Relay Base With Metallic Support - Detailed: Lighting Photoelectric Relay Base, Nominal Current 32A, Luminary Mounting Type, Use Of Photocell To Determine H, With Mounting, Application Intended For Studying The External Photoelectric Effect, Additional Components Interference Filters, Set Of 3 ; Filters, 2-Curved Arm With Shoes With 2 Holes For 16X250mm Screws. Horizontal Projection Of 2.50 Meters In Carbon Steel Galvanized Surface Treatment For Public Led Lighting. - Detailed: 2-Curved Arm With Shoes With 2 Holes For 16X250mm Screws Horizontal Projection Of 2.50Mts In Carbon Steel Galvanized Surface Treatment For Led Public Luminaire, Flexible Pvc Cable 750 V, 3 Conductors Of 1.5 Mm² - Detailed: Flexible Pp Pvc Cable 750 V, 3 Conductors Of 1.5 Mm², Led Luminaire For Public Lighting, From 138 W To 180 W, Housing In Aluminum Or Stainless Steel - Detailed: Public Luminaire With Nominal Power Of 150 W. Must Have The Following Requirements: Nominal Power Of 150W; Color Temperature (Tcc) 4,000K To 5,000K; Frequency 50/60Hz; Minimum Power Factor 0.95; Operating Temperature - 5ºc À + 50 °C, Harmonic Distortion (Thd) 70; Led Lifespan (L70) Minimum 50,000 Hours; Body Material Injected Aluminum Or Similar Painted In Gray Ral 7035; Minimum Degree Of Protection Ip66, With Support For Fixing Arms From 48Mm To 60.3Mm And Angle Adjustment Of +/- 15º Without The Use Of Adapters. The Luminaire Must Be Approved By Inmetro. Present The Catalogue, Inmetro Certificate Of Conformity, Inmetro Registration Number And Reports Presented For Approval By Inmetro. Lower Power Luminaires Will Be Accepted As Long As They Meet The Minimum Total Luminous Flux Required, That Is, Higher Efficiency (Lm/W) . In All Cases, They Must Have A 5-Year Warranty., M16 Screw In Galvanized Steel, Length = 250 Mm, Diameter = 16 Mm, Machine Thread, Square Head - Detailed: M16 Screw In Galvanized Steel, Length = 250 Mm, Diameter = 16 Mm, Machine Thread, Square Head
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.