1. The Subject Of The Order Is The Supply Of Wood Chips Meeting The Standards Pn-S1/D-95018 In An Estimated Quantity Of Approximately 5,000 Mp. Together With Unloading In A Warehouse Intended For Wood Chips. Required Parameters Of Wood Chips: A) Wood Chips Obtained Using A Drum/Knife-Disk Chipper From Defective Coniferous/Hardwood Woodb) Minimum Calorific Value For Coniferous Wood 9 Gj/Tc) Minimum Calorific Value For Deciduous Wood 10 Gj/ Td) Humidity 30-35%E) Fraction In The Range Of 3X3x3 Cm To 5X3x3 Cmf) The Supplied Wood Chips Must Have An Attestation, Certificate Or Quality Certificate, Which The Supplier Will Show At Each Request Of The Ordering Party.G) The Wood Chips Cannot Be Rotten Or Rotten, Cannot Be Contaminated With Snow, Ice, Earth, Sand, Wet Leaves, And Must Not Contain Any Other Additives That Could Damage The Boiler Or Other Devices. The Total Content Of Impurities That Reduce The Calorific Value Of Wood Chips, Such As Bark, Sawdust And Needles, Cannot Exceed 5% Of The Supplied Batch Of Wood Chips. The Above-Mentioned Amounts Of Wood Chips To Be Purchased And Delivered Are Indicative. They Represent Only The Expected Maximum Quantities Of Wood Chips Purchased And Delivered During The Order Execution Period. The Ordering Party Reserves The Right To Reduce The Total Amount Of Purchase And Delivery Of Wood Chips By 40%, Depending On The Actual Needs, Without The Contractors Right To Submit Any Claims Against The Ordering Party In This Respect.
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
