Automatic External Defibrillator With The Following Technical Specifications: Registration With The Ministry Of Health No. 80058130008; Technical Standards Abnt Nbr Iec 60601-1; Abnt Nbr Iec 60601-1-2; Abnt Nbr Iec 60601-1-6; Abnt Nbr Iec 60601-2-4. Relevant Certifications: Product Certification - Inmetro. Degree Of Protection Against Electric Shock: Internally Energized When In Operation And Class Ii When The Battery Is Under Charge. (Note: Model With Disposable Battery: Internally Powered). Classification Of Applied Parts: Type Cf Defibrillation-Proof Applied Parts. (Applicable To Each Module: Shock Pads, Spo2, Ecg And Cpr Feedback). Protection Against Harmful Water Penetration: Ip56. Degree Of Safety For Use In The Presence Of A Flammable Anesthetic Mixture. Equipment Not Suitable For Use In The Presence Of A Flammable Mixture With Air, O2 And N2o. Operating Mode: Non-Continuous Operating Cycle: On Max - Capacitor Load: 6 Seconds Off Min Interval Between Shots: 30 Seconds. Battery Charger With Input: 100 – 240 Vac/ 50 – 60 Hz Output: 12.6Vdc - 800M. The Combination Of The Charger And The Equipment Makes Up A System. Internal Power (Internal Battery), Type: Lithium-Ion Rechargeable, 11.1 Vdc, 2200Mah. Internal Power (Internal Battery). Battery Full Charge Time (Completely Discharged): 4 Hours. Temperature From 10ºc To 60ºc. Means Used To Separate Equipment From The Electricity Network With Network Plug. Maximum Cumulative Operator/Patient Exposure Time To Equipment Approximately 10 Hours (Battery Life). Data Recording In Internal Memory (2Gb), Data Recording Capacity For The Lifetime Of The Equipment Without The Need For Transfer. Operating Temperature: 10°C To 40°C; Operating Humidity: 30% To 75%. Operating Atmospheric Pressure: 700 Hpa To 1060 Hpa (525 Mmhg 795 Mmhg). Storage Temperature: 0 ºc To 50 ºc. Storage Humidity: 10% To 95%, No Condensation. Transport Conditions. Ambient Temperature Range From 0ºc To..., 05/06/2024
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
