Carpentry Installation Work – Zimmererarbeiten. Construction Work Is Required For The New Construction Of The Depot For The Cultural Property Collection Of The Oberschönenfeld Museum: Carpentry Work And Assembly Planning: Workshop Planning And Statics In Verifiable Form Of The Wooden And Steel Structures (A Pre-Dimensioning Of The Steel Substructure, Wooden Cladding, External Wall, Ground Floor Has Already Been Carried Out By The Structural Planner). Workshop, Detail And Execution Drawing, With Evidence Of Heat And Sound Insulation In Accordance With Din 4109 Enclosure Staircase Room-Side Scaffolding 6.5 X 3.5M, Working Height 4.5-8.0M 23 M2 Protective Net Din En 1263-1 Dguv Rule 101- 011 Prov. Daytime Waterproof Cover For Ceiling Opening Including Provision Prov. Door With Block Frame, 1-Leaf. In Wooden Construction, Deliver Lumber, Tie It, Lay/Set Up, Wood Type Spruce/Fir, Cross Section 18/6Cm - 18/14Cm In Total Approx. 3.6M3 Of Glulam Spruce Deliver, Lay/Set Up, 0.9M3, 14 X 36 X 700Cm Interior Wall And Ceiling Cladding Made Of Osb Layer Sequence D = 15Mm - 18Mm, Thermal Insulation Layer Between Rafters Miwo Wls 0032, Wood Fiber Insulation Board D = 40Mm, Roof Boarding Made Of Edged Boards, Area Approx. 35M2 Wooden Cladding With Substructure For Rear-Ventilated Facade, D = Up To 48Cm In Part From The Base And Supporting Battens, External Wall Cladding Larch (European) Board Width 8-14Cm, Quality Class 1, D=24Mm, Approx. 80M2 Seating Area 40.5X 482Cm, D=40Mm, Solid Larch Wood, Quality Class 1, Planed On All Sides, Wood Cladding On The Room Side, Larch, Gkl. 1, Visible Surfaces Planed, 62M2 On Uk 1 Piece External Door Element, 1 Leaf. With Outward Opening Rebate, As An Escape Door, 1135 X 2165Mm, Surrounding Frame Wood Type Larch Wood Cladding External Wall Ground Floor Squared Timber Larch, Gkl. 1, L = 154-596.5Cm, Cross Section 70 X 180Mm, 2380M, On Steel Uk (Upe 80) And Anchoring On On-Site Concrete Anchor Rail. Substructures Including Fittings, For Opening Sash Shutters, 1 Leaf, W X H: 990 X 2700Mm Steel Substructure For 2 Leafs. Door With Symmetrical Leaf Pitch Including Fittings, Dim. Wing 990 X 3250Mm Steel Substructure For 2 Sashes. Door With Symmetrical Leaf Pitch Including Fittings, Dim. Wing 990 X 3890Mm Steel Substructure For 2 Sashes. Door With Asymmetrical Leaf Division Including Fittings, Dim. Wing 990 X 3250Mm, 1905 X 3250Mm Steel Substructure For 1 Leaf. Door Swing Leaf Including Fittings, W X H: 990 X 4890 Mm Steel Substructure For 1-Leaf Sliding Gate Composed Of 3 X Frames Each W X H 1720 X 4000Mm Parapet Cover With Cover Plate, Aluminum Sheet Folded 4 Times D = 3Mm Concealed Installation On Squared Timber.
