Bids Are Invited For Price Registration For Future Acquisition And Installments Of Led Luminaires And Materials For Maintenance Of Public Lighting Points In The Municipality Of Porangaba, According To The Quantities And Descriptions Contained In Annex I - Terms Of Reference.

Led Luminaire 60 To 70W. - Led Luminaire 60 A 70W. Polyester-Based Electrostatic Powder Painting In White (Ral: 9016) Or Gray (Ral: 9007) With Uv Protection; Aluminum Sheet Body With A Minimum Thickness Of 2.0 Mm, Or Extruded Aluminum Body Or High-Pressure Injected Aluminum Body; 4Mm Polycarbonate, Silicone Or Glass Refractor; Glass Refractor Case: Polycarbonate Or Ppma Lens; Supply Voltage 220V (+/- 10%); Luminaire With Driver 220V Voltage Range, Base And 3-Pin Photoelectric Relay Or Built-In Photocell; Total Luminous Efficacy Min. 119 Lm/W; Identification Of The Luminaire And Power Must Be Indelibly Engraved On The Body Of The Luminaire, The Brand And Model Of The Equipment; Color Rendering Index (Irc) Minimum 70%; Stainless Steel Fastening Elements; Operating Temperature Range, In The Range Of -40 To +45ºc, Or Higher; Maintenance Of Luminous Flux With At Least 70% After 50,000 Hours (L70 According To Iesna Lm-80 And Calculation Of Tm-21); Degree Of Protection Ip 66 Or Higher; Minimum Mechanical Resistance = ≫Ik08; Led Module Smd (Surface Mounted Device) Or Cob (Chips On Board); Installation Of The Luminaire At The End Of An Arm With A Diameter Of 48 To 60.3 Mm; Color Temperature = 4500K To 5500K; Total Harmonic Distortion (Thd) Maximum 10%; Surge Protection Of 10Kv/10Ka Or Higher; Minimum 5-Year Warranty; Minimum Power Factor 0.98; Photometric Classification, Transverse Type Ii, Light Control Limited Type (Cut-Off) Or Totally Limited (Full Cut-Off), According To Nbr-5101/2012; Minimum Lifespan Of 50,000 Hours For The Luminaire/Driver Assembly; The Products Offered Must Meet The Technical Description Above And Together With The Commercial Proposal The Reports, Certificates And Tests Detailed Below Must Be Presented, Under Penalty Of Disqualification., Photoelectric Relay. - Photoelectric Relay. Bivolt Voltage, With Base, Connection Using Abnt/Nbr 5123 Standard Connector; Power 1000W, Frequency 50/60Hz, Operating Temperature -5 To 50ºc; Dimensions 78.7Mm X 43.5Mm (Wx) Approximately; In Polypropylene, Must Be Delivered Accompanied By Socket With Metal Support; With 12 Month Warranty., Auxiliary Relay Three Contacts. - Auxiliary Relay Three Contacts. Nominal Coil Voltage 24 Vdc; Resistance 475 Ohms, Maximum Switching Voltage 250 Vac; Three Reversible Nickel Silver Contacts For 10 A Rated Current; Circular Base With Eleven Pin Type Terminals For Fitting; Plastic Protective Cover; Width 35 Mm, Height 64.5 Mm, Base For Power Relay. - Base For Power Relay. 3 Reversible Contacts, With 8 Terminals For Io Soldering; Rated Current 3A; Nominal Voltage 250V, 48Vdc Coil, Connection Connector. - Connection Connector. Polymer; For Perforating Derivation Type, In Overhead Distribution Networks; With Low Voltage Up To 1Kv; For Main Conductor: 10 To 95Mm2; In Accordance With Current Nbr/Abnt.