Outdoor Portable Sports Flexible Flooring, Measures Between 250 Mm To 304 Mm Width X 250 Mm To 304 Mm Length (Uv), Reducing By Up To 50% The Heat Reflection Caused By Solar Rays And Colored Pigments With High Solar Incidence, Protecting Against Color Loss (Fading); Anti-Slip Technology, Aids Traction And Sports Performance; Micro Perforated Plate, Provides High Sound Absorption During Sports Practice And Helps With Liquid Drainage. With Cushioning Technology Using Tpe Thermoplastic Rubber Cylindrical Pins, Which Meets Astm D 2240, Astm D 412 And Astm D 792 Standards, With A Minimum Of 352 Pins Required And Allowing A Maximum Of 512 Tpe Thermoplastic Rubber Cylindrical Pins Per Square Meter For Cushioning, For Perfect Fit And Flexibility, With High Impact Absorption, Protecting Joints From Injuries. Assembly Using A Male And Female Fitting System For A Perfect Finish, With An Expansion Joint, Which Maintains The Integrity Of The Leveling In Any Climate. Anti-Theft System For Signs Using Hidden Screws, With A Minimum Of 2(Two) And A Maximum Of 4(Four) Per Sign, Preventing The Removal Of Signs In Public Areas. Structural Base With Technology For Water Drainage And Air Circulation, Reducing Water Pooling And Moisture Retention On The Subfloor., Side Ramp – Side Finish, For External And Internal Modular Sports Flooring, The Ramp Must Be Made Of High-Grade Polypropylene -Impact With Antioxidant (Ao) And Ultraviolet (Uv) Additives, With Damping System Using Tpe Rubber Pin, Containing At Minimum 8(Eight) Damping Pins Duly Coupled In The Structure, With A Width Of Minimum 30Mm To A Maximum 50Mm, The Length Must Be Compatible With Item 1 (Floor)., 90º Angle, Made Of High-Impact Polypropylene With Antioxidant (Ao) And Ultraviolet (Uv) Additives, Damping System Through Tpe Rubber Pin, Containing At Least 02 ( Two) Damping Pins., Wall Skirting Board Placed On The Modular Floor In Polypropylene Plastic With Additives (Uv) And Its Function On The Modular Floor Is To Cover The Existing Gap Between The Ends Of The Modular Floor And The Wall, Allowing Natural Movement Of The Expansion And Contraction Of The Modular Floor, For A Better Visual Result And To Avoid The Accumulation Of Dirt Between The Wall And Floor, Also Avoiding Access To The Lateral Ends Of The Floors, Protecting From Inappropriate Dismantling Measurements 250 Mm To 304 Mm Width 50 Mm To 70 Mm, With A Fixing System Using Hidden Screws Fixed With Plugs In The Walls, At Least 02 (Two) And Maximum 03 (Three), With A Male And Female Fitting Between The Pieces, Coupling One Piece To Another, With A Minimum Of 40 Mm And A Maximum Of 60 Mm In Length And With 9Mm To 20Mm Wide To Provide Stability In Fitting, The Product Must Be Compatible With Modular Flooring.
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
