Bids Are Invited For Continuous Preventive And Corrective Maintenance Services For Fire Fighting Equipment, Including Recharge, Hydrostatic Testing, Painting And Replacement Of Parts And Accessories.

Level Ii Maintenance Of Ap 10 Liter Extinguishermaintenance Of Level Ii Ap 10 Liter Extinguisher -- This Will Include The Complete Disassembly Of All Components Of The Extinguisher For Cleaning. Next, A Visual Inspection Of The Parts And The Internal Part Of The Extinguisher Must Be Carried Out. All Components That Come Under Pressure Must Then Be Tested And Rehearsed. Finally, The Extinguisher Must Be Reassembled And The Ring, Lock, Seal, Other Components And The Appropriate Inmetro Seal And Warranty Term Will Be Placed. It Must Also Be Carried Out, If Necessary, The Extinguisher Recharge, Replacement Of Broken Seal(S), Replacement Of Broken External Identification Ring, Replacement Of Components, When Necessary, With Other Original Ones, Adjustment Of Relief Valves And/Or Or Pressure Regulator, When Any, Review Of Defects In The Running, Transport Or Drive Systems, According To Standard Abnt Nbr 12962, Inmetro Ordinance 005/2011 And Updates. Periodicity: Maintenance Is Mandatory And Must Be Carried Out Every 12 Months (Annually) Or As Required By Corrective Maintenance. Material: Portable Pressurized Water Extinguisher With Nominal Load Of 10 Liters, Intended For Fighting Class A Fire Starters, For Small Areas, Extinguisher Capacity 2-A., Maintenance Level Iii Extinguisher Ap 10 Litersmaintenance Level Iii Extinguisher Ap 10 Liters -- It Will Follow Exactly The Same Maintenance Sequence As Level 2, But Includes Two Additional Steps. The First Of These Is The Hydrostatic Test, Which Serves To Identify The Integrity And Resistance Of The Cylinder. The Second One Is Painting The Cylinder: Repainting As Per Standard And Placing The Instruction Board, When Necessary. Fire Extinguisher Containers And Cylinders Must Be Externally Painted Red, Preferably In Accordance With The Munsell 5 R 4/14 Standard. Periodicity: Maintenance Is Carried Out In Accordance With Abnt Nbr 13485, Inmetro Ordinance 005/2011 And Updates And Must Be Carried Out Every 5 Years Or In A Shorter Period Of Time Depending On The Demand For Corrective Maintenance. Material: Portable Pressurized Water Fire Extinguisher With Nominal Load Of 10 Liter, Maintenance Level Ii Extinguisher Pqs 6 Kg Bcmaintenance Level Ii Extinguisher Pqs 6 Kg Bc -- Will Include Complete Disassembly Of All Extinguisher Components For Cleaning. Then, Inmetro Ordinance 005/2011 And Updates. Periodicity: Maintenance Is Mandatory And Must Be Carried Out Every 12 Months (Annually) Or As Required By Corrective Maintenance. Material: Portable Direct Pressurization Fire Extinguisher, With Bc Dry Chemical Powder Charge And Nominal Load Of 6 Kg, Intended For Fighting Fire Principles Of Classes B (Flammable Liquids) And C (Electrical Equipment), Extinguishing Capacity 20-Bc., Maintenance Level Ii Extinguisher Pqs 12 Kg Bcmaintenance Level Ii Extinguisher Pqs 12 Kg Bc -- This Will Include The Complete Disassembly Of All Components Of The Extinguisher For Cleaning. Next, A Visual Inspection Of The Parts And The Internal Part Of The Extinguisher Must Be Carried Out. All Components That Come Under Pressure Must Then Be Tested And Rehearsed. Finally, The Extinguisher Must Be Reassembled And The Ring, Lock, Seal, Other Components And The Appropriate Inmetro Seal And Warranty Term Will Be Placed. It Must Also Be Carried Out, If Necessary, The Extinguisher Recharge, Replacement Of Broken Seal(S), Replacement Of Broken External Identification Ring, Replacement Of Components, When Necessary, With Other Original Ones