Bids Are Invited For Hiring An Engineering Company To Execute The Structural Reinforcement Work Of The Reporting Wall Of The Manoel Fulgêncio Municipal School.

Supply And Installation Of Construction Plate With Galvanized Sheet And Wooden Structure, Conventional Construction Location, Using A Template Of Running Boards With Points Every 2.00M Conventional Construction Location, 00M - 2 Uses. Af_10/2018, Construction Shed, Made Of Resin Plywood, Including Sanitary Facilities And Furniture Water Measuring Easel Temporary Water Connection For Site, Including Hydrometer And Water Measuring Easel - Main Entrance, In Galvanized Steel Dn 20Mm (1/2) - Dealership Standard, Sewer Connection For Construction Shed On Site, Excluding Septic Tank Septic, Temporary Connection With Air Power Input, Cemig Standard, Installed Load From 15, 1Kva To 30Kva Temporary Connection With Air Power Input, 1Kva Up To 30Kva, Three-Phase, With Underground Output, Including Pole, Meter Box, Circuit Breaker, Busbar, Grounding And Accessories, Wood Propping For Structure Support, Supply Of Tower Type Tubular Metal Scaffolding (Rental), Including Casters Tower, Exclusive Supply Of Scaffolding, Manual Excavation For Crowning Block Or Footing (Including Excavation For Placing Formwork), Manual Excavation Of Trench For Baldrame Beam (Including Excavation For Placing Formwork), Manual Piping On Trench Bottom With Socket, Exclusive Excavation, Lean Concrete For Ballast, Mixture 1:4, 5:4, 5 (In Dry Mass Of Cement/Medium Sand/Gravel 1) Lean Concrete For Ballast, 5 (In Dry Mass Of Cement/Medium Sand/Gravel 1) - Mechanical Preparation With Concrete Mixer 400 L., Macro Concrete For Ballast, Section 1:4, 5:(In Dry Mass Of Cement/Medium Sand/Gravel 1) Mechan Preparation Macro Concrete For Ballast, 5:(In Dry Mass Of Cement/Sand Medium/Grit 1) Mechanical Preparation With 400L Concrete Mixer Af 05/2021, Formwork And Shaping For Belt Beam/Block With Board And Batten, Reuse (3X) (Foundation), Cutting And Bending Of Ca-60 Steel, Diameter Of 5, 0Mm, Ca-50 Steel Cutting And Bending, Diameter 6.3Mm, Diameter 8, Diameter 10, Diameter 12.5Mm, Diameter 16, Concrete Fck 30Mpa, Ratio 1:2, 1:2 , 5 (In Dry Mass Of Cement/Medium Sand/Gravel 1) Concrete Fck 30Mpa, 5 (In Dry Mass Of Cement/Medium Sand/Gravel 1) - Mechanical Preparation With 400 L Concrete Mixer, Manual Trench Backfill, Including Spreading And Compaction Manual With Socket, Surface Waterproofing With Asphalt Emulsion, 2 Coats, Assembly And Disassembly Of Formwork For Rectangular Pillars And Similar Structures, Simple Right Foot Assembly And Disassembly Of Formwork For Rectangular Pillars And Similar Structures, Simple Right Foot, In Sheet Metal Resin Plywood, 2 Uses., Af 06/2022 Cutting And Bending Of Ca-60 Steel, Af 06/2022, Af 06/2022 Cutting And Bending Of Ca-50 Steel, 5 (In Dry Mass Of Cement/Medium Sand/ Brita 1) - Mec Concrete Preparation Fck 30Mpa, 5 (In Dry Cement Mass/Medium Sand/Gravel 1) - Mechanical Preparation With Concrete Mixer 400 L. Af_05/2021, Single Right Foot. Assembly And Disassembly Of Formwork For Rectangular Columns And Similar Structures, 2 Uses. Af_09/2020, 0 Mm. Cutting And Bending Of Ca-60 Steel, 0 Mm. Af_06/2022, 0 Mm. Ca-50 Steel Cutting And Bending, 0 Mm., Di