Bids Are Invited For The Purpose Of This Tender Is The Acquisition Of Office Furniture And Leisure Furniture, In Accordance With The Specifications Contained In This Notice And Its Annexes.

Steel Cabinet, 2 Doors/4 Shelves Tall Steel Cabinet, Divided Vertically Into Two Compartments By Means Of Dividers With Independent Doors, Equipped With Four Removable And Adjustable Shelves In Each Compartment. Dimensions And Tolerances - Width: 900 Mm +/- 10 Mm - Depth: 400 Mm +/- 10 Mm - Height: 1980 Mm +/- 10 Mm - Tolerances For Paint Layer: Minimum 40 Micrometers / Maximum 100 Micrometers. Features: - Body, Partitions And Doors In Cold Rolled Steel Sheet - Sheet 22 (0.75 Mm). - Shelves And Door Reinforcement In Cold Rolled Steel Sheet - Sheet 20 (0.90 Mm). - Base In Cold Rolled Steel Sheet - Plate 18 (1.25 Mm). - Door Locking Bars Ø = 1/4 (Minimum). - Internal Hinges Not Visible On The Exterior Of The Furniture Made Of Cold-Rolled Steel Plate - 14 Plate (1.9 Mm) With A Minimum Of 75 Mm In Height - Three Units Per Door. - Entirely Metal Handle And Canopy, With Cremona System Locking. - Tamb Lock, Upholstered Fixed Chair, Steel Tubular Frame With 4 Feet Upholstered Fixed Chair, Armless, Mounted On A Steel Tubular Frame With Four Feet. Dimensions And Tolerances: - Seat Width: 500 Mm +/- 50 Mm - Seat Depth: 460 Mm +/- 10 Mm - Seat Height: 430 Mm +/- 10 Mm - Backrest Width: 400 Mm +/- 10 Mm (Measured At The Most Prominent Point Of The Lumbar Support) - Vertical Extension Of The Backrest: 350 Mm +/- 10 Mm - Thickness Of The Seat Foam: Minimum Of 40 Mm - Thickness Of The Backrest Foam: Minimum Of 30 Mm. - Dimensional Tolerances For Tubes According To Abnt Nbr 6591. - Tolerances For Paint Layer: Minimum 40 Micrometers / Maximum 100 Micrometers. Features: - Seat And Back Made Of Hot-Molded Anatomical Plywood, Containing At Least Seven Internal Sheets, With A Maximum Thickness Of 1.5 Mm Each. - Upholstery Of The Seat And Back In Expanded Polyurethane Foam, Glued To Wood And Covered With Fabric, In Gray Color, Equipped With Protection, Upholstered Swivel Chair With Armrests And Castor Upholstered Swivel Chair With Armrests And Casters, Equipped With Damper And Regulating Mechanism Of Seat And Backrest. Dimensions And Tolerances: Seat Width: 500 Mm +/- 50 Mm - Seat Depth: 460 Mm +/- 10 Mm - Variable Seat Height: Mandatory Range Between 420 Mm And 520 Mm - Backrest Width: 400 Mm +/ - 10 Mm (Measured At The Most Prominent Point Of The Lumbar Support) - Vertical Extension Of The Backrest: 350 Mm +/- 10 Mm - Seat Foam Thickness: Minimum 40 Mm - Backrest Foam Thickness: Minimum 30 Mm - Tolerances Dimensions For Tubes According To Abnt Nbr 6591 - Tolerances For Paint Layer: Minimum 40 Micrometers / Maximum 100 Micrometers. Features: Seat And Back Made Of Hot-Molded Anatomical Plywood, 5Mm Each. - Upholstery Of The Seat And Back In Expanded Polyurethane Foam, Glued To The Wood And Reve, Button Football Table Button Football Table. Button Football Table With Foldable Steel Tube Feet And Epoxy Electrostatic Painting. It Has Edges Covered In Flexible Plastic To Protect The Buttons. Field 15 Mm Thick With Uv Painting. Features Tracks On The Field In Two Tones Of Green In European Style. Technical Information 15 Mm Particleboard Material With Flexible Plastic Edges. Number Of Players Up To 2 Folding Yes Folding Feet. Approximate Weight Product Weight 13 Kg. Product Weight With Packaging 15 Kg. Approximate Product Dimensions (W X L): 122