Bids Are Invited For Equipment And Permanent Material, Acquisition Of Furniture For The Lego Room Vera Lucia Soares Franco From Escola Municipal Dona Lourdes Ladeira, In Service Of The Municipal Secretariat Of Education

Bench Type Table, Lego Room Measurements: 150Cm (Width) X 77Cm (Depth) , 5Mm (±0, 15Mm), Top Crossbar In Nbr1010 Carbon Steel Tube With Rectangular Section 20X40(±0, 2)Mm With Wall Of 1.2Mm (±0, Folded Carbon Steel Plate Nbr1010 With Thickness Of 1.15Mm) For Fixing The Main Crossbeams, Top Fixing Plate On The Metallic Structure In Carbon Steel Nbr1010 With Thickness Of 1.9Mm Main Beam Material: Cross Beam For Fixing The Sides And Fixing The Top Fixing Plate To The Metal Structure In Carbon Steel Tube Nbr1010 20Mm X 40Mm (±0.2Mm) With A Thickness Of 1.2Mm, Cross Beam For Foot Support In Carbon Steel Tube Nbr1010 40Mm Ensure Resistance To Corrosion In A Salt Spray Chamber For At Least 300 Hours (Degreasing And Nanotechnology Process Using Fluorzirconium, Which Guarantee Great Mechanical Resistance And An Excellent Finish) Painting: Hybrid Electrostatic Epoxy/Polyester Powder With Polymerization In An Oven, Has An Antimicrobial Agent And Free From Heavy Metals, With A Minimum Film Of 60 Microns Tips: External Tip Measuring 49Xø56(±1)Mm And A Thickness At The Base Of The Tip Of 4(±0, 5)Mm Frieze Umaterial: Rigid Pvc, Fixed To The Footrest By Rivets The Rivets Are Made Of Extruded Aluminum, Not Visible On The Surface (Body) Ø4, 9(±1) Mm Made Of Mdp Ultra (Moisture Resistant) 18 (±0.5) Mm Thick With Melamine Finish On The Bottom And Laminate Application, Stool, Lego Room Measurement: 55 Cm In Heightstructure Material: Feet In Carbon Steel Tubes Nbr1010 Section Round Ø 22.2Mm(±0.5Mm(±0.1Mm), Carbon Steel Rim Nbr1010 Round Section Ø19.05Mm(±0.1Mm) Tube Forming Process: Cold Forming Free Of Crumpling And Visible Wrinkles System Welding: Spatter-Free Mig, Treatment: Anti-Rust That Ensures Resistance To Corrosion In A Salt Spray Chamber And A Humid Chamber For At Least 500 Hours And A Chamber With Exposure To Sulfur Dioxide For A Minimum Of 4 Cycles (Degreasing And Surface Treatment Process Metallic With Nanotechnology, With Minimum Film Of 100 Microns Tips: High Tip Made Of High Density Polyethylene With Noise Reduction, Externally Measuring Ø28mmx45mm With A Thickness Of 8Mm At The Point Of Contact Of The Tube With The Floor Tolerance 5% Construction: All Corners Rounded No Burrs Or Sharp Parts Seat Material: High Impact Resistant Virgin Polypropylene Material Free Of Heavy Metals Fastening To The Structure: Seat Fixed To The Structure By Means Of 4 Rivets Each In Extruded Cast Aluminum Not Apparent On The Surface Ø4.9Mm (Body) X Ø9mm (Head) Tolerance ±1Mm Seat Dimensions: Ø360mm, Height 35(±3)Mm Minimum Thickness Of 4(±0.5)Mm Ergonomics: Seat Has An Ergonomic Contact Surface Finish: Rounded Corners Without Burrs Contact Surface With Textured Finish Preventing Sliding Warranty: Mini