File For Hanging Folders. Structure: Steel File For Hanging Folders, 1335Mm High, With 4 Drawers, Mounted On Telescopic Rails That Allow Total Opening. The Furniture Must Be Equipped With Leveling Shoes On The Base. Zamac Handles In 96Mm Steel Finish (See References). Cylindrical Drum Lock (Minimum 4 Pins) With Simultaneous Drawer Locking System. Duplicate Keys. Stamped Or Overlaid Label Holder, The Latter Being Exclusively Made Of Chromed Or Nickel-Plated Non-Ferrous Metal Alloy. Painting In Epoxy/Polyester Hybrid Powder Paint, Glossy Electrostatic, Polymerized In An Oven, And Other Descriptions As Per The Notice., 2-Door Steel Cabinet Structure: Steel Cabinet, 1600Mm High, Divided Vertically Into 2 Compartments By Means Of Dividers With Independent Doors, Equipped With 3 Removable And Adjustable Shelves In Each Compartment. Steel Sheet Sae 1010/1020. - Body, Dividers And Doors In Sheet Metal 22 (0.75Mm); - Shelves And Door Reinforcement In Sheet Metal 20 (0.90Mm); - Plate Base 18 (1.25Mm); - Door Locking Bars Ø = 1/4” (Minimum); - 14 Sheet Metal Hinges (1.9Mm). Each Door Has Access To An Independent Compartment, Separated By A Vertical Partition. Three Shelves Per Compartment, Removable And Adjustable. Internal Hinges Not Visible. Handle And, 6-Door Steel Cabinet Structure: Steel Cabinet, 1970Mm High, 6 Overlapping Compartments In 3 Horizontal Rows And 2 Vertical Rows Equipped With Independent Doors And Locks. Steel Sheet Sae 1010/1020. - Body, 75Mm); - Compartment Flooring In 20 Sheet Metal (0.90Mm); - Metal Feet 16 (1.50Mm); - 14 Sheet Metal Hinges (1.9Mm); - Hook-Shaped Hangers - Plate 14 (1.9Mm). Internal Hinges Not Visible On The Exterior Of The Furniture. “Yale” Type Cylindrical Barrel Lock. Duplicate Keys Attached To Corresponding Door. Printed Or Overlaid Label Holder, The Latter Being Exclusively Made Of Non-Metallic Alloy, Double-Sided Library Shelf With 10 Shelves In Gray Color: Double-Sided Library Shelf, With 10 Shelves And A Base, 10 Of Which Are Removable And Adjustable With Double Folding In The Longitudinal Direction, Forming 06 Spans. Structure: Product Made Of Cold-Rolled Steel Sheet Sae 1006/1008. 10 Shelves Measuring 1007 Mm , Lateral And Longitudinal Flaps Functioning As A Protection Against Falling Deposited Materials. Each Shelf Supports Up To 60 Kg, With 40 Kg Being Recommended To Maintain Safety. Steel Shelving Open Bottom And Side Shelves, With 06 Removable And Adjustable Shelves With Double Folding In The Longitudinal Direction, Forming 05 Spans. Structure: Product Made Of Cold-Rolled Steel Sheet Sae 1010/1020. 6 Removable And Adjustable Shelves Measuring 920 Mm 30Mm Flaps Made From Sheet Metal #16 (1.50Mm Thick), Equipped With 8Mm Diameter Holes, Arranged Vertically, 50Mm Equidistant, Designed To Allow Adjustment, Fly-Wheel Drawer Structure: Drawer Composed Of Upper And Pediment Pieces, Lower And Rear Of Particleboard Wood (Mdp), With Esp
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
