Bids Are Invited For Hiring A Company To Carry Out Reconstruction Work On The Retaining Wall On Rua Manoel Leite Pinho And The Rainwater Drainage System And Reconstruction Of The Drainage System On Rua Porfírio Ferreira Neto, In Accordance With The Specifications Contained In The Attached Engineering Documents, In Meeting The Needs Of The Municipal Secretariat For Economic And Sustainable Development Of Recreio-Mg.

1.1.1 Supply And Placement Of Work Sign Made Of Galvanized Sheet 26, Esp. 0.45Mm, Dimension (3X1.5)M, Plotted With Vinyl Adhesive, Affixed With 4.8X40mm Rivets, On 20X20mm Metal Structure, Special. 1, 25Mm, Including Support In Autoclaved Eucalyptus Painted With Pva Paint Two (2) Coats, 1.1.2 Mechanized Excavation Of Trench With Prof. Greater Than 3.0 M Up To 4.5 M(Average Upstream And Downstream/One Composition Per Section), Excavator (0.8 M3), Width. Less Than 1.5 M, On 1St Category Soil, In Places With A High Level Of Interference. Af_02/2021, 1.1.3 Trench Shoring, Continuous Type, With Depth From 0 To 1, Width Greater Or Equal To 1.5 M And Less Than 2.5 M. Af_08/2020, 1.1.4 Manufacture Of Formwork For Columns And Similar Structures, Made Of Resin Plywood Sheet, And 17 Mm. Af_09/2020, 1.1.5 Concreting Of Buildings (Walls And Slabs) Made With A Handleable Formwork System, With Self-Compacting Machined Concrete Fck 25 Mpa - Laying And Finishing. Af_10/2021, 1.1.6 Cutting And Bending Of Ca-50 Steel, Diameter Of 6.3 Mm. Af_06/2022, 1.1.7 Cutting And Bending Of Ca-50 Steel, Diameter Of 8.0 Mm. Af_06/2022, 1.1.8 Cutting And Bending Of Ca-50 Steel, Diameter Of 10, 1.1.9 Cutting And Bending Of Ca-50 Steel, Diameter Of 12.5 Mm. Af_06/2022, 1.1.10 Cutting And Bending Of Ca-50 Steel, Diameter Of 16, 1.1.11 Surface Waterproofing With Polymer Mortar / Acrylic Membrane, 3 Coats. Af_09/2023, 1.1.12 Mechanized Trench Backfilling With Hydraulic Excavator (Bucket Capacity: 0.8 M³/Power: 111 Hp), Width From 1.5 To 2, Depth From 3.0 To 6.0 M, With 1St Category Soil (Without Replacement), With Vibrating Plate. Af_08/2023, 1.1.13 Subsurface Drain (Section 0.40 Af_07/2021, 1.1.14 Sand Filling For Drain, Mechanized Launching. Af_07/2021, 1.1.15 Filling Of Crushed Stone For Drain, 1.1.16 1.10M Galvanized Steel Railing, 1.1/4M Tubular Uprights Spaced 1.20M, 1.1/2 Upper Crossbar, Grating Formed By 1 Horizontal And 3/4 Vertical Tubes, Fixed With Mechanical Anchor. Af_04/2019_Ps, 1.1.17 Pre-Cast Concrete Half-Cane Channel (D 30 Cm) - Supply And Installation. Af_08/2021, 1.2.1 Resettlement Of Hexagonal Blocks For Interlocking Flooring, 8 Cm Thick, On The Road/Parking Lot, With Reuse Of The Hexagonal Blocks - Including Removal And Placement Of Material. Af_12/2020, 1.2.2 Mechanized Trench Excavation With Prof. Up To 1.5 M (Average Upstream And Downstream/One Composition Per Section), 1.2.3 Manual Trench Backfilling, With Percussion Soil Compactor. Af_08/2023, 1.2.4 Lean Concrete For Ballast, Mixture 1:4, 5:4, 5 (In Dry Mass Of Cement/Medium Sand/Gravel 1) - Mechanical Preparation With Concrete Mixer 400 L. Af_05/2021, 1.2.5 Concrete Pipe For Rainwater Collection Networks, 500 Mm Diameter, Rigid Joint, Installed In A Location With Low Level Of Interference - Supply And Installation. Af_12/2015, 1.2.6 Box With Simple Rectangular Grid, In Masonry With Concrete Blocks, Internal Dimensions: 0.5X1x1 M. Af_12/2020, 1.2.7 Execution Of Flooring In Interlocking Floor, With Hexagonal Block Of 25X 25 Cm, Thickness 8 Cm. Af_10/2022, 1.2.8 Guide Laying (Curb) In Straight Section, Made Of Prefabricated Concrete, Dimensions 100X15x13x20 Cm (Length X Lower Base X Upper Base X Height), For Internal Urbanization Of Developments. Af_06/2016, 1.2.9 Execution Of Concrete Gutter Plant