Bids Are Invited For Selection Of The Best Proposals For Price Registration, For Eventual And Future Hiring Of A Company To Supply School Furniture, Aiming To Meet The Needs Of The Department Of Education Of The Municipality Of Morro Do Chapéu-Bahia.
Bids Are Invited For Selection Of The Best Proposals For Price Registration, For Eventual And Future Hiring Of A Company To Supply School Furniture, Aiming To Meet The Needs Of The Department Of Education Of The Municipality Of Morro Do Chapéu-Bahia.
Adult Student Set Cja 06 B (11 To 17 Years) Composed Of: Two Independent Elements - (1) Table And (1) Chair. Table Made Of Thermoplastic Resin, Manufactured Using Thermoplastic Injection Process; Abs Top With Rectangular Shape Measuring At Minimum 760Mm X 600Mm X 450Mm And Bottom, Fixed To The Lower Part Of The Top, For Better Ventilation, It Must Contain A Minimum Of 34 And A Maximum Of 38 Holes. Structure Made Of Industrial Steel In Square Tubes Formed By A Mechanical Forming Process By Bending, Measuring, Base Of The Top By Two Tubes Measuring Approximately 20Mm With At Least 1.2Mm Thick, It Must Contain The Brand On The Backrest In High Relief. Table Base Formed By Two Oblong Tubes Measuring Approximately 30Mm X 50Mm With A Minimum Thickness Of 1.2 Mm, Interconnected By A 20Mm X 30Mm Metalon Tube. Non-Slip Shoes Partially Surrounding The End Of The Tubes That Make Up The Feet, Formed By 29Mm X 58Mm Metalon Tubes, Performing The Paint Protection Function, Increasing Durability, Made Of Virgin Polypropylene, In The Same Color As The Top And Attached Structure. Chair With Seat And Back In Virgin Plastic Resin, Manufactured Using The Thermoplastic Injection Process. Flat Seat Measuring Approximately 410Mm X 400Mm. Backrest With Anatomical Curvature Measuring Approximately 410Mm X 245Mm, Minimum Thickness 5Mm. Seat Base And Connection To The Back Formed By Tubes Measuring Approximately 25Mm X 25Mm With Ergonomic Curvature For Accommodation. Base For Interconnecting The Feet In Tubes Measuring At Least 7/8” With At Least 1, Column Of Feet Formed By 20Mm X 50Mm Metalon Tubes And The Feet Formed By Two 30Mm X 50Mm Metalon Tubes. The Entire Metal Structure Is Made Of Tube, Youth Student Set Cja 04 B (06 To 10 Years) Composed Of: Two Independent Elements - (1) Table And (1) Chair. Table Made Of Thermoplastic Resin, Manufactured Using Thermoplastic Injection Process; Abs Top With Rectangular Shape Measuring At Minimum 750Mm X 600Mm X 450Mm Structure Made Of Industrial Steel In Square Tubes Formed By Mechanical Forming Process By Bending Measuring, Column Of Feet Formed By 20Mm X 50Mm Metalon Tubes And The Feet Formed By Two Metalon Tubes 30Mm The Entire Metal Structure Is Made Of Industrial Steel Tubes Treated With Sets Of Chemical Baths For Protection. Student Set Table: Table Made Of Thermoplastic Resin, 2Mm Thick. Tables, 06 Chairs And 01 Central Table. Trapezoid-Shaped Table, Allowing The Formation Of Circles With 06 (Six) Tables; Table Top Made Of Abs Thermoplastic Resin Measuring Approximately 660Mm X 240Mm X 440Mm. Table Structure Formed By Side Columns In Industrial Steel Tube Measuring Approximately 20Mmx50mm Joining The Base Structure Of The Top To The Feet With A Thickness Of Approximately 1.2Mm. Non-Slip Shoes Partially Involving The End Of The Tubes That Make Up The Feet, Manufactured Using The Thermoplastic Injection Process. Seat Measuring Approximately
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
