Full Civil Engineer With Additional Charges, General Construction Supervisor With Additional Charges, Night Watchman With Additional Charges, Rental Of Container 2, 30 X 6.00 M, Height 2.50 M, With 1 Toilet, For Office, Complete , Without Internal Dividers (Does Not Include Mobilization/Demobilization), 30 Of Construction Plate With Galvanized Sheet And Wooden Structure. Af_03/2022_Ps (2.0 Af_07/2020_Ps, Water Measuring Easel Kit - Main Entry, In Weldable Pvc Dn 25 (¾) Supply And Installation (Excluding Hydrometer). Af_11/2016, Siding With Metallic Tile. Af_05/2018, Loading, Maneuvering And Unloading Debris In A 10 M³ Dump Truck - Loading With Hydraulic Excavator (0.80 M³ / 111 Hp Bucket) And Free Unloading (Unit: M3). Af_07/2020, Transport With Truck Body With Crane (Munck), Maximum Loading Moment 11. 7 Tm, On Paved Urban Road, Dmt Up To 30Km (Unit: Txkm). Af_07/2020, Conventional Lease Of Work, Using Template Of Pointed Running Boards Every 2.00M - 2 Uses. Af_10/2018, Mechanically Excavated Pile, Without Stabilizing Fluid, 40Cm In Diameter, Concrete Cast By Concrete Mixer Truck (Excluding Mobilization And Demobilization). Af_01/2020_Pa, Test - Physical Integrity Of Pile - Pit One, Grade Fgk=15 Mpa; Mixture 1:0, 04:2, 2:2, 5 (In Dry Mass Of Cement/Lime/Coarse Sand/Gravel 0) - Mechanical Preparation With 400 L Concrete Mixer. Af_09/2021, Mechanized Trench Backfill With Backhoe Loader (Capacity Of Retro Bucket: 0.26 M³ / Power: 88 Hp), Width Up To 0.8 M, Depth Up To 1.5 M, With 1St Category Soil (Without Replacement) In Locations With High Level Of Interference. Af_04/2016, Mechanized Excavation For Crowning Block Or Footing With Backhoe Loader (Including Excavation For Placing Formwork). Af_06/2017, Manufacture, Assembly And Disassembly Of Formwork For Crowning Block, Made Of Resin Plywood Sheet, E=17 Mm, 4 Uses. Af_06/2017, Block Frame, Baldrame Beam Or Footing Using 8 Mm Ca-50 Steel - Assembly. Af_06/2017, Baldrame Beam Or Shoe Using 10 Mm Ca-50 Steel - Assembly. Af_06/2017, Baldrame Beam Or Shoe Using 12.5 Mm Ca-50 Steel - Assembly. Af_06/2017, Baldrame Beam Or Shoe Using 16 Mm Ca-50 Steel - Assembly. Af_06/2017, Concreting, Fck=40 Mpa - Placing, Thickening And Finishing, Lean Concrete Ballast, Applied To Crowning Blocks Or Footings. Af_08/2017, Chartered Neoprene Support Device For Precast Structures - Supply And Installation, Assembly And Disassembly Of Formwork For Rectangular Pillars And Similar Structures, Double Right Foot, 6 Uses. Af_09/2020, Pillar Or Beam Frame Of Conventional Reinforced Concrete Structure Using 6.3 Mm Ca-50 Steel - Assembly. Af_06/2022, Pillar Or Beam Frame Of Conventional Reinforced Concrete Structure Using 8.0 Mm Ca-50 Steel - Assembly. Af_06/2022, Pillar Or Beam Frame Of Conventional Reinforced Concrete Structure Using 10 Ca-50 Steel, Pillar Or Beam Frame Of Conventional Reinforced Concrete Structure Using Ca-50 16 Steel, Pillar Or Beam Frame Of Conventional Structure D
