Tall Cabinet Shelves (0.80 X 0.50; H=1.35) M Cabinet, Tall, Closed, Dimensions Of 800 Cabinet And 03 Shelves Of Adjustable Height Supported By Steel Pins. Made Of Agglomerated Wood Fiber (Mdp) With A Minimum Thickness Of 18 Mm, With A Top Top With A Thickness Of 25 Mm Overlapping The Doors, Fully Coated On The Internal And External Sides With Bp Melamine In Clay Gray; Edge Finishing In Flat Pvc Profile Approximately 2 Mm Thick In The Same Color As The Laminate. Base With Level Adjusting Shoes, In Polypropylene, With Adjustment On The Inside Of The Cabinet (Thus Avoiding The Need To Lift The Cabinet To Adjust The Height), Or In Tubular Steel With At Least 20 X 50 Mm Painted In Epoxy-Po, With Leveling Shoes For Adjusting The Level Of Hinges Made Of Injected Zamak With A Minimum Opening Of 110º And Millimeter Adjustment For Adjusting The Gaps And Aligning The Doors With A Pressing Device To Keep The Doors Closed. Lock, In Metal Alloy, With 2 Folding Keys. Two Handles, Metallic, Chrome Finish, Positioned Vertically On The Top Of The Cabinet. The Product Must Comply With Nr17, Proven Through An Ergonomics Report, And Abnt Standard Nbr 13961:2010, Proven Through An Abnt Product Conformity Certificate (Complete With Cover And Attachments), And The Certificate Must Contain The... , Low Shelf Cabinet (0.50; H=0.74) Cabinet, Low, Dimensions Of 800 Adjustable Height Supported By Steel Pins. Made From Particleboard Fiberboard (Mdp) With A Minimum Thickness Of 18 Mm, With Leveling Shoes For Level Adjustment. Hinges Made Of Injected Zamak With A Minimum Opening Of 110º And Millimeter Adjustment For Adjusting Gaps And Aligning The Doors With A Pressing Device To Keep The Doors Closed. Lock, Positioned Vertically On Top Of Cabinet. The Product Must Comply With Nr17, Proven Through An Ergonomics Report, And Must Appear On The Certificate..., “L” Shaped Workstation Without Drawer And Without Cpu Holder (1.35 Service With L-Shaped Surface, Dimensions Of 1350 And Metal Bushings Embedded In The Wood, Fully Covered In Low-Pressure Textured Melamine Laminate, In Clay Gray Color, Edge In Extruded Pvc In The Color Of The Laminate With A Contact Radius With The User Of At Least 2.5 Mm, Meeting Current Abnt Standards . The Top Must Have 2 Holes, One On Each Side, 60 Mm In Diameter For The Wiring To Pass Through, With A Hole Cover Made Of Nylon, Polypropylene, Polystyrene Or Polyester. Front Panel Made Of Thermo-Stabilized Wood With A Minimum Of 18 Mm Thickness, Covered In Low Pressure Textured Melamine Laminate, Bottom, Top And Side Edges Must Be Finished In Pvc Profile, Glued Using The Hot Melt Process In The Color Of The Laminate, The Panel Must Be Fixed Between Structure Pieces Using The Minifix/Rotofix System. This Panel Must Be 180 Mm From The Rear Edge Of The Top. Side Structures, Under The Super