Bids Are Invited For Price Registration For The Acquisition Of Centrifugal Pumps To Be Used In The Raw Water Catching System In Ribeirão Baixotes And Other Pumping Sectors - Environmental Secretariat, According To The Specifications In Annex I.
Bids Are Invited For Price Registration For The Acquisition Of Centrifugal Pumps To Be Used In The Raw Water Catching System In Ribeirão Baixotes And Other Pumping Sectors - Environmental Secretariat, According To The Specifications In Annex I.
Horizontal Shaft Centrifugal Type Pump For Raw Water Boosting, Temperature Of 25°C, Free Shaft, Bearing, Flow Of 500 M³/Hour And Total Manometric Height Of 95.00 Mca, Built In Cast Iron, Sealed By Puro Gasket Graphite, Flanged Nozzles With 200 Mm Suction And 150 Mm Discharge, Efficiency Above 75%, Closed Impeller With 480 Mm Diameter, Rotation Of 1,780 Rpm, Coupled Through Elastic Coupling, With Sheet Coupling Protector.Pump Dimensions:- Total Length: 1,040.00 Mm- Total Width: 686.00 Mm- Distance Between The Holes Of The Feet In The Longitudinal Direction: 693.00 Mm- Distance Between The Holes Of The Front Feet In The Transverse Direction: 560.00 Mm- Distance Between The Rear Foot Holes In The Transverse Direction: 335.00 Mm - Distance Between The Tip Of The Suction Flange And The Axis Of The Discharge Flange In The Longitudinal Direction: 170.00 Mm - Distance Between The Axis Of The Suction Flange And The Axis Of The Flange Of Pressure In The Transverse Direction: 0.00 Mm - Total Height In Relation To The Base Of The Feet: 925.00 Mm - Height Of The Shaft In Relation To The Base Of The Feet: 400.00 Mm, Flow Rate Of 500 M³/Hour And Total Manometric Height 98, Coupled Via Elastic Coupling, With Sheet Metal Coupling Protector. Pump Dimensions: - Total Length: 1,030.00 Mm - Distance Between The Holes In The Feet In The Longitudinal Direction: 508. 00 Mm - Distance Between The Holes In The Front Feet In The Transverse Direction: 530. 00 Mm - Distance Between The Holes In The Rear Feet In The Direction Transverse: 420.00 Mm - Distance Between The Tip Of The Suction Flange And The Axis Of The Discharge Flange In The Longitudinal Direction: 176.00 Mm - Distance Between The Tip Of The Suction Flange And The Axis Of The Discharge Flange In The Transverse Direction: 325. 00 Mm (Side Exit) - Total Height In Relation To The Base Of The Feet: 660.00 Mm - Height From The Axis To The Base Of The Feet: 300.00 Mm., 00 Mm - Distance Between The Holes Of The Front Feet In The Transverse Direction: 560. 00 Mm - Distance Between The Holes Of The Rear Feet In The Transverse Direction: 420.00 Mm - Distance Between The Tip Of The Suction Flange And The Axis Of The Discharge Flange In The Longitudinal Direction: 176.00 Mm - Distance Between The Tip Of The Suction Flange And The Suppression Flange Axis In Transverse Direction: 325.00 Mm (Side Exit) - Total Height In Relation To The Base Of The Feet: 760.00 Mm - Height Of The Shaft To The Base Of The Feet: 400
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
