Bids Are Invited For Price Registration For Eventual And Future Acquisition Of Fde Standard School Furniture, Toys, Psimotor Equipment, Kitchen Equipment And Trash Trash Sets, According To The Terms Of Reference And Other Annexes To The Notice

File For Hanging Folders Steel File For Hanging Folders, 1335Mm High, With 4 Drawers Mounted On Telescopic Rails That Allow Total Opening, Equipped With Leveling Shoes On The Base Steel Sheet Sae 1010/1020: - Body And Internal Structure In Plate 22 (0.75Mm). - 24 Sheet Metal Drawers (0.60Mm). - Telescopic Rails And Zinc Plated Guides In Plate 18 (1, 20Mm) Or Higher. - Sheet Metal Drawer Locking Rod 16 (1.50Mm). - Lower Closing (Next To The Floor) In Plate 24 (0.60Mm). The Handles In Metallic Material With Steel Finish. The Cylindrical Drum Lock (Minimum 4 Pins) With Simultaneous Drawer Locking System. The Keys In Duplicate. Folder Compressors In All Drawers. The Stamped Or Overlapping Label Holder, The Latter Being Exclusively Made Of Non-Ferrous Metal Alloy, Chromed Or Nickel-Plated. The Drawers Are Equipped With Telescopic Rails Made Up Of Linear Guides With Steel Ball Bearings, With A Minimum Vertical Load Capacity Of 45 Kg And An Anti-Escape Mechanism. The Leveling Shoes In Chromed Metal With Injected Polypropylene Base With Dimensions 35Mm X 3/8 X 1 (See References). The Nut Welded Internally To The Base For Fixing The Shoes. Electrostatic Painting In Epoxy/Polyester Hybrid Powder Paint, Polymerized In An Oven, Smooth And Glossy Finish, Minimum Thickness Of 40 Micrometers In Gray Color (See References). Measurements: 1335 In Each Compartment Steel Sheet Sae 1010/1020. - Body, Dividers And Doors In Sheet Metal 22 (0.75Mm). - Shelves And Door Reinforcement In Sheet Metal 20 (0.90Mm). - Plate Base 18 (1.25Mm). - Door Locking Bars Ø = 1/4 (Minimum). - 14 Sheet Metal Hinges (1.9Mm). Each Door Must Give Access To An Independent Compartment, Separated By Means Of A Vertical Partition. O 03 (Three) Shelves Per Compartment, Removable And Adjustable. Internal Hinges Not Visible On The Exterior Of The Furniture With A Minimum Of 75Mm In Height - Three Units Per Door. The Handle And Canopy Are Entirely Metal, Made Of Non-Ferrous Alloy, Chrome-Plated, With Locking Using A Cremona System. The Cylindrical Drum Lock Built Into The Handle With A Minimum Of 4 Pins. Duplicate Keys Attached To Corresponding Door Handles. The Stamped Or Superimposed Label Holder, The Latter Being Exclusively Made Of Chrome-Plated Non-Ferrous Metal Alloy. Electrostatic Painting In Epoxy/Polyester Hybrid Powder Paint, Minimum Thickness Of 40 Micrometers In Gray Color (See References). On Metal Parts, Anti-Rust Treatment Must Be Applied To Ensure Resistance To Corrosion In A Salt Spray Chamber For At Least 240 Hours. The Degree Of Rusting Must Be Ri0 And The Degree Of Blistering Must Be D0 /T0. Measurements: 1600 Steel Sheet Sae 1010/1020. - Body, 75Mm). - Compartment Floor Made Of Sheet Metal 20 (0.90Mm). - 16 Sheet Metal Feet (1.50Mm). - 14 Sheet Metal Hinges (1.9Mm). - Hook-Shaped Hangers - Plate 14 (1.9Mm). Internal Hinges Not Visible On The Outside Of The Furniture With A Minimum Height Of 75Mm - Two Units