The Pipe Is Electric Welded, Straight-Seam, Steel, Steel 20, Outer Diameter 114 Mm, Wall Thickness 4.5 Mm. Pipe Production No Earlier Than 2024. For The Shipped Pipes, The Supplier Is Obliged To Provide A Quality Document (Certificate) Certifying The Compliance Of The Pipes With The Requirements Of Gost, Specifying: - The Nominal Size Of The Pipes - The Steel Brand Or Its Conventional Designation - The Enterprise-Manufacturer Of The Pipes, The Numbers Of The Technical Conditions According To Which The Pipes Are Made, The Numbers Of The Welds Or Batches And The Numbers Of The Pipes Included In Them, The Results Of Mechanical Tests Of The Base Metal And The Welded Joint, The Chemical Composition Of The Steel According To The Data Of The Enterprise, The Supplier Of The Metal Or According To The Analysis Of The Factory Of The Supplier Of The Pipes. The Pipes Must Be Of The Same Size, Of The Same Grade Of Steel And Of The Same Manufacturing Group And Accompanied By One Quality Document According To Gost 10705-80 Or 10704-91. Cracks, Traps, Shells, Delaminations And Dips On The Surface Of The Pipes Are Not Allowed. , Dents, Small Lines, A Thin Layer Of Scale, Traces Of Cleaning And Welding Defects Are Not Allowed. Surface Defects Of The Weld Metal In The Form Of Pores, Shells, Cracks, Fistulas And Other Defects That Reduce The Density And Strength Of The Weld Metal Below The Level Of The Base Metal Are Not Allowed. The Pipe Must Be New.
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.