Of Employment By The Contractor Or Subcontractor Based On The Employment Relationship Of Persons Performing Activities Related To The Implementation Of The Order, Consisting Of Cutting The Edges Of The Defect, Milling The Surface, Removing The Excavated Material And Cleaning The Edges, Filling The Defect With A Mineral-Asphalt Mass. Using A Recycler, Compacting The Filled Cavity With A Vibrating Plate Or Steel Roller.